• 한국환경농학회지
• /
• 제30권4호
• /
• pp.377-381
• /
• 2011

본 연구는 논에서 돈분 액비 활용시 담수 시기에 따른 암모니아 휘산량을 평가하였다. 담수 상태에서 돈분 액비 시용은 142.0 mg/$m^2$ 의 암모니아 휘산량을 보인 반면, 돈분액비시용 1일 및 3일 후 담수시 암모니아 휘산량은 29.6, 25.4 mg/$m^2$ 였다. 그리고 담수 상태에서 돈분액비 시용이 돈분액비 시용 후 담수에 비해 높은 암모니아 휘산량을 보인 것은 암모니아가 토양교질에 흡착되지 않고 수중에 높은 농도로 존재하기 때문인 것으로 나타났다. 따라서 논에서 돈비 액비 활용시 암모니아 휘산량 저감에 의한 질소 이용도 향상을 위해서는 돈분액비 살포 최소 1일 후 담수하는 것이 좋을 것으로 판단된다.

• 수산해양기술연구
• /
• 제44권4호
• /
• pp.282-293
• /
• 2008

In order to develop the substitutive materials for natural baits of swimming crab pots, the attracting effects of swimming crab such as the preference of baits which were made of the by-products of marine and stock raising through the water tank experiments and fishing experiments. On the investigation of mean entrapped catch number to the pot by the baits after putting the 4 kinds of baits, mackerel(M), mackerel with grinded mackerel s internals($MM_I$), mackerel with tuna s internals$MM_I$) and makerel with grinded krill(MK) each in one pot by turns, $MM_I$ and MK were entrapped mean 3.9(13.0%) and they were a little more comparing to M, and $MT_I$ is least with mean 2.1(7.0%)(F=12.913, P < 0.05). Otherwise, on the preference investigation of swimming crabs by the baits after putting the 4 kinds of baits in the 4 pots each, M was entrapped mean 3.0(10%), but $MM_I$, $MT_I$ and MK were mean 1.2(4.0%), 1.0(3.3%) and 1.5(5.0%) each and they were only 30-50% of M(F=13.398, P < 0.05). On the preference investigation of swimming crabs by the 5 kinds of baits, mackerel(M), and krill(K), manila clam($M_C$), pig s fat($P_F$) and chicken s head($C_H$) which were used in substitutive baits, M was entrapped mean 3.2(10.7%), but K was about 50% of catch of M with mean 1.6(5.3%), and $M_C$, $P_F$ and $C_H$ were very few with mean 0.1-0.2(0.3-0.7%)(F=89.186, P < 0.05). On the preference investigation of swimming crabs by the pots which were put each the 3 kinds of baits, original krill(K), grinded krill with gluten and soybean oil cake($K_GGS$) and grinded krill with gluten, soybean oil cake and glycine($K_GGSG_L$) in the blue fluorescent hexahedral plastic bait cages(BF), and which were put the mackerel(M) in the non-fluorescent hexahedral red plastic bait cage($RF_N$), it was entrapped mean 3.0(10.0%) in the pot which was put the mackerel in the $RF_N$, and the same level in the pots which were put the K and $K_GGSG_L$ in the BF, but it was mean 2.0(6.7%) in the pots which was put the $K_GGS$ in BF and it was decreased by 30% of catch comparing to $RF_N$(F=3.750, P < 0.05). On the preference investigation of swimming crab by the pots which was put grinded tuna with gluten, soybean oil cake and glycine($T_IGSG_L$) in the blue fluorescent hexahedral plastic bait cage(BF), and which was put mackerel(M) in the nonfluorescent hexahedral red plastic bait cage($RF_N$), it was entrapped mean 3.3(11.0%) in the pot which was put mackerel in $RF_N$, and mean 2.7(9.0%) in the pot which was put $T_IGSG_L$ in BF and it was about 15% less comparing to use bait M(t=1.387, P < 0.05). As a results of fishing experiments, a plan for enhancing catching efficiency of $T_IGSG_L$ will be required because catching efficiency of $T_IGSG_L$, alternative bait, was half of fish catching efficiency of natural bait using mackerel. Fishing experiments were conducted 3 times using reinforced substitutive artificial bait that is reinforced attractive effect of $T_IGSG_L$ and composed of tuna intestine, grinded mackerel, gluten, soybean cake, glycine and alanine($T_IM_GGSG_LA$). Catching efficiency of $T_IM_GGSG_LA$ was about 80% of that of natural bait made of mackerel.

• Communications for Statistical Applications and Methods
• /
• 제3권2호
• /
• pp.275-282
• /
• 1996

A life distribution F with survival function $\overline{F}$=1-F, finite mean $\mu$ and mean residual life m(t) is said to be NBUE(NWUE) if m(t)$\leq$($\geq$) .$\mu$ for t$\geq$0. This NBUE property can equivalently be characterized by the fact that $\varphi$(u)$\geq$($\leq$)u for 0$\leq$u$\leq$1, where $\varphi$(u) is the scaled total-time-on test transform of F. A generalization of the NBUE properties is that there is a value of p such that $\varphi$(u)\geq.u$ for 0$\leq$u$\leq$p and $\varphi$(u)\leq$$\leq$u$\leq$1, or vice versa. This means that we have a trend change in the NBUE property. In this paper we point out an error of Klefsjo's paper (1988). He erroneously takes advantage of trend change point of failure rate to calculate the empirical test size and power in lognormal distribution. We solves the trend change point of mean residual lifetime and recalculate the empirical test size and power of Klefsjo (1988) in mocensoring case.

• Korean Membrane Journal
• /
• 제7권1호
• /
• pp.34-41
• /
• 2005

The wastewater discharged from a paper plant was filtrated by 3 kinds of tubular carbon ceramic UF and MF membranes with $N_2$-backflushing. The filtration time (FT) was fixed at 8 min or 16 min, and $N_2$-backflushing time (BT) was changed in 0${\~}$60 sec. The optimal condition was discussed in the viewpoints of total permeate volume ($V_T$), dimensionless permeate flux (J/Jo) and resistance of membrane fouling ($R_f$). In the viewpoints of $V_T$, J/Jo and $R_f$, the optimal $N_2$-BT was 40 sec at both FT for M9 (MWCO: 300,000 Daltons) and C005 ($0.05{\mu}m$) membranes. However, for C010 ($0.1{\mu}m$) it was 10 sec at FT=8 min, and 20 sec at FT=16 min in the viewpoints of J/Jo and $R_f$, and 5 sec at both FT in the viewpoints of $V_T$. It means that the short $N_2$-BT could reduce the membrane fouling and recover the permeate flux sufficiently for MF membrane having a large pore size as C010. Average rejection rates of pollutants were higher than $99.0\%$ for turbidity and $22.8{\~}59.6\%$ for $COD_{cr}$, but rejection rates of total dissolved solid (TDS) were lower than $8.9\%$. Therefore, the low turbidity water purified in our system could be reused for paper process.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.249-252
• /
• 2002

we have studied the characteristics of PHEMT's with gate recess etching method. The DC characterization of PHTMT fabricated with the wide single recess methods is a maximum drain current density of 319.4 ㎃/mm and a peak transconductance of 336.7 ㎳/mm. The RF measurements were obtained in the frequency range of 1~50GHz. At 50GHz, 3.69dB of 521 gain were obtained and a current gain cut-off frequency(f$_{T}$) of 113 CH and a maximum frequency of oscillation(f$_{max}$) of 172 Ghz were achieved from this device. On the other hand, a maximum drain current of 367 mA/mm, a peak transconduclancc of 504.6 mS/mm, S$_{21}$ gain of 2.94 dB, a current gain cut-off frequency(f$_{T}$) of 101 CH and a maximum frequency of oscillation(f$_{max}$) of 113 fa were achieved from the PHEMT's fabricated by the .narrow single recess methods.methods.

• 한국대기환경학회지
• /
• 제2권3호
• /
• pp.27-33
• /
• 1986

Atmospheric particulate matter (A. P. M.) was collected and size-fractionated by an Andersen high-volume air sampler over 15 month period from Jan. 1985 to Feb. 1986 in Seoul. The concentration of chloride, nitrate and sulfate were extracted in an ultrasonic bath and were analyzed by ion chromatography. The annual arithmetical mean of A. P. M. was 128.54 $\mug/m^3$. The concentration of anions were 2.88 $\mug/m^3$ for chloride, 3.86$\mug/m^3$ for nitrate, and 25.44$\mug/m^3$ for sulfate. The content of A. P. M. was lowest in the particle size range 1.1 $\sim 3.3\mum$ and increased as the particle size increased or decreased. And the anions exhibited a seasonal variation in the isize distribution. The contents of anions were higher in winter than summer. Ther ratio of fine particles to the total particles defined by F/T for chloride, nitrate and sulfate. The F\ulcornerT of these anion generally decrease with increasing air temperature. This tendency was prevalent in the chloride and nitrate.

• 대한방사선기술학회지:방사선기술과학
• /
• 제40권1호
• /
• pp.19-25
• /
• 2017

본 연구는 1.5 T와 3.0 T Magnetic Resonance Imaging에서 Bone-Anchored Hearing Aid (BAHA) implant의 수평인력, 회전력, 그리고 자화감수성 인공물의 크기를 표준측정 방법에 의해 측정하여 MR 안전성을 평가하였다. BAHA implant의 고정장치와 지지대는 0.5%의 철(iron)이 포함 된 티타늄으로 만들어졌으며, 길이는 10 mm (고정장치 4 mm, 지지대 6 mm), 최대 직경은 7.0 mm이다. 수평인력 측정장치와 자화감수성 인공물 측정장치는 각각 American Society for Testing and Materials (ASTM) F2052-06, F2119-07을 참조하여 아크릴을 이용해 제작했으며, 회전력 측정은 원형 플라스틱 용기를 이용한 측정장치를 사용하였다. 자기유도에 의한 BAHA implnat의 수평인력은 주자장이 가장 큰 지점인 96 cm지점에서 최대 변위각을 측정하였고, 회전력은 원형용기 내부의 $45^{\circ}$간격의 실선 위에 놓았을 때 나타난 회전형태를 정성적 평가기준으로 측정하였다. 자화감수성 인공물은 황산구리($CuS0_4$) 용액이 채워진 용기의 중앙에 BAHA implant를 매달아 영상을 획득한 후 Susceptibility Artifact Measurement (SAM) software를 이용해 크기를 측정하였다. 측정결과 수평인력은 1.5 T와 3.0 T에서 변위각과 변위력은 모두 0으로 나타났다. 회전력은 1.5 T에서는 0(no torque), 3.0 T에서는 +1(mild torque)로 나타났다. 자화감수성 인공물은 최소 13.20 mm, 최대 38.91 mm의 크기로 나타났다. 따라서 1.5 T, 3.0 T의 MR 환경에서 BAHA implant는 환자에게 안전하다.

• 한국자기학회지
• /
• 제14권5호
• /
• pp.169-173
• /
• 2004

$\alpha$-F $e_2$ $O_3$, 나노 입자를 균일한 크기로 제조하여 Morin 전이 온도( $T_{M}$)를 전 후로 스핀의 변화에 관하여 연구하였다. X-선 회절 분석과 입도분포 측정을 통하여 입자는 80nm정도의 매우 군일한 크기 분포를 하고 있음을 확인하였다. Mossbauer 분광기를 통하여 4.2K에서부터 실내온도까지 여러 온도 범위에 걸쳐 측정한 결과 입자의 크기에 따라 $T_{M}$온도가 변화되었고 스핀의 상태 역시 달라졌다. $T_{M}$은 $b_{ulk}$상태에서 265 K의 값을 가지고 있으나 입자의 크기가 작아질수록 낮아지고, 임계 크기 이하에서는 전이가 전혀 일어나지 않는다. 80nm크기의 입자에서, 스핀의 방향은 $T_{M}$ 이상의 온도에서는 정상적으로 hexagonal구조의 c축에 90$^{\circ}$ 이루고 있으나 $T_{M}$ 이하의 온도에서는 c 축에 나란하지 않고 일정한 각(28$^{\circ}$～29$^{\circ}$)을 유지하는데, 이 방향은 rhombohedral구조의 [110]에 해당하는 것으로 지금까지 알려진 0$^{\circ}$와 90$^{\circ}$사이의 스핀 전이와는 다른 모습을 보여주고 있다.

• 대한전자공학회논문지SD
• /
• 제41권9호
• /
• pp.19-24
• /
• 2004

우리는 3층 구조의 레지스터와 이중 노광 방법을 이용하여 유전체 지지대를 사용하지 않은 새로운 방법으로 게이트 길이가 70 nm인 T-게이트를 갖는 InGaAs/InAlAs/GaAs metamorphic HEMT 제작 하였다. 게이트 길이가 70 nm이고 게이트 단위폭이 70 ㎛인 2개의 게이트를 가지고 있는 MHEMT는 최대 포화 전류밀도가 최대 포화 전류밀도가 228.6 mA/mm, 상호전달 컨덕턴스는 645 mS/mm, 전류이득차단주파수가 255 GHz인 특성을 보였다.

• 대한수학회논문집
• /
• 제9권3호
• /
• pp.753-765
• /
• 1994

The linearly constrained quadratic programming(QP) considered is : $$ min f(x) = c^T x + \frac{1}{2}x^T Hx $$ $$ (1) subject to A^T x \geq b,$$ where $c,x \in R^n, b \in R^m, H \in R^{n \times n)}$, symmetric, and $A \in R^{n \times n}$. If there are bounds on x, these are included in the matrix $A^T$. The Hessian matrix H may be positive definite or negative semi-difinite. For large problems H and the constraint matrix A are assumed to be sparse.