• Horticultural Science & Technology
• /
• v.29 no.2
• /
• pp.135-143
• /
• 2011

In the Doritaenopsis hybrid, like most of the orchid species and hybrids, temperature is crucial for the vegetative-to-reproductive transition, and low temperature is required for bud differentiation. To understand the molecular mechanism of this process, an orchid GIGANTEA (GI) gene, DhGI1, was isolated and characterized by using the rapid amplification of cDNA ends (RACE) PCR technique. Sequence analysis showed that the full-length cDNA is 4,022 bp with a major open reading frame of 3,483 bp, and the amino acid sequence showed high similarity to GI proteins in Zea mays, Oryza sativa, Arabidopsis thaliana and other plants. Semi-quantitative RT-PCR revealed that DhGI1 was expressed throughout development and could be detected in roots, stems, leaves, peduncles and flower buds. The expression level of DhGI1 was higher when the plants were flowering at low temperature (22/$18^{\circ}C$ day/night) than the other growth stages. Further analysis indicated that the accumulation of DhGI1 transcripts was significantly increased at low temperature, and concomitantly, initiation of the peduncle was observed. However, DhGI1 levels were low under high temperature (30/$25^{\circ}C$) conditions, and flower initiation was inhibited. These results indicate that the expression of DhGI1 is regulated by low temperature and that DhGI1 may play an important role in inflorescence initiation in this Doritaenopsis hybrid at low temperatures.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.137-140
• /
• 2003

Cu+ ions drift diffusion in different dielectric materials is evaluated. The diffusion is investigated by measuring shift in the flatband voltage of capacitance/voltage measurements on Cu gate capacitors after bias temperature stressing. At a field of 1.lMV/cm and temperature $200^{\circ}C$, $250^{\circ}C$, $300^{\circ}C$ for 1H, 2H, 5H. The Cu+ ions drift rate of polyimide$(2.8{\leq}k{\leq}3.2)$ is considerably lower than thermal oxide. Also Cu+ drift rate of polyimide is similar to PECVD oxide. But, polyimide film is even more resistant to Cu drift diffusion and thermal effect than Thermal oxide, PECVD oxide: This results got a comparative reference. The important conclusion is that polyimide film is strongly dielectric material by thermal effect and Cu drift diffusion.

• The Korean Journal of Community Living Science
• /
• v.18 no.2
• /
• pp.247-263
• /
• 2007

This study was complied to analyze the professional agricultural techniques level and to suggest a desirable direction for the professional education system for women farmer. The research was conducted by using in-field surveys and interviews. Data was gathered by questionnaire from 147 women farmer in five specialized crop regions: strawberry, cucumber, rose, apple, and oyster mushroom. The results obtained are as follows. First, the technique levels in computer usage and electronic commerce, machinery usage, pesticide and fertilizer utilization, facility automation, and eco-agricultural cultivation were low. Second, the demand for professional education, evaluated through technique level by standard management diagnosis, was recognized. Areas of concern included: cucumber (temperature control, carbonic acid gas control, grading, funds management), strawberry (light control, soil temperature control, irrigation watering, shipping), rose (temperature control, light control, funds management, cooperated management), oyster mushroom (growth cabinet sterilizer), and apple (flower bud pinching, defloration, fruit thinning, funds management). Based on the results of this study, the following are suggestions for the planning of a professional education system for women farmer. First, it needs to address formal education in marketing, machinery usage, facilities automation, and techniques in pesticide and fertilizer utilization. Second, it needs to be a multi- level program with appropriate terminology at every level which is suitable to each age and ability of women farmer. Third, it needs a more comprehensive manual developed by need analysis of women farmer and a larger lecturer pool for professional education.

• Journal of the Korean Society of Combustion
• /
• v.6 no.1
• /
• pp.20-28
• /
• 2001

Self flue gas recirculation flow is an effective method for low NOx emission in a regenerative low NOx burner. The object of this study is to analyze self flue gas recirculating flow by varying the jet velocity of the combustion air. Fuel and air flow rates are fixed and combustion air jet nozzle diameters are 13, 6.5 and 5mm. The stoichiometric line is obtained from the concentration of fuel using the acetone PLIF technique. It is found that self flue gas recirculating flow is entrained into that line using the two color PIV technique. As the jet velocity of combustion air is increased, the flue gas entrainment rate into the stoichiometric line is increased. This result suggests that NOx emission can be reduced due to the effects of flue gas lowering the flame temperature.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.1
• /
• pp.1-12
• /
• 2010

Recently, processor performance has been improved dramatically. Unfortunately, as the process technology scales down, energy consumption in a processor increases significantly whereas the processor performance continues to improve. Moreover, peak temperature in the processor increases dramatically due to the increased power density, resulting in serious thermal problem. For this reason, performance, energy consumption and thermal problem should be considered together when designing up-to-date processors. This paper proposes three modified filter cache schemes to alleviate the thermal problem in the filter cache, which is one of the most energy-efficient design techniques in the hierarchical memory systems : Bypass Filter Cache (BFC), Duplicated Filter Cache (DFC) and Partitioned Filter Cache (PFC). BFC scheme enables the direct access to the L1 cache when the temperature on the filter cache exceeds the threshold, leading to reduced temperature on the filter cache. DFC scheme lowers temperature on the filter cache by appending an additional filter cache to the existing filter cache. The filter cache for PFC scheme is composed of two half-size filter caches to lower the temperature on the filter cache by reducing the access frequency. According to our simulations using Wattch and Hotspot, the proposed partitioned filter cache shows the lowest peak temperature on the filter cache, leading to higher reliability in the processor.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.5
• /
• pp.262-264
• /
• 2014

Pristine ZnO, 3 wt.% Ga-doped (3GZO) and 3 wt.% Ag-doped (3SZO) ZnO nanowires (NWs) were grown using the hot-walled pulse laser deposition (HW-PLD) technique. The doping of Ga and Ag in ZnO NWs was observed by analyzing the optical and chemical properties. We optimized the synthesis conditions, including processing temperature, time, gas flow, and distance between target and substrate for the growth of pristine and doped ZnO NWs. The diameter and length of pristine and doped ZnO NWs were controlled under 200 nm and several ${\mu}m$, respectively. Low temperature photoluminescence (PL) was performed to observe the optical property of doped NWs. We clearly observed the shift of the near band edge (NBE) emission by using low temperature PL. In the case of 3GZO and 3SZO NWs, the center photon energy of the NBE emissions shifted to low energy direction using the Burstein Moss effect. A strong donor-bound exciton peak was found in 3 GZO NWs, while an acceptor-bound exciton peak was found in 3SZO NWs. X-ray photoelectron spectroscopy (XPS) also indicated that the shift of binding energy was mainly attributed to the interaction between the metal ion and ZnO NWs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1991.10a
• /
• pp.52-55
• /
• 1991

A fuel cell is a device that directly converts the chemical energy of reatants into low voltage d$.$c electricity. The high temperature fuel cell (MCFC, SOFC)is an excellent electric generator with regard to preservation of the environment and the energy-savings. The purpose of this research is to investigate technical issue and research need for practical use of high temperature fuel cell.

• Korean Journal of Materials Research
• /
• v.29 no.12
• /
• pp.753-756
• /
• 2019

Orthorhombic dysprosium manganite DyMnO₃ with single phase is synthesized using solid-state reaction technique and the crystal structure and dielectric properties as functions of temperature and frequency are investigated. Thermally activated dielectric relaxations are shown in the temperature dependence of the complex permittivity, and the respective peaks are found to be shifted to higher temperatures as the measuring frequency increases. In Arrhenius plots, activation energies of 0.32 and 0.24 eV for the high- and low-temperature relaxations are observed, respectively. Analysis of the relationship between the real and imaginary parts of the permittivity and the frequencies allows us to explain the dielectric behavior of DyMnO₃ ceramics by the universal dielectric response model. A separation of the intrinsic grain and grain boundary properties is achieved using an equivalent circuit model. The dielectric responses of this circuit are discerned by impedance spectroscopy study. The determined grain and grain boundary effects in the orthorhombic DyMnO₃ ceramics are responsible for the observed high- and low-temperature relaxations in the dielectric properties.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.356-356
• /
• 2007

Plasma immersion ion beam deposition (PIIBD) technique is a cost-effective process for the deposition of diamond like carbon thin film, the possible solid lubricant on large surface and a complex shape. We used PIIB process for the preparation of DLC thin film on $Al_2O_3$ with deposition conditions of deposition temperature range $200^{\circ}C$, working gas pressure of 1.310-1Pa. DLC thin films were coated by $C_2H_2$ ion beam deposition on $Al_2O_3$ after the ion bombardment of SiH4 as the bonding layer. Energetic bombardment of $C_2H_2$ ions during the DLC deposition to ceramic materials generated mixed layers at the DLC-Si interface which enhanced the interface to be highly bonded. Wear test showed that the low coefficient of friction of around 0.05 with normal load 2.9N and proved the advantage of the low energy ion bombardment in PIIBD process which improved the tribological properties of DLC thin film coated alumina ceramic. Furthermore, PIIBD was recognized as a useful surface modification technique for the deposition of DLC thin film on the irregular shape components, such as molds, and for the improvement of wear and adhesion problems of the DLC thin film, high temperature solid lubricant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.1054-1056
• /
• 2002

High temperature Kermal diffusion from $POCl_3$ source usually used for conventional process through put of a cell manufacturing line and potentially reduce cell efficiency through bulk like time degradation. To fabricate high efficiency solar cells with minimal thermal processing, spin-on-doping(SOD) technique can be employed to emitter diffusion of a silicon solar cell. A technique is presented to emitter doping of a mono-crystalline solar cell using spin-on doping (SOD). Moreover it is shown that the sheet resistance variation with RTA temperature and time fer mono-crystalline and multi-crystalline silicon samples. This novel SOD technique was successfully used to produces 11.3% efficiency l04mm by 104mm size mono-crystalline silicon solar cells.