• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.77-87
• /
• 2018

Many researches have been focused on localization in WSNs. However, the solutions for localization in static WSN are hard to apply to the mobile WSN. The solutions for mobile WSN localization have the assumption that there are a significant number of anchor nodes in the networks. In the resource limited situation, these solutions are difficult in applying to the static and mobile mixed WSN. Without using the anchor nodes, a localization service cannot be provided in efficient, accurate and reliable way for mixed wireless sensor networks which have a combination of static nodes and mobile nodes. Also, accuracy is an important consideration for localization in the mixed wireless sensor networks. In this paper, we presented a method to satisfy the requests for the accuracy of the localization without anchor nodes in the wireless sensor networks. Hop coordinates measurements are used as an accurate method for anchor free localization. Compared to the other methods with the same data in the same category, this technique has better accuracy than other methods. Also, we applied a minimum spanning tree algorithm to satisfy the requests for the efficiency such as low communication and computational cost of the localization without anchor nodes in WSNs. The Java simulation results show the correction of the suggested approach in a qualitative way and help to understand the performance in different placements.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.2
• /
• pp.45-56
• /
• 2013

The precise identification of vehicle positions, known as the vehicle localization problem, is an important requirement for building intelligent vehicle ad-hoc networks (VANETs). To solve this problem, two categories of solutions are proposed: stand-alone and data fusion approaches. Compared to stand-alone approaches, which use single information including the global positioning system (GPS) and sensor-based navigation systems with differential corrections, data fusion approaches analyze the position information of several vehicles from GPS and sensor-based navigation systems, etc. Therefore, data fusion approaches show high accuracy. With the position information on a set of vehicles in the preprocessing stage, data fusion approaches is used to estimate the precise vehicular location in the local map building stage. This paper proposes an efficient local map building scheme, which increases the accuracy of the estimated vehicle positions via V2V communications. Even under the low ratio of vehicles with communication modules on the road, the proposed local map building scheme showed high accuracy when estimating the vehicle positions. From the experimental results based on the parameters of the practical vehicular environments, the accuracy of the proposed localization system approached the single lane-level.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.2
• /
• pp.187-194
• /
• 2015

Accurate relative location estimation is a key requirement in indoor localization systems based on wireless sensor networks (WSNs). However, although these systems have applied not only various optimization algorithms but also fusion with sensors to achieve high accuracy in position determination, they are difficult to provide accurate relative azimuth and locations to users because of cumulative errors in inertial sensors with time and the influence of external magnetic fields. This paper based on ultra-wideband positioning system, which is relatively suitable for indoor localization compared to other wireless communications, presents an indoor localization system for estimating relative azimuth and location of location-unaware nodes, referred to as target nodes without applying any algorithms with complex variable and constraints to achieve high accuracy. In the proposed method, the target nodes comprising three mobile nodes estimate the relative distance and azimuth from two reference nodes that can be installed by users. In addition, in the process of estimating the relative localization information acquired from the reference nodes, positioning errors are minimized through a novel modified rounding estimation technique in which Kalman filter is applied without any time consumption algorithms. Experimental results show the feasibility and validity of the proposed system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.6
• /
• pp.594-600
• /
• 2012

Accurate localization is very important to stable navigation of a mobile robot. This paper deals with local localization of a mobile robot especially for outdoor environments. The GPS information is the easiest way to obtain the outdoor position information. However, the GPS accuracy can be severely affected by environmental conditions. To deal with this problem, the GPS and wheel odometry can be combined using an EKF (Extended Kalman Filter). However, this is not enough for safe navigation of a mobile robot in outdoor environments. This paper proposes a novel method using lane features from the road image. The pose data of a mobile robot can be corrected by analyzing the detected lane features. This can improve the accuracy of the localization process substantially.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.8
• /
• pp.845-850
• /
• 2009

Localization which estimates a robot's position and orientation in a given environment is very important for mobile robot navigation. Although low-cost sensors are preferred for practical service robots, they suffer from the inaccurate and insufficient range information. This paper proposes a novel approach to increasing the success rate of low-cost sensor-based localization. In this paper, both the previous and the current data obtained from the IR sensors are used for localization in order to utilize as much environment information as possible without increasing the number of sensors. The sensor model used in the monte carlo localization (MCL) is modified so that the accumulated range information may be used to increase the accuracy in estimating the current robot pose. The experimental results show that the proposed method can robustly estimate the robot's pose in indoor environments with several similar places.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.10
• /
• pp.55-62
• /
• 2016

In this paper, we present indoor localization technologies using the bluetooth signal categorizing them into proximity based, triangulation based and fingerprinting based technologies. Then we provide localization accuracy improvement algorithms such as moving average, K-means, particle filter, and K-Nearest neighbor algorithms. We define important performance issues for indoor localization technologies and analyze recent technologies according to the performance issues. Finally we provide experimental results for correlation between RSSI and distance. We believe that this paper provide wise view and necessary information for recent localization technologies using the bluetooth signal.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.87-107
• /
• 2015

Considering the localization estimation issue in mixed line-of-sight (LOS)/non-LOS(NLOS) environments based on received signal strength (RSS) measurements in wireless sensor networks, a grid-based correlation method based on the relationship between distance and RSS is proposed in this paper. The Maximum-Likelihood (ML) estimator is appended to further improve the localization accuracy. Furthermore, in order to reduce computation load and enhance performance, an improved recursively version with NLOS mitigation is also proposed. The most advantages of the proposed localization algorithm is that, it does not need any prior knowledge of the propagation model parameters and therefore does not need any offline calibration effort to calibrate the model parameters in harsh environments, which makes it more convenient for rapid implementation in practical applications. The simulation and experimental results evidence that the proposed localization algorithm exhibits good localization performance and flexibilities for different devices.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.237-240
• /
• 2000

We have proposed a simple method based on IIR filters for realizing sound image localization. How-ever the nonlinearity of phase characteristics of the IIR filters, which are used for sound image localization, cause decrease of the localization accuracy. In this paper we investigate the influence of phase characteristics on the sound localization. Head-related transfer functions (HRTFs) of a dummy-head are approximated by the IIR filter. We carried out sound image localization experiment with 2-loudspeaker reproduction using the approximated HRTFs. Then the errors which obtained from experiments were compared with the theoretical values which were estimated from the phase shifts of the IIR filters. As a result there was little influence of the nonlinear phase characteristics of the IIR fitters in the localization on the horizontal plane.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.4
• /
• pp.551-560
• /
• 2010

In this paper, we suggest a localization method of factors affecting the accuracy of Air-to-Ground weapon delivery. The proposed method, called FBEL(Factor-Based Error Localization), is based on the fault localization technique widely utilized in the realm of software engineering field. FBEL localizes the major factors affecting the performance of weapon delivery. To analyze the effectiveness and the applicability of FBEL, we applied FBEL to real firing data and got the major factors caused the errors. We expect that the method could contribute to improve the quality of weapon delivery system. We also expect that it may aid improvement of pilot capability greatly, if it is applied to pilot firing training.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2007.11a
• /
• pp.357-361
• /
• 2007

This paper presents a multi-robot localization based on Bayesian Multidimensional Scaling (BMDS). We propose a robust MDS to handle both the incomplete and noisy data, which is applied to solve the multi-robot localization problem. To deal with the incomplete data, we use the Nystr${\ddot{o}}$m approximation which approximates the full distance matrix. To deal with the uncertainty, we formulate a Bayesian framework for MDS which finds the posterior of coordinates of objects by means of statistical inference. We not only verify the performance of MDS-based multi-robot localization by computer simulations, but also implement a real world localization of multi-robot team. Using extensive empirical results, we show that the accuracy of the proposed method is almost similar to that of Monte Carlo Localization(MCL).