• 센서학회지
• /
• 제27권6호
• /
• pp.362-367
• /
• 2018

A complementary metal oxide semiconductor (CMOS) binary image sensor is proposed for low-power and low-noise operation. The proposed binary image sensor has the advantages of reduced power consumption and fixed pattern noise (FPN). A gate/body-tied (GBT) p-channel metal-oxide-semiconductor field-effect transistor (PMOSFET)-type photodetector is used as the proposed CMOS binary image sensor. The GBT PMOSFET-type photodetector has a floating gate that amplifies the photocurrent generated by incident light. Therefore, the sensitivity of the GBT PMOSFET-type photodetector is higher than that of other photodetectors. The proposed CMOS binary image sensor consists of a pixel array with $394(H){\times}250(V)$ pixels, scanners, bias circuits, and column parallel readout circuits for binary image processing. The proposed CMOS binary image sensor was analyzed by simulation. Using the dynamic comparator, a power consumption reduction of approximately 99.7% was achieved, and this performance was verified by the simulation by comparing the results with those of a two-stage comparator. Also, it was confirmed using simulation that the FPN of the proposed CMOS binary image sensor was successfully reduced by use of the double sampling process.

• 센서학회지
• /
• 제30권2호
• /
• pp.82-87
• /
• 2021

In this paper, we propose a high-speed, low-power complementary metal-oxide semiconductor (CMOS) binary image sensor featuring a gate/body-tied (GBT) p-channel metal-oxide-semiconductor field-effect transistor (PMOSFET)-type photodetector based on a double-tail comparator. The GBT photodetector forms a structure in which the floating gate (n+ polysilicon) and body of the PMOSFET are tied, and amplifies the photocurrent generated by incident light. The double-tail comparator compares the output signal of a pixel against a reference voltage and returns a binary signal, and it exhibits improved power consumption and processing speed compared with those of a conventional two-stage comparator. The proposed sensor has the advantages of a high signal processing speed and low power consumption. The proposed CMOS binary image sensor was designed and fabricated using a standard 0.18 ㎛ CMOS process.

• 센서학회지
• /
• 제23권2호
• /
• pp.87-93
• /
• 2014

In this paper, we propose a block-based low-power complementary metal oxide semiconductor (CMOS) image sensor (CIS) with a simple pixel structure for power efficiency. This method, which uses an additional computation circuit, makes it possible to reduce the power consumption of the pixel array. In addition, the computation circuit for a block-based CIS is very flexible for various types of pixel structures. The proposed CIS was designed and fabricated using a standard CMOS 0.18 ${\mu}m$ process, and the performance of the fabricated chip was evaluated. From a resultant image, the proposed block-based CIS can calculate a differing contrast in the block and control the operating voltage of the unit blocks. Finally, we confirmed that the power consumption in the proposed CIS with a simple pixel structure can be reduced.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.725-728
• /
• 1988

Image restoration technique using dual sensor is presented in this paper. Digital Radiography image (1024xlO24) is obtained by conventional resolution sensor. We also obtain local DR image data by high resolution sensor. Two dimensional maximum entropy power spectrum estimation (2-D ME PSE) is applied to low resolution image and high resolution image for the purpose of the power spectrum estimation of each image. A class of linear algebraic restoration filter, parametric projection filter (PPF), is derived from the power spectrums of each image. It is shown that the noise energy may be considerably reduced through the PPF.

• 센서학회지
• /
• 제29권2호
• /
• pp.82-88
• /
• 2020

In this paper, we propose a complementary metal-oxide semiconductor (CMOS) binary image sensor with a gate/body-tied (GBT) p-channel metal-oxide-semiconductor field-effect transistor (PMOSFET)-type photodetector using a double-tail comparator for high-speed and low-power operations. The GBT photodetector is based on a PMOSFET tied with a floating gate (n+ polysilicon) and a body that amplifies the photocurrent generated by incident light. A double-tail comparator compares an input signal with a reference voltage and returns the output signal as either 0 or 1. The signal processing speed and power consumption of a double-tail comparator are superior over those of conventional comparator. Further, the use of a double-sampling circuit reduces the standard deviation of the output voltages. Therefore, the proposed CMOS binary image sensor using a double-tail comparator might have advantages, such as low power consumption and high signal processing speed. The proposed CMOS binary image sensor is designed and simulated using the standard 0.18 ㎛ CMOS process.

• 센서학회지
• /
• 제30권4호
• /
• pp.223-228
• /
• 2021

This work presents a low-power CMOS image sensor (CIS) with a multi-column-parallel (MCP) readout structure while focusing on improving its performance compared to previous works. A delta readout scheme that utilizes the image characteristics is optimized for the MCP readout structure. By simply alternating the MCP readout direction for each row selection, additional memory for the row-to-row delta readout is not required, resulting in a reduced area of occupation compared to the previous work. In addition, the bias current of a pre-amplifier in a successive approximate register (SAR) analog-to-digital converter (ADC) changes according to the operating period to improve the power efficiency. The prototype CIS chip was fabricated using a 0.18-㎛ CMOS process. A 160 × 120 pixel array with 4.4 ㎛ pitch was implemented with a 10-bit SAR ADC. The prototype CIS demonstrated a frame rate of 120 fps with a total power consumption of 1.92 mW.

• 마이크로전자및패키징학회지
• /
• 제27권2호
• /
• pp.1-10
• /
• 2020

The technology and market size of image sensors continue to develop thanks to the release of image sensors that exceed 100 million pixels in 2019 and expansion of black box camera markets for vehicles in addition to existing mobile applications. We review the technology flow of image sensors that have been constantly evolving for 40 years since Hitachi launched a 200,000-pixel image sensor in 1979. Although CCD has made inroads into image sensor market for a while based on good picture quality, CMOS image sensor (CIS) with active pixels has made inroads into the market as semiconductor technology continues to develop, since the electrons generated by the incident light are converted to the electric signals in the pixel, and the power consumption is low. CIS image sensors with superior characteristics such as high resolution, high sensitivity, low power consumption, low noise and vivid color continue to be released as the new technologies are incorporated. At present, new types of structures such as Backside Illumination and Isolation Cell have been adopted, with better sensitivity and high S/N ratio. In the future, new photoconductive materials are expected to be adopted as a light absorption part in place of the pn junction.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권4호
• /
• pp.388-396
• /
• 2012

In this paper, a $320{\times}240$ pixel, 80 frame/s CMOS image sensor with a low power dual correlated double sampling (CDS) scheme is presented. A novel 8-bit hold-and-go counter in each column is proposed to obtain 10-bit resolution. Furthermore, dual CDS and a configurable counter scheme are also discussed to realize efficient power reduction. With these techniques, the digital counter consumes at least 43% and at most 61% less power compared with the column-counters type, and the frame rate is approximately 40% faster than the double memory type due to a partial pipeline structure without additional memories. The prototype sensor was fabricated in a Samsung $0.13{\mu}m$ 1P4M CMOS process and used a 4T APS with a pixel pitch of $2.25{\mu}m$. The measured column fixed pattern noise (FPN) is 0.10 LSB.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.631-634
• /
• 2009

최근 무선통신, MEMS 소자, 센서 및 베터리 분야의 발전은 저가, 저전력 다기능 소형 센서 노드를 가능하게 한다. 다수의 소형 센서 노드는 무선 통신을 통해 센서 네트워크를 형성한다. 센서 네트워크는 전통적인 센서를 통해 중요한 개선을 나타내며 지그비 무선 이미지 전송에 대한 연구는 산업과 과학 분야에서 주요 연구 테마가 되고 있다. 본 논문에서는 지그비 무선 이미지 센서 노드와 멀티미디어 모니터링 서버 시스템을 디자인하였다. 구현된 시스템은 임베디드 프로세서, CMOS 이미지 센서, 이미지 획득 및 처리부, 지그비 RF 모듈, 전력공급 및 원격 모니터링 서버 시스템으로 구성된다. 앞으로 지그비 무선 이미지 센서 노드 및 모니터링 서버 시스템의 성능을 개선하고 에너지 효율적인 지그비 무선 이미지 전송 프로토콜과 모바일 네트워크와의 연동에 대한 연구를 진행할 예정이다.

• 대한전자공학회논문지SD
• /
• 제48권2호
• /
• pp.20-27
• /
• 2011

모바일 기기에 장착되는 CMOS 이미지 센서(CIS) 칩은 배터리 용량의 한계로 인해 저전력 소모를 요구한다. 본 논문에서는 전력소모를 줄일 수 있는 데이터 플립플롭 회로와 새로운 저전력 구조의 Single-Slope A/D Converter(SS-ADC)를 사용한 이미지 센서를 설계하여 모바일 기기에 사용되는 CIS 칩의 전력 소모를 감소시켰다. 제안하는 CIS는 $2.25um{\times}2.25um$ 면적을 갖는 4-Tr Active Pixel Sensor 구조를 사용하여 QVGA($320{\times}240$)급 해상도를 갖도록 설계되었으며 0.13um CMOS 공정에서 설계되었다. 실험 결과, CIS 칩 내부의 SS-ADC 는 10-b 해상도를 가지며, 동작속도는 16 frame/s 를 만족하였고, 전원 전압 3.3V(아날로그)/1.8V(Digital)에서 25mW의 전력 소모를 보였다. 측정결과로부터 제안된 CIS 칩은 기존 CIS 칩에 비해 대기시간동안 약 22%, 동작시간동안 약 20%의 전력이 감소되었다.