• Title/Summary/Keyword: MAT1A

Search Result 605, Processing Time 0.025 seconds

Grain Boundary Trap Levels in ZnO-based Varistor (ZnO계 바리스터의 입계포획준위)

  • Kim, Myung-Chul;Park, Soon-Ja
    • Korean Journal of Materials Research
    • /
    • v.2 no.1
    • /
    • pp.12-18
    • /
    • 1992
  • The trap levels of ZnO-based varistor are obtained by Isothermal Capacitance Transient Spectroscopy method. Here ICTS measuring system consists of YHP 4192A Impedance Analyzer and a personal computer for the data acquisition. Between $-40^{\circ}C$ and $60^{\circ}C$, the grain boundary trap levels of 0.48 and 0.94eV were detected for $ZnO-Bi_2O_3-MnO$ system. The hole omission spectra are observed in the case of the addition of CoO into the $ZnO-Bi_2O_3$ system, while the electron emission spectra are detected in the case of the addition of MnO. The nonlinear resistance coefficient $\alpha$ increases with the decrease of the dormer concentration. Finally, the trap level density of $ZnO-Bi_2O_3-MnO$ system is found to decrease with the amount of CoO, while $\alpha$ is found to increase with the amount of CoO.

  • PDF

Effects of Low Temperature Annealing at Various Atmospheres and Substrate Surface Morphology on the Characteristics of the Amorphous $Ta_2O_5$ Thin Film Capacitors (여러 분위기에서의 저온 열처리와 폴리머 기판의 표면 morphology가 비정질 $Ta_2O_5$ 박막 커패시터의 특성에 미치는 영향)

  • Jo, Seong-Dong;Baek, Gyeong-Uk
    • Korean Journal of Materials Research
    • /
    • v.9 no.5
    • /
    • pp.509-514
    • /
    • 1999
  • Interest in the integrated capacitors, which make it possible to reduce the size of and to obtain improved electrical performance of an electronic system, is expanding. In this study, $Ta_2$O\ulcorner thin film capacitors for MCM integrated capacitors were fabricated on a Upilex-S polymer film by DC magnetron reactive sputtering and the effects of low temperature annealing at various atmospheres and substrate surface morphology on the capacitor characteristics were discussed. The low temperature($150^{\circ}C$) annealing produced improved capacitor yield irrespective of the annealing at mosphere. But the leakage current of the $O_2$-annealed film was larger than that of any other films. This is presumably mosphere. But the leakage current of the $O_2$-annealed film was larger than that of any other films. This is presumably due to the change of the $Ta_2$O\ulcorner film surface by oxygen, which was explained by conduction mechanism study. Leakage current and breakdown field strength of the capacitors fabricated on the Upilex-S film were 7.27$\times$10\ulcornerA/$\textrm{cm}^2$ and 1.0 MV/cm respectively. These capacitor characteristics were inferior to those of the capacitors fabricated on the Si substrate but enough to be used for decoupling capacitors in multilayer package. Roughness Analysis of each layer by AFM demonstrated that the properties of the capacitors fabricated on the polymer film were affected by the surface morphology of the substrate. This substrate effect could be classified into two factors. One is the surface morphology of the polymer film and the other is the surface morphology of the metal bottom electrode determined by the deposition process. Therefore, the control of the two factors is important to obtain improved electrical of capacitors deposited on a polymer film.

  • PDF

Formation of Ti-B-N-C Ceramic Composite Materials via a Gas-Solid Phase Reaction

  • Yoon, Su-Jong
    • Korean Journal of Materials Research
    • /
    • v.16 no.1
    • /
    • pp.50-57
    • /
    • 2006
  • Phase mixtures of Titanium boride, nitride, and carbide powder were produced by the reduction of a mixture of titanium and boron oxides with carbon via a gas-solid phase reaction. Boron oxides produce a vapour phase or decompose to a metal sub-oxide gaseous species when reduced at elevated temperature. The mechanism of BO sub-oxide gas formation from $B_2O_3$ and its subsequent reduction to titanium diboride for the production of uniform size hexagonal platelets is explained. These gaseous phases are critical for the formation of boride, nitride and carbide ceramics. For the production of ceramic phase composite microstructures, the nitrogen partial pressure was the most critical factor. Some calculated equilibrium phase fields has been verified experimentally. The theoretical approach therefore identifies conditions for the formation of phase mixtures. The thermodynamic and kinetic factors that govern the phase constituents are also discussed.

Walking Analysis in Dementia using GAITRite Ambulation System (GAITRite보행시스템을 이용한 치매노인의 보행분석)

  • Kim, Jong-Min;Kim, Jin-Ju;Park, Su-Yeon;Cha, Jae-Hyeon;Kim, Min-Jung;Kim, Jin-A
    • Journal of Korean Clinical Health Science
    • /
    • v.5 no.1
    • /
    • pp.816-824
    • /
    • 2017
  • Purpose. This study was classified into normal and demented elderly through K-MMSE. The purpose of this study was to analyze gait characteristics of normal elderly and demented peoples using GAITRite walking system. Methods. The subjects of this study were selected as elderly people receiving home visit physical therapy. An independent t-test was conducted to verify the statistical significance of the time-space variables of the elderly with dementia. Results. Step time(p=0.041), cycle time(p=0.037), distance(p=0.024), and cadence(p=0.048) were significantly shorter in the normal elderly than in the demented elderly on flat place. The mean age was significantly longer in normal elderly than in elderly persons with dementia. Step time(p=0.022), cycle time(p=0.023), distance(p=0.019), and cadence(p=0.015) were significantly shorter in the mat walking. The mean age was significantly longer in normal elderly than in elderly patients with dementia. Stretch time, cycle time, distance, and hair support time were significantly shorter in the mat walking. The mean age of the elderly was significantly longer than that of the elderly with dementia. The spinal support time, which is a spatial variable, was significantly shorter in the normal elderly than in the demented elderly. Conclusions. It compares the various gait characteristics of the normal and demented elderly people, thereby increasing the walking ability of the elderly person more effectively. This study should be utilized as basic data for preventing fall-down.

A Study on Taper Etching of Polysilicon-Part I : The Experimental Study (다결정실리콘의 경사식각에 관한 연구 - 제 1 부 : 실험적 고찰)

  • Lee, Jung-Kyu;Suh, Dong-Ryang;Byun, Jae-Dong
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.26 no.7
    • /
    • pp.50-57
    • /
    • 1989
  • Tapered etching of polysilicon films has been achieved by implanting phosphorus ions into the polysilicon film and using plasma etch in either $CF_4-O_2\;or\;SF_6$. A two-step plasma etching method is also proposed to control the taper angle of the etched edge without changing the implantion conditions. The taper angle is determined by the ratio of the etch rate of the undamaged region to that of the damaged top region of the polysilicon layer. The ratio is found to be dependent on the implantion dose, the implantion energy and the anisotropy of etching. The minimum angle in our experiments is about $10^{\circ}$. When the two-step etching method is employed, the taper angles can be controlled from the minimum angle up to about $55^{\circ}$.

  • PDF

THE GROUP OF GRAPH AUTOMORPHISMS OVER A MATRIX RING

  • Park, Sang-Won;Han, Jun-Cheol
    • Journal of the Korean Mathematical Society
    • /
    • v.48 no.2
    • /
    • pp.301-309
    • /
    • 2011
  • Let R = $Mat_2(F)$ be the ring of all 2 by 2 matrices over a finite field F, X the set of all nonzero, nonunits of R and G the group of all units of R. After investigating some properties of orbits under the left (and right) regular action on X by G, we show that the graph automorphisms group of $\Gamma(R)$ (the zero-divisor graph of R) is isomorphic to the symmetric group $S_{|F|+1}$ of degree |F|+1.

Characteristics of $\textrm{Al}_2\textrm{O}_3$-CaO Refractory Prepared from Oyster Shells (굴패각으로부터 제조된 $\textrm{Al}_2\textrm{O}_3$-CaO내화물의 특성)

  • Ryu, Su-Chak;Park, Hong-Chae
    • Korean Journal of Materials Research
    • /
    • v.8 no.1
    • /
    • pp.23-26
    • /
    • 1998
  • 알루미나와 하소된 귤껍질의 소결반응에 의해 A $I_{2}$ $O_{3}$-CaO내화물이 제조되었다. 치밀화과정에서의 CaO의 영향과 A $I_{2}$ $O_{3}$-CaO 소결체의 특성을 고찰하였다. 소결체의 미세구조와 EDS 결과로 A $I_{2}$ $O_{3}$-CaO화합물을 확인하였다. 145$0^{\circ}C$에서 열처리한 소결체는 2.87/㎤의 부피비중과 12.03%의 겉보기 기공율을 가지며 압축강도는 312kg/$\textrm{cm}^2$이였다. 140$0^{\circ}C$에서 서결체의 열팽창 계수는 6.55Kx10$_{-6}$ $K_{-1}$이였다.

  • PDF

Cytochalasin E Production by Rosellinia necatrix and Its Pathogenicity on Apple (사과흰날개무늬병균의 Cytochalasin E 독소 생산과 병원성)

  • Lee, Dong-Hyuk;Choi, Kyung-Hee;Uhm, Jae-Youl
    • Research in Plant Disease
    • /
    • v.15 no.1
    • /
    • pp.46-50
    • /
    • 2009
  • Cytochalasin E (CE) is a secondary metabolite secreted by Rosellinia necatrix, caused by white root rot, and has toxicity to apple as a toxin during disease progress. This study was conducted to demonstrate the relationship between the production of CE and its pathogenicity. CE producing isolates and non-producing isolates of R. nectatrix were isolated from the mycerial mat of diseased roots and was detected on that using a TLC and HPLC analysis and in vivo pathogenicity test. CE non-producing isolates were not pathogenic to apple roots and not detected CE by TLC and HPLC analysis. It was shown that the production of CE was related to the pathogenicity of R. nectatrix.

Development of Algorithm for Wear Volume Evaluation using Surface Pronto Analysis (표면 Profile 해석을 이용한 마멸량 계산 알고리즘 개발)

  • 김형규;김선재
    • Tribology and Lubricants
    • /
    • v.17 no.1
    • /
    • pp.33-39
    • /
    • 2001
  • A method of calculating wear volume is developed using the signal processing technique. The lowpass filter with Fourier transform and the “windowing” are implemented in the method. User-defining feature is also included in determining the cutoff frequency of the low-pass filter and the baseline for the volume integration. Commercial software, MatLab, is used for the programming. Since the method uses the original wear data without simplifying the wear shape, it can give a further accurate result than the previously utilized methods, which often adopted the simplification. It becomes further powerful if the contacting body has a general shape rather than that gives well-formed surface traction (e.g., the Hertzian). The validation of applying the average surface roughness, Ra, to the “windowing” and the baseline for volume integration is discussed.

GzRUM1, Encoding an Ortholog of Human Retinoblastoma Binding Protein 2, is Required for Ascospore Development in Gibberella zeae

  • Kim, Hee-Kyoung;Lee, Yin-Won;Yun, Sung-Hwan
    • The Plant Pathology Journal
    • /
    • v.27 no.1
    • /
    • pp.20-25
    • /
    • 2011
  • Gibberella zeae (anamorph: Fusarium graminearum), a homothallic (self-ferile) ascomycete with ubiquitous geographic distribution, causes serious diseases in several cereal crops. Ascospores (sexual spores) produced by this fungal pathogen have been suggested as the main source of primary inoculum in disease development. Here, we report the function of a gene designated GzRUM1, which is essential for ascospore formation in G. zeae. The deduced product of GzRUM1 showed significant similarities to the human retinoblastoma (tumor suppressor) binding protein 2 and a transcriptional repressor, Rum1 in the corn smut fungus (Ustilago maydis). The transcript of GzRUM1 was detected during the both vegetative and sexual stages, but was more highly accumulated during the latter stage. In addition, no GzRUM1 transcript was detected in a G. zeae strain lacking a mating-type gene (MAT1-2), a master regulator for sexual development in G. zeae. Targeted deletion of GzRUM1 caused no dramatic changes in several traits except ascospore formation. The ${\Delta}$GzRUM1 strain produced perithecia (sexual fruit bodies) but not asci nor ascospores within them. This specific defect leading to an arrest in ascospore development suggests that GzRUM1, as Rum1 in U. maydis, functions as a transcriptional regulator during sexual reproduction in G. zeae.