• Geomechanics and Engineering
• /
• v.21 no.4
• /
• pp.357-369
• /
• 2020

Different from the conventional planar fracture and simplified Newton model, for power-law slurries with a lower water-cement ratio commonly used in grouting engineering, flow model in geological rough fractures is built based on ten standard profiles from Barton (1977) in this study. The numerical algorithm is validated by experimental results. The flow mechanism, grout superiority, and water plugging of pseudo plastic slurry are revealed. The representations of hydraulic grouting properties for JRCs are obtained. The results show that effective plugging is based on the mechanical mechanisms of the fluctuant structural surface and higher viscosity at the middle of the fissure. The formulas of grouting parameters are always variable with the roughness and shear movement, which play a key role in grouting. The roughness can only be neglected after reaching a threshold. Grouting pressure increases with increasing roughness and has variable responses for different apertures within standard profiles. The whole process can be divided into three stationary zones and three transition zones, and there is a mutation region (10 < JRCs < 14) in smaller geological fractures. The fitting equations of different JRCs are obtained of power-law models satisfying the condition of -2 < coefficient < 0. The effects of small apertures and moderate to larger roughness (JRCs > 10.8) on the permeability of surfaces cannot be underestimated. The determination of grouting parameters depends on the slurry groutability in terms of its weakest link with discontinuous streamlines. For grouting water plugging, the water-cement ratio, grouting pressure and grouting additives should be determined by combining the flow conditions and the apparent widths of the main fracture and rough surface. This study provides a calculation method of grouting parameters for variable cement-based slurries. And the findings can help for better understanding of fluid flow and diffusion in geological fractures.

• Korean Journal of Radiology
• /
• v.24 no.7
• /
• pp.668-680
• /
• 2023

Objective: To compare multiparametric magnetic resonance imaging (MRI) features of intraductal carcinoma of the prostate (IDC-P) with those of prostatic acinar adenocarcinoma (PAC) and develop prediction models to distinguish IDC-P from PAC and IDC-P with a high proportion (IDC ≥ 10%, hpIDC-P) from IDC-P with a low proportion (IDC < 10%, lpIDC-P) and PAC. Materials and Methods: One hundred and six patients with hpIDC-P, 105 with lpIDC-P and 168 with PAC, who underwent pretreatment multiparametric MRI between January 2015 and December 2020 were included in this study. Imaging parameters, including invasiveness and metastasis, were evaluated and compared between the PAC and IDC-P groups as well as between the hpIDC-P and lpIDC-P subgroups. Nomograms for distinguishing IDC-P from PAC, and hpIDC-P from lpIDC-P and PAC, were made using multivariable logistic regression analysis. The discrimination performance of the models was assessed using the receiver operating characteristic area under the curve (ROC-AUC) in the sample, where the models were derived from without an independent validation sample. Results: The tumor diameter was larger and invasive and metastatic features were more common in the IDC-P than in the PAC group (P < 0.001). The distribution of extraprostatic extension (EPE) and pelvic lymphadenopathy was even greater, and the apparent diffusion coefficient (ADC) ratio was lower in the hpIDC-P than in the lpIDC-P group (P < 0.05). The ROC-AUCs of the stepwise models based solely on imaging features for distinguishing IDC-P from PAC and hpIDC-P from lpIDC-P and PAC were 0.797 (95% confidence interval, 0.750-0.843) and 0.777 (0.727-0.827), respectively. Conclusion: IDC-P was more likely to be larger, more invasive, and more metastatic, with obviously restricted diffusion. EPE, pelvic lymphadenopathy, and a lower ADC ratio were more likely to occur in hpIDC-P, and were also the most useful variables in both nomograms for predicting IDC-P and hpIDC-P.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.2
• /
• pp.187-194
• /
• 2020

Two types of sodium cobalt pyrophosphates, triclinic Na_3.12Co_2.44(P₂O₇)₂ and orthorhombic Na₂CoP₂O₇, are compared as high-voltage cathode materials for Na-ion batteries. Na₂CoP₂O₇ shows no electrochemical activity, delivering negligible capacity. In contrast, Na_3.12Co_2.44(P₂O₇)₂ exhibits good electrochemical performance, such as high redox potential at ca. 4.3 V (vs. Na/Na⁺) and stable capacity retention over 50 cycles, although Na_3.12Co_2.44(P₂O₇)₂ delivered approximately 40 mA h g^-1. This is attributed to the fact that Na₂CoP₂O₇ (~3.1 Å) has smaller diffusion channel size than Na_3.12Co_2.44(P₂O₇)₂ (~4.2 Å). Moreover, the electrochemical performance of Na_3.12Co_2.44(P₂O₇)₂ is examined using Na cells and Li cells. The overpotential of Na cells is smaller than that of Li cells. This is due to the fact that Na_3.12Co_2.44(P₂O₇)₂ has a smaller charge transfer resistance and higher diffusivity for Na⁺ ions than Li⁺ ions. This implies that the large channel size of Na_3.12Co_2.44(P₂O₇)₂ is more appropriate for Na⁺ ions than Li⁺ ions. Therefore, Na_3.12Co_2.44(P₂O₇)₂ is considered a promising high-voltage cathode material for Na-ion batteries, if new electrolytes, which are stable above 4.5 V vs. Na/Na⁺, are introduced.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.3
• /
• pp.17-24
• /
• 2021

Perovskite solar cells (PSCs) can be fabricated through solution process economically with variable bandgap that is controlled by composition of precursor solution. Tandem cells in which PSCs combined with silicon solar cells have potential to reach high power conversion efficiency over 30%, however, lack of long-term stability of PSCs is an obstacle to commercialization. Degradation of PSCs is mainly attributed to the mass transport of halide and metal electrode materials. In order to ensure the long-term stability, the mass transport should be inhibited. In this study, we confirmed degradation behaviors due to the mass transport in PSCs and designed buffer layers with LiF and/or SnO₂ to improve the long-term stability by suppressing the mass transport. Under high-temperature storage test at 85℃, PSCs without the buffer layers were degraded by forming PbI₂, AgI, and the delta phase of the perovskite material, while PSCs with the buffer layers showed improved stability with keeping the original phase of the perovskite. When the LiF buffer and encapsulation were applied to PSCs, superior long-term stability on 85℃-85% RH dump heat test was achieved; efficiency drop was not observed after 200 h. It was also confirmed that 90.6% of the initial efficiency was maintained after 200 hours of maximum power tracking test under AM 1.5G-1SUN illumination. Here, we have demonstrated that the buffer layer is essential to achieve long-term stability of PSCs.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.2
• /
• pp.119-132
• /
• 2010

In this study, 2-dimensional inundation analysis for Taehwa watershed in Ulsan metropolitan city was conducted to analyze flow behaviors, inundation depth and inundation stage, considering the building effect. Lidar having the interval of 1 m was employed to generate topographic data with 10m interval, and building data extracted from digital map was combined with the constructed topographic data for 2-dimensional inundation analysis. A few scenarios were constructed for the analysis to provide an effective and accurate inundation analysis method through analyzing the results. The disagreement based on the areas of inundation showed over 10% between the cases with and without consideration of building effect. The maximum inundation depth without considering the effects of buildings was 0.29m higher than that with considering the building effects. On the contrary, the maximum inundation stage with consideration of building effects was 0.49m higher than that without consideration of building effects.

• Korean Journal of Materials Research
• /
• v.26 no.1
• /
• pp.54-60
• /
• 2016

We have investigated the crystallization mechanism of the lithium disilicate ($Li_2O-2SiO_2$, LSO) glass particles with different sizes by isothermal and non-isothermal processes. The LSO glass was fabricated by rapid quenching of melt. X-ray diffraction and differential scanning calorimetry measurements were performed. Different crystallization models of Johnson-Mehl-Avrami, modified Ozawa and Arrhenius were adopted to analyze the thermal measurements. The activation energy E and the Avrami exponent n, which describe a crystallization mechanism, were obtained for three different glass particle sizes. Values of E and n for the glass particle with size under $45{\mu}m$, $75{\sim}106{\mu}m$, and $125{\sim}150{\mu}m$, were 2.28 eV, 2.21 eV, 2.19 eV, and ~1.5 for the isothermal process, respectively. Those values for the non-isothermal process were 2.4 eV, 2.3 eV, 2.2 eV, and ~1.3, for the isothermal process, respectively. The obtained values of the crystallization parameters indicate that the crystallization occurs through the decreasing nucleation rate with a diffusion controlled growth, irrespective to the particle sizes. It is also concluded that the smaller glass particles require the higher heat absorption to be crystallized.

• Korean Journal of Materials Research
• /
• v.17 no.7
• /
• pp.366-370
• /
• 2007

Silicon nitride ($Si_3N_4$) ceramics have been considered for various components of nuclear power plants such as the mechanical seal of a reactor coolant pump (RCP), the guide roller for a control rod drive mechanism (CRDM), and a seal support, etc. Corrosion behavior of $Si_3N_4$ ceramics in a high-temperature and high-pressure water must be elucidated before they can be considered as components for nuclear power plants. In this study, the corrosion behaviors of $Si_3N_4$ ceramics containing MgO and $Al_2O_3$ as sintering aids were investigated at a hydrothermal condition ($300^{\circ}C$, 9.0 MPa) in pure water and 35 ppm LiOH solution. The corrosion reactions were controlled by a diffusion of the reactive species and/or products through the corroded layer. The grain-boundary phase was preferentially corroded in pure water whereas the $Si_3N_4$ grain seemed to be corroded at a similar rate to the grain-boundary phase in LiOH solution. Flexural strengths of the $Si_3N_4$ ceramics were significantly degraded due to the corrosion reaction. Results of this study imply that a variation of the sintering aids and/or a control (e.g., crystallization) of the grain-boundary phase are necessary to increase the corrosion resistance of $Si_3N_4$ ceramics in a high-temperature water.

• Korean Chemical Engineering Research
• /
• v.55 no.6
• /
• pp.861-867
• /
• 2017

In order to improve the capacity and cycling stability of Ni-rich NCA cathode materials for lithium ion batteries, the boron and cobalt were doped in commercial $Li_{1.06}Ni_{0.91}Co_{0.08}Al_{0.01}O_2$ (NCA) powders. Commercial NCA particles are mixed composites such as secondary particles of about $5{\mu}m$ and $12{\mu}m$, and the particle size was decreased by doping boron and cobalt. The initial discharge capacities of the boron and cobalt doped NCA-B and NCA-Co were found to be 214 mAh/g and 200 mAh/g, respectively, which are higher values than that of the raw NCA cathode material. In particular, NCA-Co exhibits the best discharge capacity of 157 mAh/g after 20 cycles, which is probably due to the enhanced diffusion of lithium ion by crystal growth along with the c-axis direction.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.7
• /
• pp.905-913
• /
• 2014

Lj-RGD3, an RGD (Arg-Gly-Asp) toxin protein from the salivary gland of Lampetra japonica, exhibits antifungal activity against Candida albicans. Lj-RGD3 has three RGD motifs and shows homology to histidine-rich glycoprotein. We synthesised two mutant derivatives of Lj-RGD3: Lj-26, which lacks all three RGD motifs and contains no His residues; and Lj-112, which lacks only the three RGD motifs. We investigated the effects of the wild-type and mutated toxins on a gram-positive bacterium (Escherichia coli), a gram-negative bacterium (Staphylococcus aureus), and a fungus (C. albicans). rLj-RGD3 and its mutants exhibited antifungal but not antibacterial activity, as measured by a radial diffusion assay. The C. albicans inhibition zone induced by rLj-112 was larger than that induced by the other proteins, and its inhibitory effect on C. albicans was dose-dependent. In viable-count assays, the rLj-112 MIC was $7.7{\mu}M$, whereas the MIC of the positive control (ketoconazole) was $15{\mu}M$. Time-kill kinetics demonstrated that rLj-112 effectively killed C. albicans at $1{\times}$ and $2{\times}$ MIC within 12 and 6 h, respectively. Electron microscopy analysis showed that rLj-RGD3 and rLj-112 induced C. albicans lysis. Our results demonstrate a novel anticandidal activity for rLj-RGD3 and its mutant derivatives.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.509-516
• /
• 2015

We investigated the reduction leaching process of manganese dioxide ore using black locust as reductant in sulfuric acid solution. The effect of parameters on the leaching efficiency of manganese was the primary focus. Experimental results indicate that manganese leaching efficiency of 97.57% was achieved under the optimal conditions: weight ratio of black locust to manganese dioxide ore (WT) of 4:10, ore particle size of $63{\mu}m$, $1.7mol{\cdot}L^{-1}\;H_2SO_4$, liquid to solid ratio (L/S) of 5:1, leaching time of 8 h, leaching temperature of 368 K and agitation rate of $400r{\cdot}min^{-1}$. The leaching rate of manganese, based on the shrinking core model, was found to be controlled by inner diffusion through the ash/inert layer composed of associated minerals. The activation energy of reductive leaching is $17.81kJ{\cdot}mol^{-1}$. To conclude the reaction mechanism, XRD analysis of leached ore residue indicates manganese compounds disappear; FTIR characterization of leached residue of black locust sawdust shows hemicellulose and cellulose disappear after the leaching process.