• 산업기술연구
• /
• 제29권B호
• /
• pp.127-131
• /
• 2009

This paper presents the development of smart counting system that is proper for grains with uneven unit weight or shape. This device can detect the small differences of a light beam and count the pulse from wave shape control, when the grain is going on the light screen, which is made by the light beam screen sensor. It can, different from the former conventional device, distinct the uneven grains for counting detect, by using the dedicated hardware and the software algorithm of the light sensor.

• 대한의생명과학회지
• /
• 제14권2호
• /
• pp.91-96
• /
• 2008

Light Emitting Diode (LED) of 880 nm was used as a function of luminosity in culture of the photosynthetic bacteria including Rhodobacter sp.. An array of 880 run LED was driven with an energy density of $6.0mW/cm^2$. In processing time, we were able to show that the cell growth were gained of significant changes in the pigment and in the dry weight. And we also showed that photosynthetic bacteria had the resonable relativity of optical density to dry weight. LED-880nm is of great significance for the potential use of photo-bioreactor construction.

• Macromolecular Research
• /
• 제14권1호
• /
• pp.81-86
• /
• 2006

Poly(fluorenylenevinylene-terphenylenevinylene) containing phenyl pendant group was synthesized by Suzuki coupling reaction and characterized by ${1}^H$-NMR, ${13}^C$-NMR, and IR-spectrum. The weight average molecular weight ($M_{w}$) of the obtained polymer was 31,000 with a polydispersity index of 1.9. The polymer showed good solubility in common organic solvents, and the solution and film emitted blue emission ($\lambda_{max}$=460 nm) on irradiation with UV light. The ITO/PEDOT/polymer/Al device fabricated using the polymer as an emitting layer emitted blue light with a maximum peak around 460 nm. The maximum efficiency of the device was 0.011$\%$.

• 한국산학기술학회논문지
• /
• 제15권7호
• /
• pp.4489-4493
• /
• 2014

LED 조명 구동장치는 150W 이상에서 효율과 발열문제가 있고 W(와트)수가 다른 조명기기를 교체하는데 불편함이 있다. 본 논문에서는 멀티채널 LED 조명 구동장치를 드라이버 연동형 구조의 전원시스템과 멀티채널 구조형태의 드라이버 회로내장형으로 설계하였다. 본 개발품은 전원효율 93% 이상 및 역율 0.98 이상의 자동 제어 컨버터 구조로써 드라이버 연동형 구조의 고효율 LED 조명 구동장치와 자기보상방식의 자기최적화 구조의 드라이버다. 따라서, 본 논문은 THD 10% 이하와 기존 컨버터 대비 중량이 40% 이상 감소하였다.

• Journal of the korean society of oceanography
• /
• 제34권3호
• /
• pp.179-183
• /
• 1999

A light-weight multiple piston corer to meet increasing coring needs in areas where R/V access is limited, is designed and discussed. Hydraulically-damped and spring-driven piston system not only virtually undisturbed surface sediments but also facilitate the recovery and subsequent operation including pore water extraction and core slicing on board the ship. It is designed as compact, light-weight and easy to dissemble that whole gear can be carried by small passenger vehicle yet it permits thick-walled core tube for thermal insulation or large opening core tubes. Because single spring instead of heavy weights of conventional gravity-driven multiple corers is used, this device is very simple and cheap to construct.

• 대한임베디드공학회논문지
• /
• 제17권4호
• /
• pp.229-237
• /
• 2022

Motion recognition is very useful for implementing an intuitive HMI (Human-Machine Interface). In particular, hands are the body parts that can move most precisely with relatively small portion of energy. Thus hand motion has been used as an efficient communication interface with other persons or machines. In this paper, we design and implement a light-weight ANN (Artificial Neural Network)-based hand motion recognition using a state-of-the-art flex sensor. The proposed design consists of data collection from a wearable flex sensor, preprocessing filters, and a light-weight NN (Neural Network) classifier. For verifying the performance and functionality of the proposed design, we implement it on a low-end embedded device. Finally, our experiments and prototype implementation demonstrate that the accuracy of the proposed hand motion recognition achieves up to 98.7%.

• 한국산업정보학회논문지
• /
• 제24권4호
• /
• pp.9-19
• /
• 2019

경량 임베디드 디바이스가 저전력 네트워킹뿐만 아니라 고정밀 센서 데이터 획득과 같은 영역에서 널리 활용되면서 소프트웨어 타이머에 대한 높은 시간정확성이 요구된다. 이 논문은 경량 MCU(Micro controller unit)를 장착한 임베디드 디바이스 환경에서 소프트웨어 타이머의 정확성 문제를 다룬다. 먼저, 소프트웨어 타이머의 전형적 구현 모델을 구현할 때 오차를 발생시키는 주요 오버헤드의 유형을 면밀히 분석한 후에 실제 환경에서 오버헤드를 측정한다. 이 오버헤드를 타이머 설정주기에 반영하는 오버헤드 보정 기법을 통해 소프트웨어 타이머의 정확성을 향상시킬 수 있다는 점을 검증한다.

• 한국정보통신학회논문지
• /
• 제11권12호
• /
• pp.2298-2305
• /
• 2007

최근 임베디드 시스템에 대한 많은 연구들이 진행 중이다. 임베디드 시스템은 점점 소형화 추세로 가고 있다. DOM(Disk On Module)저장장치는 공간에 제한이 있는 응용프로그램이나 모바일 등의 기기에 사용할 수 있다. 본 논문에서는 DOM(Disk On Module) 메모리를 사용하여, 리눅스 기반의 커널을 탑재하고, DOM 메모리 만으로 시스템이 구동될 수 있도록 한다. DOM(Disk On Module) 메모리의 용량 제한으로 인하여 소형 운영체제가 필수적이다. 이를 위해 본 논문은 기존의 리눅스 운영체제를 DOM 환경에 적합하도록 경량화시켜서 설계하였다. 리눅스 운영체제를 경량화한 후, DOM(Disk On module)에 부트 로더의 한 종류인 LILO를 설치하여 DOM(Disk On module)메모리 상에서 새롭게 설계된 경량 리눅스 운영체제가 일반 리눅스 운영체제처럼 부팅될 수 있게 만들어 준다. 본 논문은 일반 리눅스 PC와 성능을 비교하는 실험을 수행하였다.

• 전기학회논문지
• /
• 제58권9호
• /
• pp.1764-1768
• /
• 2009

As the demand of electric power is increasing rapidly, the need of the compact and light electric power device is also increased. Copper clad aluminum (CCA) is newly proposed electrical conductor, because of its light-weight and low-cost characteristics, to replace the existing conductor made of copper. This paper presents the salt-proof characteristics of the copper clad aluminum (CCA) to certificate long time safe operation of the newly proposed electrical conductor. The two types of the CCA conductor were tested in the neutral salt spray tester. The experimental results of two types of the CCA with salt spray were presented in this paper. The results comprise resistance measured data, micro picture of the selected surface, and component measured data according to the elapsed time. The period of the experiment was 1,000 hours. There was no evidence to show the corrosion of CCA during the whole period of the experiments.

• Macromolecular Research
• /
• 제15권3호
• /
• pp.216-220
• /
• 2007

A new polyfluorene-based copolymer having 2-ethylhexyloxy-5-methoxy-l,4-phenylene as an electron donating group and 2,5-diphenyl-oxadiazole as an electron withdrawing group was synthesized by the Suzuki coupling reaction. The obtained copolymer was characterized by $^1H-NMR,\;^{13}C-NMR$, and IR-spectroscopy. The weight average molecular weight ($M_w$) of the obtained polymer was 18,600 with a polydispersity index of 1.5. The maximum photoluminescence of the solution and film of the polymer was observed at 453 nm and 456 nm, respectively. A double-layer device with the configuration, ITO/PEDOT/copolymer/Al, emitted blue light at 460 nm.