• 제목/요약/키워드: Low-frequency Range

검색결과 1,816건 처리시간 0.033초

열 열화한 열전도성 실리콘 고무의 전기특성 (Electric Properties of Thermal Conductive Silicone Rubber due to Thermally Degradation)

  • 이성일
    • 한국전기전자재료학회논문지
    • /
    • 제29권12호
    • /
    • pp.835-840
    • /
    • 2016
  • In this study, the electrostatic capacity and dielectric loss tangent for $20{\mu}m$ thick thermal conductivity silicone rubber which is heated at 80 degrees for 8 hours has been measured at temperature of $30^{\circ}C{\sim}170^{\circ}C$, frequency of 0.1~1 MHz. The results of degradation evaluation by this study are as follows. In low frequency, it found that the electrostatic capacity decreased with increasing temperature. On the other hand, it confirmed that the range of the electrostatic capacity narrowed with increasing frequency. It confirmed that there are the carboxylic acid structure and C-O bonding at range of wave number 1,000cm-1 to 1,300cm-1.

전력계통의 저주파 진동 억제를 위한 강인하 QFT 제어기 설계 (Design of Robust QFT Controller to Damp Low Frequency Oscillations of Power System)

  • 정형환;이정필;김상효;정문규;안병철
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제25권4호
    • /
    • pp.833-845
    • /
    • 2001
  • Quantitative Feedback Theory(QFT) has been used to design a robust power system stabilizer(PSS) to improve transient and dynamic stabilities of a power system. This design technique is basically accomplished in frequency domain. The most important feature of QFT is that it is able to deal with the design problem of complicated uncertain plants. A basic idea in QFT design is the translation of closed-loop frequency-domain specifications into Nichols chart domains specifying the allowable range of the nominal open-loop response and then to design a controller by using the gain-phase loop shaping technique. This paper introduces a new algorithm to compute QFT bounds more efficiently. The propose QFT design method ensures a satisfactory performance of the PSS under a wide range of power system operating conditions.

  • PDF

FMCW 레이더 센서 기반의 강의용 광역 마이크 시스템 (Widerange Microphone System for Lecture using FMCW Radar Sensor)

  • Oh, Woojin
    • 한국정보통신학회논문지
    • /
    • 제25권4호
    • /
    • pp.611-614
    • /
    • 2021
  • In this paper, we propose a widerange array microphone for lecturer tracked with Frequency Modulated Continuous Waveform (FMCW) radar sensor. Time Difference-of-Arrival (TDoA) is often used as audio tracking, but the tracking accuracy is poor because the frequency of the voice is low and the relative frequency change is large. FMCW radar has a simple structure and is used to detect obstacles for vehicles, and the resolution can be archived to several centimeter. It is shown that the sensor is useful for detecting a speaker in open area such as a lecture, and we propose an wide range 4-element array microphone beamforming system. Through some experiments, the proposed system is able to adequately track the location and showed a 8.6dB improvement over the selection of the best microphone.

Optimized Phase Noise of LC VCO Using an Asymmetrical Inductance Tank

  • Yoon Jae-Ho;Shrestha Bhanu;Koh Ah-Rah;Kennedy Gary P.;Kim Nam-Young
    • Journal of electromagnetic engineering and science
    • /
    • 제6권1호
    • /
    • pp.30-35
    • /
    • 2006
  • This paper describes fully integrated low phase noise MMIC voltage controlled oscillators(VCOs). The Asymmetrical Inductance Tank VCO(AIT-VCO), which optimize the shortcoming of the previous tank's inductance optimization approach, has lower phase noise performance due to achieving higher equivalent parallel resistance and Q value of the tank. This VCO features an output power signal in the range of - 11.53 dBm and a tuning range of 261 MHz or 15.2 % of its operating frequency. This VCO exhibits a phase noise of - 117.3 dBc/Hz at a frequency offset of 100 kHz from carrier. A phase noise reduction of 15 dB was achieved relative to only one spiral inductor. The AIT-VCO achieved low very low figure of merit of -184.6 dBc/Hz. The die area, including buffers and bond pads, is $0.9{\times}0.9mm^2$.

Local Flow Speed Measurement Using Tunable AC Thermal Anemometry

  • Chung Won Seok;Kwon Ohmyoung;Lee Joon Sik;Choi Young Ki;Park Seungho
    • Journal of Mechanical Science and Technology
    • /
    • 제19권7호
    • /
    • pp.1449-1459
    • /
    • 2005
  • This paper shows the results of local flow speed measurement using tunable AC thermal anemometry, which is suitable for the accurate measurement of wide range flow speed. The measurement accuracy is verified through the comparison between the measurement data and the analytic solution of the sensor temperature oscillation in stationary fluid. The relation between the phase lag and the flow speed is experimentally investigated at various conditions. The measurement sensitivity for low flow speed improves in a low frequency region and that for high flow speed improves in a high frequency region. Also, the sensitivity increases with decreasing thermal conductivity of the surrounding fluid. The local flow speed could be measured as low as 1.5 mm/s and the highest measurement resolution was 0.05 mm/s in the range of 4.5 $\~$5.0 mm/s at 1 Hz in this experiment.

효율적 버퍼 주파수 보상을 통한 LDO 선형 레귤레이터 (LDO Linear Regulator Using Efficient Buffer Frequency Compensation)

  • 최정수;장기창;최중호
    • 대한전자공학회논문지SD
    • /
    • 제48권11호
    • /
    • pp.34-40
    • /
    • 2011
  • 본 논문은 낮은 출력 저항을 버퍼를 사용하여 주파수 보상을 수행한 LDO 선형 레귤레이터에 관한 것이다. 주파수 보상을 위해 제안하는 버퍼는 두 개의 shunt 피드백 루프를 사용하여 출력 저항을 최소화함으로써 이를 통해 LDO 선형 레귤레이터 전체의 부하 및 입력 전압에 따른 레귤레이션 성능을 개선할 수 있고 저전압에서도 낮은 출력 저항을 유지함으로 휴대기기 응용에 있어서도 적합하다. 또한 외부 디지털 제어를 통한 LDO 선형 레귤레이터의 출력 전압을 가변함으로써 외부 MCU와의 인터페이스를 개선하기 위한 기준 전압 제어 기법을 나타내었다. 구현된 LDO 선형 레귤레이터는 2.5V~4.5V의 입력 전압에 대하여 동작하며 최대 300mA의 부하 전류를 0.6~3.3V의 출력 전압에 대하여 제공할 수 있다.

선형 캐스코드 전류모드 적분기 (Linear cascode current-mode integrator)

  • 김병욱;김대익
    • 한국전자통신학회논문지
    • /
    • 제8권10호
    • /
    • pp.1477-1483
    • /
    • 2013
  • 연속시간 전류모드 기저대역 채널선택 필터 설계를 위하여 전류이득과 단위이득 주파수를 개선시킨 저전압 선형 캐스코드 전류모드 적분기를 제안하였다. 제안된 전류모드 적분기는 CMOS 상보형 회로로 구성된 완전 차동 형태의 입 출력단으로 구성하였으며, 여기에 캐스코드 트랜지스터를 추가시킴으로써 바이어스 단을 구성하여 선형영역에서 동작시켜 저전압 구조에 적합하도록 설계하였다. 이 때 바이어스 전압을 선택적으로 제어하여 주파수 대역이 가변될 수 있도록 설계하였다. 시뮬레이션 결과를 통해 설계한 선형 캐스코드 전류모드 적분기가 저전압 동작, 전류 이득 및 단위이득 주파수 등 모두 만족할 만한 특성을 가지고 있음을 확인하였다.

Analysis of the oxidized low density lipoprotein receptor 1 gene as a potential marker for carcass quality traits in Qinchuan cattle

  • Gui, Lin-sheng;Raza, Sayed Haidar Abbas;Jia, Jianlei
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제32권1호
    • /
    • pp.58-62
    • /
    • 2019
  • Objective: The oxidized low density lipoprotein receptor 1 (OLR1) gene plays an important role in the degradation of oxidized low-density lipoprotein and adipocyte proliferation in mammals. For this reason, we aimed at investigating the association of OLR1 gene polymorphisms with carcass quality traits in Chinese Qinchuan cattle. Methods: The single nucleotide polymorphism (SNP) was identified in the 3' untranslated region of bovine OLR1 gene by DNA sequencing. In addition, the haplotype frequency and linkage disequilibrium estimates of three SNPs were evaluated in 520 individuals. Results: Results indicated that the studied three SNPs were within the range of moderate genetic diversity (0.25< polymorphism information content<0.5). Haplotype analysis of three SNPs showed that ten different haplotypes were identified, but only five haplotypes were listed as those with a frequency of <0.05 were excluded. The Hap3 ($-G_1T_2C_3-$) had the highest haplotype frequency (42.10%). Linkage disequilibrium analysis showed that the three SNPs had a low linkage ($r^2<0.001$). The T10588C and C10647T were significantly associated with backfat thickness and intramuscular fat content in Qinchuan cattle. Conclusion: Based on our results, we believe that the OLR1 gene could be a strong candidate gene for influencing carcass quality traits in Qinchuan cattle.

심매설 접지전극에 대한 접지임피던스의 주파수특성 (Frequency Characteristics of Grounding Impedances of the Deeply-driven Ground Rods)

  • 강성만;김태기;김한수;이복희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 제39회 하계학술대회
    • /
    • pp.1348-1349
    • /
    • 2008
  • Grounding impedance depends on the frequency of current flowing into a grounding system. Especially, the lightning gives a broad frequency spectrum from low frequency up to 1 MHz. So the grounding impedance related to high frequency current like lightning should be measured with high frequency source. In this paper, we described the grounding impedances of deeply-driven ground rods of 10 $\sim$ 48 m long with respect to the frequency of injected currents. For the experiments, we used the wideband power amplifier which can produce sinusoidal voltages with the frequency ranges of DC $\sim$ 250 MHz. As a result, the longer the ground rod is, the lower the ground resistance is. However the grounding impedance of deeply-driven ground rod in the range of higher frequency is significantly increased. As a consequence, it is important to evaluate the high frequency performance of grounding systems for lightning protection.

  • PDF

심매설 접지전극의 접지임피던스의 주파수의존성 (Frequency Dependence of Grounding Impedances of the Deeply-driven Ground Rods)

  • 김태기;강성만;이복희
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2008년도 춘계학술대회 논문집
    • /
    • pp.70-73
    • /
    • 2008
  • Grounding impedance depends on the frequency of current flowing into a grounding system. Especially, the lightning gives a broad frequency spectrum from low frequency up to 1 MHz. So the grounding impedance related to high frequency current like lightning should be measured with high frequency source. In this paper, we described the grounding impedances of deeply-driven ground rods of 10 ${\sim}$ 48 m long with respect to the frequency of injected currents and the feed point. For the experiments, we used the wideband power amplifier which can produce sinusoidal voltages with the frequency ranges of DC ${\sim}$ 250 MHz. As a result, the longer the ground rod is, the lower the ground resistance is. However the grounding impedance of deeply-driven ground rod in the range of higher frequency is significantly increased. As a consequence, it is important to evaluate the high frequency performance of grounding systems for lightning protection.

  • PDF