• 한국산업정보학회논문지
• /
• 제20권1호
• /
• pp.49-55
• /
• 2015

This paper proposes a 2.4 GHz RF oscillator with a very low close-in phase noise performance. This is composed of a low frequency crystal oscillator and three frequency multipliers such as two doubler (X2) and one tripler (X3). The proposed oscillator is implemented as a hybrid type circuit design using a discrete silicon bipolar transistor. The measurement results of the proposed oscillator structure show -115 dBc/Hz close-in phase noise at 10 kHz offset frequency, while only dissipating 5 mW from a 1-V supply. Its close-in phase noise level is very close to that of a low frequency crystal oscillator with little degradation of noise performance. The proposed structure which is consisted of a low frequency crystal oscillator and a frequency multiplier provides new method to implement a low power low close-in phase noise RF local oscillator.

• 전력전자학회논문지
• /
• 제27권1호
• /
• pp.1-8
• /
• 2022

Recently, photovoltaic (PV) systems have been gradually applied in eco-friendly vehicle applications to improve fuel economy. The relevant market is expected to continue to grow because the installation of large-capacity PV systems to other eco-friendly vehicles, such as electric buses and trains, is being considered. However, in a PV system, power imbalance between submodules and low power generation efficiency occur due to factors such as cell aging, contamination, and shading. To resolve this problem, various differential power processing (DPP) converters have been researched and developed. However, conventional DPP converters suffer from large volume and low efficiency. Therefore, to apply DPP converters to eco-friendly vehicles, increasing efficiency and reducing volume and price compared with existing DPP converters is necessary. In this paper, a novel DPP converter with an integrated transformer is proposed and analyzed. The proposed DPP converter uses a single magnetic component by integrating transformers and secondary sides of conventional DPP converters. Therefore, the proposed DPP converter shows high power density and high efficiency, and it is suitable for PV systems in eco-friendly vehicle applications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.163-165
• /
• 2003

Over the past several years, the application extent of the real-time systems is being expanded with the progress of civilization. An effort to minimize power consumption at the system is being accomplished in several fields from the design of an analog/digital circuit up to the device level Things of this effort have included the power optimum-technique to minimize power consumption at the digital logic circuit and the dynamic managed skill by means o( the decision of the operating system. In this paper, we designed of low power system by using Power-optimized method. As an effective low-power design, we designed the low power system which it has a monitoring system within the main board and a personal computer.

• 전기학회논문지P
• /
• 제62권3호
• /
• pp.145-150
• /
• 2013

A novel AC to DC PWM converters with unity input power factor are proposed to overcome the above shortcoming. The main function of these converters is to shape the input line current to force it exactly in phase with the input AC voltage. Therefore, the input power factor can be improved to near unity and the input current harmonics can be eliminated. In this paper, half-bridge converter with two active switches and two diodes are utilized for low-cost type UPS configuration. By having only two semiconductors in the current path at any time, losses can be reduced over the conventional boost topology. Also, this converter provides controllable dc-link voltage, high power factor, and low cost type converter by simple power circuits. Simulation results show that the proposed half-bridge converter/inverter control technique can be applied to single-phase low-cost type UPS systems successfully.

• 한국산업정보학회논문지
• /
• 제19권1호
• /
• pp.61-67
• /
• 2014

센서 시스템과 같은 저전력 설계를 요구하는 시스템에서 기존의 동기방식의 회로는 낮은 전압에서 지연(delay)이 급격히 증가하여 시스템의 전체 성능을 유지할 수 없을 뿐만 아니라, 공정, 전압, 온도 변이 (PVT variation), 노화 등에 크게 영향을 받아서 올바른 동작을 기대할 수 없다. 따라서, 신뢰할 수 있는 초저전력 설계에서 비동기 회로가 스케일링 이슈를 해결할 수 있는 방법으로 최근 다시 고려되고 있다. 그러나, 디지털 시스템에서 동기회로를 NCL 회로로 모두 대체하는 것은 쉽지가 않기때문에 동기회로와 비동기 회로 사이의 연결이 꼭 필요하다. 본 논문에서는 동기회로와 비동기 회로를 연결할 수 있는 새로운 설계방법을 보이고, 0.18um 공정기술을 사용한 $4{\times}4$ 곱셈기를 사용해서 검증을 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.573-575
• /
• 1994

Resent research activities and technical trends for UPS(UNINTERRUPTIBLE POWER SUPPLY) are reviewed. There are increasing demands for UPS to get mote useful performance. This needs are high-efficiency, high-confidency, high-quality, low-cost. self-diagnosis. maintenance-free, and a wide variety of options. These can be satisfied with high-technology and optimal system coordination. In this paper. according to these demands. a newly developed UPS and a wide variety of options are introduced. Also. the data related are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.939-941
• /
• 2003

High Speed permanent magnet machines are currently being developed for a number of applications including gas turbine power plants, air conditioning systems, machine tools, gas pumps, high performance vacuum pumps, flywheel energy storage systems, aircraft fuel pumps, and so on. Using a high-speed machine eliminates the necessity of the mechanical gearbox and could certainly increase the system efficiency and reduce the total cost. In addition, a high-speed machine has the advantage of small dimension and low weight, i.e. low weight to power and volume to power ratio. This paper presents a review of some important applications (mostly still under development) where high-speed machines arc used, highlighting the advantages of the technology in each case.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.323-324
• /
• 2014

A higher-order power converter topology for an extremely low coupling (less than 0.15) transformer with high efficiency and wide air-gap (23 mm) is presented in this paper. Among the typical resonant converter topologies for contact-less power transferring systems, Series-Series Resonant Converter (SSRC) and Series-Parallel Resonant Converter (SPRC) are widely used in number of power electronic applications. However, when coupling coefficient of a transformer is seriously low (k<0.5), the series-series resonant converter will possibly operate at short circuited condition because of the small magnetizing impedance. To solve this problem, a modified and improved topology of seventh-order resonant converter for contact-less power converter system is proposed and the results are presented.

• 한국정보통신학회논문지
• /
• 제25권11호
• /
• pp.1596-1602
• /
• 2021

사물인터넷 시스템에서 배터리로 동작하는 사물인터넷 장치는 저전력 소모가 필수이다. 일반적으로 사물인터넷 장치들은 주기적으로 수면 상태에 진입하여 전력 소모를 줄인다. 하지만 비동기 사용자 요구 환경에서는 응답시간을 줄이기 위해 듀티 사이클을 줄여야 하므로 전력 소모 절감 효과가 줄어든다. 본 논문에서는 실내 전등 제어와 같은 비동기 제어가 필요한 환경에서도 장치의 전력 소모 절감 효과를 높일 수 있는 새로운 기법을 제안한다. 제안하는 반복 깨우기(repetitive wake-up) 기법은 스마트폰에서 깨우기 신호를 반복적으로 전송하고 사물인터넷 장치는 듀티 사이클을 최소화함으로써 전력 소모를 줄일 수 있다. 스마트폰 앱과 사물인터넷 장치를 구현하고 실험을 통해 제안하는 반복 깨우기 기법이 기존의 동기적 수면/활동 기법보다 최대 5배 이상 전력 소모를 줄일 수 있음을 보였다.

• 한국ITS학회 논문지
• /
• 제7권3호
• /
• pp.95-99
• /
• 2008

본 논문은 저 전력 설계 자동화를 위한 새로운 최소 자원 상위 레벨 합성 알고리즘을 제안한다. 제안된 알고리즘은 상위 레벨 합성 동안에 기능 연산자의 소비 전력 최소화를 위해 효율적인 접근 방식을 실행한다. 본 논문에서는 CDFG의 스위칭 활동을 감소시키기 위해 모든 제어 스텝을 하나씩 차례로 방문한다. 레지스터 공유 알고리즘은 모든 변수들의 생명 주기를 분석 한 후, 최소의 레지스터들을 결정한다. 또한 기능 단위의 입력 신호의 특성에 따라 모든 제어 스텝을 하나씩 차례로 방문하고, 갈망 방법에 따라 각 제어 스텝의 소비 전력을 최소화하여 자원 할당을 수행한다. 제안된 저 전력설계 자동화를 위한 최소 자원 상위 레벨 합성 알고리즘은 다양한 벤치마크들의 예를 통해 효율성을 입증한다.