• The Journal of the Convergence on Culture Technology
• /
• v.7 no.2
• /
• pp.49-60
• /
• 2021

The purpose of this study was to examine the introduction of certification evaluation system for quality management of extracurricular program of Duksung Women's University. The research method was composed of two procedures, such as literature analysis and expert meetings. The contents of the study consisted of the accompanying conditions for the introduction of the certification evaluation system to implement the quality management of the extracurricular programs, which is operated in various ways in order to support the reinforcement of students' learning competencies at Duksung Women's University, according to a more formal level and a systematic flow. As a result of the study, the 「Regulations on the Evaluation of Extracurricular Program Certification」 is not only the main foundation for actualizing the link flow between continuous monitoring of extracurricular programs and annual performance evaluation, but also the common points for each university that is establishing the integrated management support system of comparative programs including Duksung Women's University.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3D
• /
• pp.329-334
• /
• 2009

The various behaviors of vehicular traffic flow are generated through both car-following and lane-changing behaviors of vehicles. Especially lane-usage varies by lane-changing behaviors. In the area of microscopic vehicle simulation, a lane-changing model connected to a car-following model parallel is essential to generate both various traffic flows relationships and laneusages. In Korea, some studies on car-following models have been reported, but few studies for lane-changing models stay in the beginning stage. In this paper, a two-lane changing model for the simulation modeling of large freeway network is introduced. The lane-changing model is developed based on CA (Cellular Automata) model. The developed model is parallel combined with an existing CA car-following model and tested on a closed link system. The results of simulation show that the developed model generates the various behaviors of lane usage, which existing CA lane-changing models could not generate. The presented model is expected to be used for the simulation of more various freeway traffic flows.

• Journal of KIISE:Information Networking
• /
• v.36 no.6
• /
• pp.492-504
• /
• 2009

The delivery of multimedia that efficiently adapts its bit-rate to changing network characteristics and conditions is one of the important challenging tasks in the design of today's real-time multimedia streaming systems such as IPTV, Mobile IPTV and so on. In these work, the primary focus is on network congestion, to improve network stability and inter-protocol fairness. However, these existing works have problems which do not support QoE (Quality of Experience), because they did not consider essential characteristics of contents playback such as the media continuity. In this paper, we propose a novel rate control scheme for improving the QoE of multimedia streaming service in the Internet congestion, called NCAR (Network and Client-Aware Rate control), which is based on network-aware congestion control and client-aware flow control scheme. Network-aware congestion control of the NCAR offers an improving reliability and fairness of multimedia streaming, and reduces the rate oscillation as well as keeping high link utilization. Client-aware flow control of NCAR offers a removing the media discontinuity and a suitable receiver buffer allocation, and provides a good combination of low playback delay. Simulation results demonstrate the effectiveness of our proposed schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5B
• /
• pp.465-475
• /
• 2004

Transport Control Protocol (TCP) has been implemented in software running on CPU in end systems, and the protocol processing has appeared as a new bottleneck due to advanced link technology. TCP processing is a critical issue in Storage Area Network (SAN) such as iSCSL, and the overall performance of the Storage Area Network heavily depends on speed of TCP processing. TCP Engine implemented in hardware reduces the load of CPU in end systems as well as accelerates the protocol processing, and hence high speed data processing is achieved. In this paper, we have proposed a hardware engine for TCP processing. TCP engine consists of three major block, TCP Connection block Rx TCP block and Tx TCP block TCP Connection block is responsible for managing TCP connection states. Rx TCP block is responsible for receive flow which receives packets from network and sends to CPU. Rx TCP performs header and data processing and sends header information to TCP connection block and Tx TCP block It also assembles out-of-ordered data to in-ordered before it transfers data to CPU. Tx TCP block is responsible for transmit flow which transfers data from CPU to network. Tx TCP performs retransmission for reliable data transfer and management of transmit window and sequence number. Various test-cases are used to verify the TCP functions. The TCP Engine is synthesized using 0.18 micron technology and results in 51K gates not including buffers for temporal data storage.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.5
• /
• pp.219-231
• /
• 2005

Many applications in cluster computing require QoS (Quality of Service) services. Since performance predictability is essential to provide QoS service, underlying systems must provide predictable performance guarantees. One way to ensure such guarantees from network subsystems is to generate global schedules from applications'network requests and to execute the local portion of the schedules at each network interface. To ensure accurate execution of the schedules, it is essential that a global time base must be maintained by local clocks at each network interface. The task of providing a single time base is called a synchronization problem and this paper addresses the problem for system area networks. To solve the synchronization problem, FM-QoS (1) proposed a simple synchronization mechanism called FBS(Feedback-Based Synchronization) which uses built-in How control signals. This paper extends the basic notion of FM-QoS to a theoretical framework and generalizes it: 1) to identify a set of built-in network flow control signals for synchrony and to formalize it as a synchronizing schedule, and 2) to analyze the synchronization precision of FBS in terms of flow control parameters. Based on generalization, two application classes are studied for a single switch network and a multiple switch network. For each class, a synchroniring schedule is proposed and its bounded skew is analyzed. Unlike FM-QoS, the synchronizing schedule is proven to minimize the bounded skew value for a single switch network. To understand the analysis results in practical networks, skew values are obtained with flow control parameters of Myrinet-1280/SAN. We observed that the maximum bounded skew of FBS is 9.2 Usec or less over all our experiments. Based on this result, we came to a conclusion that FBS was a feasible synchronization mechanism in system area networks.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.4
• /
• pp.284-288
• /
• 2009

With explosively growing PPI databases, the computational approach for a prediction and configuration of PPI network has been a big stream in the bioinformatics area. Recent researches gradually consider physicochemical properties of proteins and support high resolution results with integration of experimental results. With regard to current research trend, it is very close future to complete a PPI network configuration of each organism. However, direct applying the PPI network to real field is complicated problem because PPI network is only a set of co-expressive proteins or gene products, and its network link means simple physical binding rather than in-depth knowledge of biological process. In this paper, we suggest a protein functional flow model which is a directed network based on a protein functions' relation of signaling transduction pathway. The vertex of the suggested model is a molecular function annotated by gene ontology, and the relations among the vertex are considered as edges. Thus, it is easy to trace a specific function's transition, and it can be a constraint to extract a meaningful sub-path from whole PPI network. To evaluate the model, 11 functional flow models of Homo sapiens were built from KEGG, and Cronbach's alpha values were measured (alpha=0.67). Among 1023 functional flows, 765 functional flows showed 0.6 or higher alpha values.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.628-636
• /
• 2019

In various industrial processes, piping serves as a link between unit processes and is an essential installation for internal flow. Therefore, the optimum design of the piping system is very important in terms of safety and cost, which requires the estimation of the pressure drop, flow rate, pipe size, etc. in the piping system. In this study, we developed a software that determines pressure drop, flow rate, and pipe size when any two of these design variables are known. We categorized the flows into single phase, homogeneous two phase, and separated two phase flows, and applied suitable calculation models accordingly. We also constructed a system library for the calculation of the pipe material, relative roughness, fluid property, and friction coefficients to minimize user input. We further created a costing library according to the piping material for the calculation of the investment cost of the pipe per unit length. We implemented all these functions in an integrated environment using a graphical user interface for user convenience, and C # programming language. Finally, we verified the accuracy of the software using literature data and examples from an industrial process with obtained deviations of 1% and 8.8% for the single phase and two-phase models.

• Journal of the Korean Society for information Management
• /
• v.4 no.1
• /
• pp.154-169
• /
• 1987

The Computerizing Record Management System(RMS) has been developed for ULJIN Nuclear Power Plant in Korea on the basis of the Manual System. By means of review and analysis of processing flow & project requirements, system logics such as Receiving system, Logging system, Distribution system, Filing system, Indexing & Retrieval system and Output system of statistic and various reports, have been established for computerizing. Structure of Masterfile has been designed so as to include Bibliographic data, Transmittal data, Distribution data, Area data, RMS data for operation of Plant. The RMS data have been designed for construction and operation of the plant by adding index parameters for operation such as System code, KEPCO No., Component link code and Retention period on the point of receiving. The RMS has turned out an easy access to cross-reference between RMS and Material Control System.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.296-300
• /
• 2004

A new MR cylinder with built-in valves using MR fluid (MR valve) is proposed for fluid power control systems. The MR or Magneto-Rheololgical fluid is a newly developed functional fluid whose obvious viscosity is controlled by the applied magnetic field intensity. The MR cylinder is composed of cylinder with small clearance and piston with electromagnet. The differential pressure is controlled by the applied magnetic field intensity. It has the characteristics of simple, compact and reliable structure. The size of MR cylinder and piston has ${\varphi}$60mm${\times}$259mm and ${\varphi}$58mm${\times}$136.5mm in face size respectively and 0.8mm in gap length. Through experiments on the static characteristics, it is found that the differential pressure is controlled by the applied magnetic field intensity under little influence of the flow rate, which corresponds to a pressure control valve. Effectiveness of the MR cylinder is demonstrated through the position control of one link MR manipulator.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.3
• /
• pp.312-319
• /
• 2015

The grinding and furbishing process as the finishing process for molds include the works such as the grinding, buffing, lapping and polishing among others. A finishing tool unit is applied to this finishing process for the burr, lapping, polishing and others of molds. A finishing tool unit can carry out the flexible machining, depending on the machining allowance for objects to be cut on the basis of the instrumental driving mechanism which enables the up, down, left and right floating, which is applied in link with the dedicated cutters and robot machining systems. This study selected the shape to increase the rotatory force of an impeller when air is discharged during the driving of a finishing tool unit, and reflected it to the impeller designing. In addition, the study analyzed each flow velocity and pressure distribution per air pressurization value and finally analyzed the rotating torque to suggest the optimal conditions in designing impellers.