• 제목/요약/키워드: M152

검색결과 811건 처리시간 0.027초

다공성 그물구조 음극을 이용한 구리 전착에 관한 연구 (I) - 전해질 중의 구리 이온 농도의 영향 - (Electrodeposition of Copper on Porous Reticular Cathode(1) - Effect of Cupric Son Concentration -)

  • 이관희;이화영;정원용
    • 전기화학회지
    • /
    • 제3권3호
    • /
    • pp.152-156
    • /
    • 2000
  • 그물구조 다공성 금속을 황산과 황산구리 수용액을 전해질로 사용하여 전기화학적으로 제조하였으며, 이때 균질 전착에 영향을 미치는 구리이온 농도에 대해 살펴보았다. 전해질 중의 황산에 대한 구리이온의 농도비가 감소하면 전해질의 점성이 감소하여 전기전도도의 향상을 가지고 오며, 분극도(polarizability)의 상승을 유발시켜 균일 전류밀도 분포력(throwing power)을 향상시키는 효과를 나타내었다. 그물구조 다공성 금속을 제조하기 위한 최적의 조건은 한계 전류밀도와 균일 전류밀도 분포력을 고려하여 결정되어야 하며, 인가전류가 $10mA/cm^2$일 때 0.2M $CuSO_4\cdot\;5H_2O+0.5\;H_2SO_4$임을 확인하였다.

nSSR 마커를 이용한 한라산 영실 구상나무의 유전다양성을 고려한 표본추출전략 (A Sampling Strategy Considering Genetics Diversity of Abies Koreana in Yeongsil, Mt. Halla Using nSSR Makers)

  • 채승범;임효인
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 2019년도 추계학술대회
    • /
    • pp.27-27
    • /
    • 2019
  • 본 연구는 멸종위기 아고산수종 구상나무의 보존 복원을 위한 유전다양성을 고려한 표본추출전략을 구명하는데 그 목적이 있다. 2019년 9월에 한라산 영실 집단($14,000m^2$)에서 총 152개체를 대상으로 선발된 10개의 nSSR 마커를 이용하여 유전다양성 및 공간적 유전구조를 분석하였다. 평균 유전다양성은 관찰된 대립유전자수(A)가 7.2개, 유효대립유전자수($A_e$)가 3.6개, 이형접합도 관찰치($H_o$)가 0.528, 이형접합도 기대치($H_e$)가 0.595이며, 고정지수(F)는 0.071 이었다. 조사구내 구상나무 성목 152개체는 평균 수고 3.6 m, 흉고직경 17.3 cm로 나타났다. 구상나무의 개체목간 평균거리는 3.94 m, 임분밀도는 700 본/ha 이며 개체의 공간적 분포는 임의분포 형태로 나타났다. 구상나무의 유전변이에 대한 공간적 자기상관성(spatial autocorrelation) 분석 결과, 조사구의 구상나무는 약 15 m 이내에서 분포하는 개체들 간 유전적 유사성이 있게 분포하는 것으로 나타났으며 임분밀도가 높고 수고가 낮은 특성으로 인하여 비교적 작은 유전군락이 형성된 것으로 사료된다. 결과적으로 영실의 구상나무 집단의 보존 복원을 위한 표본추출전략은 15 m의 간격을 두고 개체를 선발하는 것이 타당한 것으로 나타났다.

  • PDF

Adsorption properties of activated carbon prepared from pre-carbonized petroleum coke in the removal of organic pollutants from aqueous solution

  • Ahmed, S.A. Sayed;El-Enin, Reham M.M. Abo;El-Nabarawy, Th.
    • Carbon letters
    • /
    • 제12권3호
    • /
    • pp.152-161
    • /
    • 2011
  • Activated carbon was prepared from pre-carbonized petroleum coke. Textural properties were determined from studies of the adsorption of nitrogen at 77 K and the surface chemistry was obtained using the Fourier-transform infrared spectrometer technique and the Boehm titration process. The adsorption of three aromatic compounds, namely phenol (P), p-nitrophenol (PNP) and benzoic acid (BA) onto APC in aqueous solution was studied in a batch system with respect to contact time, pH, initial concentration of solutes and temperature. Active carbon APC obtained was found to possess a high surface area and a predominantly microporous structure; it also had an acidic surface character. The experimental data fitted the pseudo-second-order kinetic model well; also, the intraparticle diffusion was the only controlling process in determining the adsorption of the three pollutants investigated. The adsorption data fit well with the Langmuir and Freundlich models. The uptake of the three pollutants was found to be strongly dependent on the pH value and the temperature of the solution. Most of the experiments were conducted at pH 7; the $pH_{(PZC)}$ of the active carbon under study was 5.0; the surface of the active carbon was negatively charged. The thermodynamic parameters evaluated for APC revealed that the adsorption of P was spontaneous and exothermic in nature, while PNP and BA showed no-spontaneity of the adsorption process and that process was endothermic in nature.

2X Converse Oversampling 1.65Gb/s/ch CMOS 준 디지털 데이터 복원 회로 (2X Converse Oversampling 1.65Gb/s/ch CMOS Semi-digital Data Recovery)

  • 김길수;김규영;손관수;김수원
    • 대한전자공학회논문지SD
    • /
    • 제44권6호
    • /
    • pp.1-7
    • /
    • 2007
  • 본 논문에서는 고성능 멀티미디어 인터페이스 (High Definition Multimedia Interface: HDMI) 용 수신기의 전력 절감과 면적 감소를 위한 2X converse oversampling 방식의 준 디지털 데이터 복원 회로를 제안한다. 제안하는 데이터 복원 회로는 2X converse oversampling 방식의 데이터 검출 알고리즘과 준 디지털 구조를 이용해 전력과 유효 면적을 효과적으로 감소시킨다. 제안하는 회로의 성능을 검증하기 위해서 0.18um CMOS 공정을 이용하여 칩이 제작되었으며, 측정 결과 14.4mW의 전력을 소모하고, $0.152mm^2$의 유효 면적을 차지하며, 0.7UIpp의 Jitter tolerance 성능을 나타내므로 HDMI용 수신기의 전체 전력과 유효면적을 효과적으로 감소시킬 수 있다.

중국 성인여성(中國 成人女性)의 ISO에 따른 의류치수규격 연구(衣類値數規格 硏究) (A Study on the Apparel Sizing System of ISO for Chinese Adult Women)

  • 손희순;위혜정;김은희;강연경
    • 패션비즈니스
    • /
    • 제10권1호
    • /
    • pp.58-78
    • /
    • 2006
  • This study materializes body type measurement based on ISO(International Standard Organization)size system, targeting 1381 Chinese women, and suggests clothes size standards. It provides basic information on Chinese women size for Korean clothes companies advanced in China to strengthen the national competitiveness of Korean clothing industry. First, after the body type examination, based on the ISO's drop value, the results of types are in its decreasing order: A, M, H, and D. Second, women upper garment sizes by body types are set in the section of height 152cm, 160cm, and 168cm. Garment sizes are suggested based on the section that has more than 0.8% of appearance rate for the survey target: A, H, and M. Third, the clothes sizes of women pants are set in the section of height 152cm, 160cm, and 168cm just with the same as the upper garment.

단부 및 중앙부 플랫플레이트의 철근 분배율에 따른 모멘트 재분배 실험 (Tests for Moment Redistribution in Flat Plates with Different Reinforcement Details according to End and Midspan Moment Distributions)

  • 최정욱;송진규
    • 콘크리트학회논문집
    • /
    • 제19권5호
    • /
    • pp.603-611
    • /
    • 2007
  • 동일한 총 정적 모멘트를 갖지만 단부 및 중앙부 모멘트 분배가 서로 다른 총 3개의 슬래브-기둥 내부 접합부를 실험하였다. 각 실험체는 4.2m 정사각형 슬래브와 356mm 정사각형 단면을 갖는 기둥으로 구성되며, 슬래브의 두께는 152mm이다. 실험 결과, 플랫플레이트 시스템은 비 균열 상태에서부터 최종 파괴 단계까지 상당히 큰 모멘트 재분배 현상이 나타나고, 극한 상태에서 실험체의 단부 및 중앙부 모멘트 분배는 설계에서의 철근 분배에 의해 크게 좌우되었다. 또한 이러한 모멘트 재분배 현상은 슬래브의 펀칭전단강도에 영향을 준다.

항공기 엔진 압축기 케이스의 드릴링 시 홀의 변형 해석에 관한 연구 (Study on Deformation Analysis of Holes during Drilling of Aircraft Engine Compressor Cases)

  • 박기범;조영태;정윤교
    • 한국기계가공학회지
    • /
    • 제17권3호
    • /
    • pp.65-70
    • /
    • 2018
  • M152, used for aircraft engine compressor cases, causes many problems in the cutting process due to its high hardness and high toughness. Characterized by a concave cylindrical center, aircraft engine compressor cases are thin but have multiple side holes to connect with internal parts. Thus, deformation occurs despite the jig sustaining the inside. The object of this study was to lessen the deformation arising from drilling by improving the drilling jig for aircraft engine compressor cases. To this end, an aircraft engine compressor case modeled with SolidWorks was analyzed with ANSYS under real conditions. Then, to secure reliability, the analyzed deformation was compared with the actual deformation. Based on the results, the effects of the improved drilling jig for aircraft engine compressor cases were verified.

헬멧형 뇌자도 장치의 센서 교정 (Sensor Calibration of a Helmet MEG System)

  • 권혁찬;김기웅;유권규;김진목;이용호
    • Progress in Superconductivity
    • /
    • 제12권1호
    • /
    • pp.57-61
    • /
    • 2010
  • We have developed a whole-head MEG system for basic brain research and clinical application. The sensor system consists of a 152 SQUID gradiometer array oriented and located in a suitable way to cover a whole head of the human. The system measures magnetic fields generated by neuronal currents in the brain to get information on the brain activities. For this purpose, the field sensitivity determined by the position, orientation and geometry of the pickup coil as well as amplification factor of the electronic circuits should be known precisely. However, the position and orientation of the pickup coil might be changed from the designed specifications during cool down of the dewar and it is necessary to characterize the field sensitivity. In this study, we made calibration systems to determine the actual position and orientation of the 152 pickup coils and compared the localization results of the N100m source in the auditory cortex.

Li+ and Li+I-Li+ ions Solvated by 1,4-dioxane: An ion Mobility Spectrometry-Mass Spectrometry Study

  • Choi, Yunseop;Ji, Inyong;Seo, Jongcheol
    • Mass Spectrometry Letters
    • /
    • 제12권4호
    • /
    • pp.152-158
    • /
    • 2021
  • Electrospray ionization (ESI) and ion mobility spectrometry-mass spectrometry (IMS-MS) were employed to investigate the solvated structures of ionic species in the lithium iodide electrolyte solution in the gas phase. The Li+I-Li+ triple ion and single standalone Li+ ions solvated by 1,4-dioxane were successfully generated and observed by ESI-MS under the influence of dioxane vapor at the inlet region. Under the present experimental condition, (1,4-dioxane)m·Li+ complex ions (m = 1, 2, and 3) and a (1,4-dioxane)·Li+I-Li+ complex ion were observed, which were further examined by IMS to investigate their structures. The presence of multiple structural isomers was confirmed, which accounts for the endothermic conformational transition of 1,4-dioxane from a chair to a boat to achieve bidentate O-donor binding to Li+ and Li+I-Li+. Further structural details critical for the ion-solvent interactions were also examined and discussed with the help of density functional theory calculations.