• Korean Journal of Environmental Agriculture
• /
• v.30 no.4
• /
• pp.377-381
• /
• 2011

BACKGROUND: Ammonia emissions from field-applied livestock manure are considered a threat to the environment worldwide. In Korea, a large amount of liquid manure was applied in the rice field before rice transplanting in order to reduce chemical fertilizer use. This study was conducted to provide the optimal flooding time after liquid manure application in an attempt to minimize ammonia emission. METHODS AND RESULTS: Ammonia emission from paddy field applied with liquid pig manure following different flooding time was measured using the dynamic chamber method. The five treatments used were : application of liquid pig manure to paddy field in flooding condition (F0T); one day (F1T) and three days (F3T) after flooding; without flooding (NF), and flooding without the application of liquid pig manure (control). Among the treatment, the highest ammonia emission was observed in F0T. The cumulative ammonia emission of F1T and F3T for 12 days were very similar and were about 4.7 times less than that of the F0T treatment. CONCLUSIONS: Ammonia emission in paddy field could be significantly reduced by liquid pig manure application after flooding rather than application of liquid pig manure in flooding condition. Therefore, flooding after liquid pig manure application would provide much more nitrogen for rice growth due to the reduction of ammonia emission.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.4
• /
• pp.282-293
• /
• 2008

In order to develop the substitutive materials for natural baits of swimming crab pots, the attracting effects of swimming crab such as the preference of baits which were made of the by-products of marine and stock raising through the water tank experiments and fishing experiments. On the investigation of mean entrapped catch number to the pot by the baits after putting the 4 kinds of baits, mackerel(M), mackerel with grinded mackerel s internals($MM_I$), mackerel with tuna s internals$MM_I$) and makerel with grinded krill(MK) each in one pot by turns, $MM_I$ and MK were entrapped mean 3.9(13.0%) and they were a little more comparing to M, and $MT_I$ is least with mean 2.1(7.0%)(F=12.913, P < 0.05). Otherwise, on the preference investigation of swimming crabs by the baits after putting the 4 kinds of baits in the 4 pots each, M was entrapped mean 3.0(10%), but $MM_I$, $MT_I$ and MK were mean 1.2(4.0%), 1.0(3.3%) and 1.5(5.0%) each and they were only 30-50% of M(F=13.398, P < 0.05). On the preference investigation of swimming crabs by the 5 kinds of baits, mackerel(M), and krill(K), manila clam($M_C$), pig s fat($P_F$) and chicken s head($C_H$) which were used in substitutive baits, M was entrapped mean 3.2(10.7%), but K was about 50% of catch of M with mean 1.6(5.3%), and $M_C$, $P_F$ and $C_H$ were very few with mean 0.1-0.2(0.3-0.7%)(F=89.186, P < 0.05). On the preference investigation of swimming crabs by the pots which were put each the 3 kinds of baits, original krill(K), grinded krill with gluten and soybean oil cake($K_GGS$) and grinded krill with gluten, soybean oil cake and glycine($K_GGSG_L$) in the blue fluorescent hexahedral plastic bait cages(BF), and which were put the mackerel(M) in the non-fluorescent hexahedral red plastic bait cage($RF_N$), it was entrapped mean 3.0(10.0%) in the pot which was put the mackerel in the $RF_N$, and the same level in the pots which were put the K and $K_GGSG_L$ in the BF, but it was mean 2.0(6.7%) in the pots which was put the $K_GGS$ in BF and it was decreased by 30% of catch comparing to $RF_N$(F=3.750, P < 0.05). On the preference investigation of swimming crab by the pots which was put grinded tuna with gluten, soybean oil cake and glycine($T_IGSG_L$) in the blue fluorescent hexahedral plastic bait cage(BF), and which was put mackerel(M) in the nonfluorescent hexahedral red plastic bait cage($RF_N$), it was entrapped mean 3.3(11.0%) in the pot which was put mackerel in $RF_N$, and mean 2.7(9.0%) in the pot which was put $T_IGSG_L$ in BF and it was about 15% less comparing to use bait M(t=1.387, P < 0.05). As a results of fishing experiments, a plan for enhancing catching efficiency of $T_IGSG_L$ will be required because catching efficiency of $T_IGSG_L$, alternative bait, was half of fish catching efficiency of natural bait using mackerel. Fishing experiments were conducted 3 times using reinforced substitutive artificial bait that is reinforced attractive effect of $T_IGSG_L$ and composed of tuna intestine, grinded mackerel, gluten, soybean cake, glycine and alanine($T_IM_GGSG_LA$). Catching efficiency of $T_IM_GGSG_LA$ was about 80% of that of natural bait made of mackerel.

• Communications for Statistical Applications and Methods
• /
• v.3 no.2
• /
• pp.275-282
• /
• 1996

A life distribution F with survival function $\overline{F}$=1-F, finite mean $\mu$ and mean residual life m(t) is said to be NBUE(NWUE) if m(t)$\leq$($\geq$) .$\mu$ for t$\geq$0. This NBUE property can equivalently be characterized by the fact that $\varphi$(u)$\geq$($\leq$)u for 0$\leq$u$\leq$1, where $\varphi$(u) is the scaled total-time-on test transform of F. A generalization of the NBUE properties is that there is a value of p such that $\varphi$(u)\geq.u$ for 0$\leq$u$\leq$p and $\varphi$(u)\leq$$\leq$u$\leq$1, or vice versa. This means that we have a trend change in the NBUE property. In this paper we point out an error of Klefsjo's paper (1988). He erroneously takes advantage of trend change point of failure rate to calculate the empirical test size and power in lognormal distribution. We solves the trend change point of mean residual lifetime and recalculate the empirical test size and power of Klefsjo (1988) in mocensoring case.

• Korean Membrane Journal
• /
• v.7 no.1
• /
• pp.34-41
• /
• 2005

The wastewater discharged from a paper plant was filtrated by 3 kinds of tubular carbon ceramic UF and MF membranes with $N_2$-backflushing. The filtration time (FT) was fixed at 8 min or 16 min, and $N_2$-backflushing time (BT) was changed in 0${\~}$60 sec. The optimal condition was discussed in the viewpoints of total permeate volume ($V_T$), dimensionless permeate flux (J/Jo) and resistance of membrane fouling ($R_f$). In the viewpoints of $V_T$, J/Jo and $R_f$, the optimal $N_2$-BT was 40 sec at both FT for M9 (MWCO: 300,000 Daltons) and C005 ($0.05{\mu}m$) membranes. However, for C010 ($0.1{\mu}m$) it was 10 sec at FT=8 min, and 20 sec at FT=16 min in the viewpoints of J/Jo and $R_f$, and 5 sec at both FT in the viewpoints of $V_T$. It means that the short $N_2$-BT could reduce the membrane fouling and recover the permeate flux sufficiently for MF membrane having a large pore size as C010. Average rejection rates of pollutants were higher than $99.0\%$ for turbidity and $22.8{\~}59.6\%$ for $COD_{cr}$, but rejection rates of total dissolved solid (TDS) were lower than $8.9\%$. Therefore, the low turbidity water purified in our system could be reused for paper process.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.249-252
• /
• 2002

we have studied the characteristics of PHEMT's with gate recess etching method. The DC characterization of PHTMT fabricated with the wide single recess methods is a maximum drain current density of 319.4 ㎃/mm and a peak transconductance of 336.7 ㎳/mm. The RF measurements were obtained in the frequency range of 1~50GHz. At 50GHz, 3.69dB of 521 gain were obtained and a current gain cut-off frequency(f$_{T}$) of 113 CH and a maximum frequency of oscillation(f$_{max}$) of 172 Ghz were achieved from this device. On the other hand, a maximum drain current of 367 mA/mm, a peak transconduclancc of 504.6 mS/mm, S$_{21}$ gain of 2.94 dB, a current gain cut-off frequency(f$_{T}$) of 101 CH and a maximum frequency of oscillation(f$_{max}$) of 113 fa were achieved from the PHEMT's fabricated by the .narrow single recess methods.methods.

• Journal of Korean Society for Atmospheric Environment
• /
• v.2 no.3
• /
• pp.27-33
• /
• 1986

Atmospheric particulate matter (A. P. M.) was collected and size-fractionated by an Andersen high-volume air sampler over 15 month period from Jan. 1985 to Feb. 1986 in Seoul. The concentration of chloride, nitrate and sulfate were extracted in an ultrasonic bath and were analyzed by ion chromatography. The annual arithmetical mean of A. P. M. was 128.54 $\mug/m^3$. The concentration of anions were 2.88 $\mug/m^3$ for chloride, 3.86$\mug/m^3$ for nitrate, and 25.44$\mug/m^3$ for sulfate. The content of A. P. M. was lowest in the particle size range 1.1 $\sim 3.3\mum$ and increased as the particle size increased or decreased. And the anions exhibited a seasonal variation in the isize distribution. The contents of anions were higher in winter than summer. Ther ratio of fine particles to the total particles defined by F/T for chloride, nitrate and sulfate. The F\ulcornerT of these anion generally decrease with increasing air temperature. This tendency was prevalent in the chloride and nitrate.

• Journal of radiological science and technology
• /
• v.40 no.1
• /
• pp.19-25
• /
• 2017

The aim of this study was to evaluate Magnetic Resonance Imaging safety by measuring the translational attraction, torque and susceptibility artifact for Bone-Anchored Hearing Aid (BAHA) implant at 1.5 T and 3.0 T MRI by standard criteria. In vitro assessment tools were made of acrylic-resin by American Society for Testing and Materials (ASTM) F2052-06 and F2119-07 standard. Translational attraction of BAHA implant was measured by the maximum deflection angle at 96 cm position, where the magnetically induced deflection was the greatest. The torque was assessed by the qualitative criteria of evaluating the alignment and rotation pattern, when the BAHA implant was positioned on a line with $45^{\circ}$ intervals inside the circular container in the center of the bore. The susceptibility artifact images were obtained using the hanged test tool, which was filled with $CuSO_4$ solution. And then the artifact size was measured using Susceptibility A rtifact Measurement (SA M) software. In results, the translational attraction was 0 mm at both 1.5 T and 3.0 T and the torque was 0(no torque) at 1.5 T, and +1(mild torque) at 3.0 T. The size of susceptibility artifacts was between 13.20 mm and 38.91 mm. Therefore, The BAHA implant was safe for the patient in clinical MR environment.

• Journal of the Korean Magnetics Society
• /
• v.14 no.5
• /
• pp.169-173
• /
• 2004

We have synthesized monodispersed $\alpha$-F $e_2$ $O_3$ nano particles to investigate the spin change during the Morin transition temperature( $T_{M}$). The particle size was founded to have a very uniform distribution of 80 nm by x-ray diffraction and size dispersion analyzer. The Mossbauer spectra between the 4.2 K and the room temperature show that $T_{M}$ was shifted and the spin states of Fe ion were changed with the particle size. The Morin transition temperature of bulk usually quoted in literature is 265 K but, it decreases with the size and no transition was found at the critical size down to 4.2K. The spin direction of 80 nm sized particles are normal to the hexagonal c-axis above the $T_{M}$ and are tilted about 28～29$^{\circ}$ below $T_{M}$, which is the [110] direction of rombohedral structure.

• Communications of the Korean Mathematical Society
• /
• v.9 no.3
• /
• pp.753-765
• /
• 1994

The linearly constrained quadratic programming(QP) considered is : $$ min f(x) = c^T x + \frac{1}{2}x^T Hx $$ $$ (1) subject to A^T x \geq b,$$ where $c,x \in R^n, b \in R^m, H \in R^{n \times n)}$, symmetric, and $A \in R^{n \times n}$. If there are bounds on x, these are included in the matrix $A^T$. The Hessian matrix H may be positive definite or negative semi-difinite. For large problems H and the constraint matrix A are assumed to be sparse.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.19-24
• /
• 2004

In this paper, we have demonstrated the fabrication of a 70 nm foot print of the T-gate by using a positive resist ZEP520/P(MMA-MAA)/PMMA trilayer by double exposure method without a thin dielectric supporting layer on the substrate. The device performance was characterized by DC and RF measurement. The fabricated 70 nm InGaAs/InAlAs MHEMTS with 70 ${\mu}{\textrm}{m}$ unit gate width and 2 fingers showed good DC and RF characteristics of Idss, max =228.6 mA/mm, gm =645 mS/mm, and fT =255 GHz, respectively.