• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.12
• /
• pp.1295-1301
• /
• 2013

The cause of flow mark defect is known as non-uniform temperature of mold surface when the flow front meets the cold cavity. The exact definition and classification of Flow mark is not clear because the mechanism of flow mark is not figured out till now. Any injection molding analysis software can not predict the flow mark phenomena. To solve weldline and flow mark defects, the gate thickness is reduced to increase the melt front velocity and the melt front velocity of the flow mark area is increased from 82.3mm/s to 104.7mm/s. In addition, the bulk temperature of the flow mark area is increased from $178.3^{\circ}C$to $215.2^{\circ}C$ by adding a cold slug well. The flow mark phenomena can be greatly reduced by increasing the flow front velocity and elevating the bulk temperature.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04b
• /
• pp.568-570
• /
• 2001

fiducial mark는 PCB 정밀조립/검사 장비에서 위치보정을 위해 필수적으로 사용되는데, 실제 생산현장에서의 fiducial mark의 품질은 완전하지 않고, 손상된 상태인 경우가 많이 발생한다. 기존에 주로 사용되는 blob centroid 방법에 의한 mark의 위치추출은 mark의 상태가 손상되었을 경우, 큰 오차를 수반하게 된다. 본 논문에서는 Generalized Hough Transform을 이용한 fiducial mark의 중심위치 기법을 개발하여, 적용한 결과 손상된 mark에 대해서도 매우 강건한 결과를 보여주었다.

• Current Photovoltaic Research
• /
• v.5 no.2
• /
• pp.59-62
• /
• 2017

Surface texturing is affected the uniformity and size of pyramid with saw mark defect density. To analysis the influence of the saw mark defect density, we textured various si wafer. When the texturing process proceeds without the saw mark removal, silicon wafer of low-saw mark defect density showed small pyramid size of $3.5{\mu}m$ with the lowest average value of the reflectance of 10.6%. When texturing carried out after removal of the saw mark using the TMAH solution, we obtained a reflectance of about 11% and the large pyramid size of $5{\mu}m$. As a result, saw mark wafers showed a better pyramid structure than saw mark-free wafer. This result showed that saw mark can take place more smooth etching by the KOH solution and saw mark-free wafer is determined to be a factor that have a higher reflectance and a large pyramid.

• Restorative Dentistry and Endodontics
• /
• v.35 no.6
• /
• pp.453-460
• /
• 2010

Objectives: To evaluate the accuracy and consistency of two different apex locators at both the Apex and 0.5 marks. Materials and Methods: Twenty-six root canals was scheduled for extraction for periodontal or prosthodontic reasons. Thirteen canals were measured using Root ZX and the rest by i-ROOT. The root canal length was measured both the at 0.5 mark and the Apex mark. The file was then fixed to the toot, and the distance from the file tip to the major foramen of each canal was measured after removing the root dentin under the microscope so that the major foramen and the file tip were seen. Results: 1. When the Apex mark was used, 100% of both the Root ZX and i-ROOT groups were within 0.5 mm of the major foramen. 2. When 0.5 mark was used, 100% of the Root ZX group and 77% of the i-ROOT group were within 0.5 mm of the major foramen. 3. In terms of standard deviation and quartile value, the Apex mark was more consistent than 0.5 mark in the Root ZX group, and 0.5 mark was more consistent in the i-ROOT group, but there was no statistically significant difference when compared with t-test. 4. The root canal length difference between the Apex mark and 0.5 mark was 0.22 mm and 0.46 mm in the Root ZX and i-ROOT groups, respectively. Conclusions: In this study, the Apex mark was the more consistent mark. Therefore, it is recommended to subtract 0.5 mm, which is the average length between the apex and apical constriction, from the root canal length at the Apex mark to obtain the working length clinically.

• Restorative Dentistry and Endodontics
• /
• v.33 no.1
• /
• pp.20-27
• /
• 2008

The purpose of this study was to evaluate the consistency of two electronic apex locators in vitro model. Materials consisted of fifty two extracted premolars and two electronic apex locators; Root ZX (J. Morita, Osaka, Japan) and E-Magic Finder Deluxe (S-Denti. Cheonan, Korea). After access preparation, the teeth were embedded in a saline-mixed alginate model. Canal lengths of each tooth were measured at "0.5" and "Apex" mark of the apex locators, respectively so that each tooth had two measurements from 0.5 and Apex points. The file was fixed at final measurement using a glass ionomer cement. The apical 4 mm from the apex was exposed to measure the distance from the file tip to the major apical foramen of each tooth. Average distances and standard deviations were used to evaluate the consistency. Results showed that all measurements of both Root ZX and E-Magic Finder located the major foramen the range of ${\pm}0.5\;mm$ level. Both apex locators showed better consistency at Apex mark than at 0.5 mark. The average distance of file tip-major foramen was - 0.18 mm at 0.5 mark and - 0.07 mm at Apex mark in Root ZX, - 0.25 mm at 0.5 mark and - 0.02 mm at Apex mark in E-Magic Finder. Standard deviation was 0.21 at 0.5 mark and 0.12 at Apex mark in Root ZX, 0.12 at 0.5 mark and 0.09 at Apex mark in E-Magic Finder.

• Electronics and Telecommunications Trends
• /
• v.30 no.1
• /
• pp.154-161
• /
• 2015

본고에서는 Q-mark 모델의 R&D(Research & Development) 품질 영향 분석을 기술한다. 이를 위해 Q-mark 모델 특징과 종류 그리고 절차를 간략히 기술하고, R&D 품질에 대한 Q-mark 인증 모델 영향에 대해 연구현장 설문조사 내용을 바탕으로 연구결과 완성도 측면, 대외 신뢰도 개선을 통한 과제 수주 측면, 기술 이전과 사업화 측면, 그리고 과제관리 효율화 측면 등에서 분석하여 제시한다. 또 앞으로 Q-mark 모델이 보다 객관적이고 효과적인 R&D 품질관리를 위한 인증 모델로 개선되고 지속적으로 운영되기 위해 보완되어야 할 사항에 대해 설문조사 결과를 바탕으로 인증 측면, 프로세스 범주 측면, 제공 템플릿 측면, 그리고 품질 지원 서비스 및 전문성 측면에서 기술한다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.331-334
• /
• 2002

의사잡음 시퀀스를 이용한 대역확산 기반의 오디오 워터마킹은 들리지 않으면서도 강인한 워터마크를 만들기 위해 심리음향모델이나 고정필터를 사용하여 의사잡음 시퀀스를 변형시킨다. 그런데, 이러한 방법을 이용하여 스펙트럼 변형된 의사잡음은 고주파 영역에 대부분의 에너지를 갖게 되므로 인위적으로 오디오 신호의 고주파 영역을 잘라내는 공격에 취약하다는 단점이 있다. 본 논문에서는 이러한 단점을 보안하고 강인성 및 잡음의 최소화를 위하여 중간값의 성질을 이용하여 의사잡음을 변형 후 삽입하는 워터마킹 시스템을 제안한다. 중간값 성질을 이용하여 변형한 의사잡음은 원 오디오 신호와의 상관성이 높으며 전주파수 대역에 고르게 분포하는 성질이 있으므로 고주파 영역의 공격에 강인하다. 제안 방법은 의사잡음의 고유성질을 최대로 살린 방법으로 각종 오디오 부호화, 부가잡음, 다운/업 샘플링, 채널변경, 진폭 공격과 같은 다양한 공격에도 워터마크 신호의 검출이 가능하다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.323-326
• /
• 2002

In this paper, we propose a watermarking technique that it is possible to winnow illegal contents from scattered contents on the internet. The identification is performed using an embedded unique content ID by the watermarking technique. The proposed watermarking technique accepts A/D-D/A conversion and a lot of lossy compression such as MP3, AAC, WMA and Real Audio. Watermark robustness is enabled using group quantization, selecting watermark inserting point, and error correction code. Test results show that the correct extraction is about $90\%$ and SNR is above $50\~60dB$. The above figures means that the proposed technique is able to extract encoded information at least one more times per audio and that it is very difficult to discriminate between a watermarked audio and a original audio.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.3
• /
• pp.125-132
• /
• 2018

KVN(Korean VLBI Network) introduced the Mark6 system of the MIT haystack observatory as a recorder for data recording up to 32 Gbps for VLBI(Very Long Baseline Interferometry) observation. The Mark6 recorder can record data at up to 32Gbps when two systems and 64 HDDs are installed. However, because of the unique recording method that is characteristic of Mark6, we are introducing a large amount of data into a virtual file system, or using a general RAID method, which causes data loss when reading and transferring files at the highest recording speed or file system have. The Flexbuff system, a software recorder developed by JIVE(Joint Institute for VLBI ERIC), can be configured to operate as a data recorder through RAID configuration and network upgrades. In particular, when installed in the Mark6 system, it can record VLBI data at a maximum speed of 32 Gbps with less loss of data compared to the existing Mark6 by utilizing Mark6 resources well. In this paper, we propose that the existing Mark6 system can be operated as Mark6-Flexbuff by installing jive5ab software, and it is verified through experiment that it can be effectively used for VLBI observation operation through data recording test.

• Journal of Advanced Research in Ocean Engineering
• /
• v.1 no.4
• /
• pp.211-226
• /
• 2015

Membrane type Mark III cargo containment system (CCS) is considered in this study to investigate its strength capability under applied loads due to liquefied natural gas (LNG) cargo. A rectangular plated structure supported by inner hull structure is exemplified from Mark III CCS according to classification society's guidance and it is assumed as multi-layered structure by stacking plywood, triplex, reinforced polyurethane (PU) foam and series of mastic upon inner hull structure. Commercially available general purpose finite element analysis package is used to have reliable FE models of Mark III CCS plate. The FE models and anisotropic failure criteria such as maximum stress, Hoffman, Hill, Tsai-Wu and Hashin taking into account the direction dependent material properties of Mark III CCS plate components and their material properties considering a wide variation of temperature due to the nature of LNG together form the strength analysis procedure of Mark III CCS plate. Strength capability of Mark III CCS plate is understood by its initial failure and post-initial failure states. Results are represented in terms of failure loads and locations when initial failure and post-initial failures are occurred respectively. From the results the basic design information of Mark III CCS plate is given.