DOI QR코드

DOI QR Code

Tests for Moment Redistribution in Flat Plates with Different Reinforcement Details according to End and Midspan Moment Distributions

단부 및 중앙부 플랫플레이트의 철근 분배율에 따른 모멘트 재분배 실험

  • Published : 2007.10.31

Abstract

Three interior slab-column connections designed by equal static moments and by different distribution of end and midspan moments were tested. Each test specimen consists of a 4.2 m square slab and a 355 mm square column stub. The slab thickness is 152 mm. Test results showed not only that flat plate systems can undergo considerable redistribution of moments from the uncracked state to final maximum capacity, but also that the distribution of moments is controlled largely by the distribution of reinforcement adopted by the designer. Tests also indicated that the punching shear strength of slabs can be affected by the redistributed moments.

동일한 총 정적 모멘트를 갖지만 단부 및 중앙부 모멘트 분배가 서로 다른 총 3개의 슬래브-기둥 내부 접합부를 실험하였다. 각 실험체는 4.2m 정사각형 슬래브와 356mm 정사각형 단면을 갖는 기둥으로 구성되며, 슬래브의 두께는 152mm이다. 실험 결과, 플랫플레이트 시스템은 비 균열 상태에서부터 최종 파괴 단계까지 상당히 큰 모멘트 재분배 현상이 나타나고, 극한 상태에서 실험체의 단부 및 중앙부 모멘트 분배는 설계에서의 철근 분배에 의해 크게 좌우되었다. 또한 이러한 모멘트 재분배 현상은 슬래브의 펀칭전단강도에 영향을 준다.

Keywords

References

  1. Rangan, B. V. and Hall, A. S., 'Moment Redistribution in Flat Plate Floors', ACI Journal, Vo.81, No.6, 1984, pp.601-608
  2. CEB-FIB, 'Punching of Structural Concrete Slabs', CEB-FIB Technical Report, Bulletin 12, April, 2001
  3. 한국콘크리트학회, '콘크리트구조설계기준 해설', 한국콘크리트학회, 2003
  4. ACI Committee 318, Building Code Requirements for Structural Reinforced Concrete, American Concrete Institute, Detroit, MI, 2002
  5. EC2, Design of Concrete Structures Part1: General Rules and Rules for Buildings, European Committee for Standardization Brussels, Oct. 1991
  6. CEB-FIP 1990, Design of Concrete Structures, CEB-FIP-Model-Code 1990, Thomas Telford, 1993
  7. ASCE-ACI Committee 445 on Shear and Torsion, 'Recent Approaches to Shear Design of Structural Concrete', Journal of Structural Engineering, Vol.124, No.12, 1998, pp.1375-1417 https://doi.org/10.1061/(ASCE)0733-9445(1998)124:12(1375)
  8. Rangan, B. V. and Hall, A. S., 'Moment and Shear Transfer Between Slab and Edge Column', ACI Journal, Vol.80, No.3, 1983, pp.183-191
  9. Alexander, S. D. B. and Simmons, S. H., 'Tests of Column-Flat Plate Connections' , ACI Structure Journal, Vol.89, No.5, 1992, pp.495-502
  10. Rankin, G. I. B. and Long, A. E., 'Predicting the Enhanced Punching Strength of Interior Slab-Column Connections', Proc. of the Institution of Civil Engr., Vol.82, Part1, Dec. 1987, pp.1165-1186