• Journal of Korean Medicine Rehabilitation
• /
• v.25 no.1
• /
• pp.63-70
• /
• 2015

Objectives The purpose of this study is to understand the research trend of reports on forest therapy so far and analyze the Korean medicine therapy being applied in forest therapy programs. Methods We ran a keyword search on domestic databases with the following keyword 'forest therapy, forest healing, forest treatment, recreational forest, forest bath, forest experience'. The search took place in December 2014 and there was no limit to search time. A total of 334 forest therapy articles have been selected. Results The number of research on forest therapy continued to rise from 1985, with 334 articles being published from 84 journals. When those 188 articles were sorted by their contents and methods, except 146 articles of survey on simple satisfaction, recognition and visting, 94 were clinical studies, 79 were literature studies, 15 were experimental studies. Of the 94 clinical researches, there were 52 CCTs (Controled Clinical Trials), 39 ODs (efficacy studies with either a controlled or an Other than controlled Design) and 3 RCTs (Randomized Clinical Trials). Among the clinical researches, there were a total of 21 studies that used Korean Medicine programs, and meditation was the most popular, being used in 18 studies. Herbal food and tea therapy and Qigong were used in 3 studies each, and Korean medicine music programs were used in 2 studies. Conclusions A systematic and standardized Korean medicine forest therapy program must be developed, and based on the program, more research treating diseases should be conducted.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.01a
• /
• pp.277-279
• /
• 2013

본 논문에서는 광학적 방법을 이용하여 정색반응을 정량적으로 측정할 수 있는 방법을 제시한다. 정색반응은 발색, 변색의 현상을 일으키는 화학 변화로 시료 용액에 시약을 더하여 특수한 빛을 나타내게 하여, 물질을 정성적으로 검출하는데 이용된다. 하지만 정색반응 결과로 나타난 색상은 사람마다 색구별이 다르므로 정확한 양을 알 수는 없다. 본 연구에서는 시료의 양에 따라 색상 변화의 미세한 차이를 PICkit Serial Analyzer를 사용하여 색상을 수치화하여 시료의 양에 따른 색의 변화를 정량적으로 측정하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.10
• /
• pp.825-835
• /
• 2017

This paper aims to build a drone platform based on an optimum design of its single arm. Its single arm is assumed as a cantilevered beam with a tip mass. Based on the numerical optimization theory, validation and optimization of a new design is conducted by comparing the results with the similar ones obtained by ANSYS. Finally, this design is reflected in the control simulation, and the requirement of an optimum structural design considering the resonance situation is satisfied.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.2
• /
• pp.115-125
• /
• 1999

The purpose of this experimental research is to investigate the properties of workability and strength of the concrete containing admixtures such as silica fume, fly ash, ground granulated blast-furnace slag, and rice husk ash. For this purpose, the workability and the strength of the concrete containing each admixture were tested and analyzed according to the unit weight of binder and the replacement ratio of each admixture. As a result, considering their workability and strength, the existence of minimum binder weight and optimum replacement ratio of concrete containing admixture to plain concrete were obtained for each admixture.

• Journal of radiological science and technology
• /
• v.11 no.1
• /
• pp.25-31
• /
• 1988

Studies on the clinical significance with Amerlex $FT_{4}$ RIA kit observing the determination of $FT_{4}$ were investigated using a tracer as $^{125}I-T_{4}$ derivative which is not almostly bound to thyroxine binding globulin, etc. The results are followed; 1. $FT_{4}$ value($1,55{\pm}0.38ng/100ml$) of normal group was not accorded that of hyperthyroidism with Amerlex $FT_{4}$ RIA kit, and was higher than that of hypothyroidism. 2. $FT_{4}$ value was lower level in chronic-kidney disfunction syndrome whereas, it was normal in a cancer patient, a woman in pregnancy and a patient in TBG disfunction. 3. The value of this method is a good corelationship at that of equilibrium dialysis method. (r=0.931) 4. $FT_{4}$ value by this kit was linear relationship to those of the other kit (Gamma Coat and Liquisol), and the normal value of each methods was also similar. As mentioned above, this method is more simple and rapid, compared to the other method. Therefore, it was thought that this method is a very useful clinically.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3
• /
• pp.459-464
• /
• 2013

The purpose of a micro-mixing device is to enhance the mixing by increasing the diffusion effect between different types of flows. There have been many attempts to actively or passively increase mixing. However, those studies were limited to lab-scale experiments because the production of devices requires a series of processes, time, cost, and the mixing quality itself. For this reason, this study attempted to develop a quick and simple process for micro-mixing device fabrication by using conventional machining and bonding processes and applying ultrasonic waves from the outside of the mixing device. The mixing quality was quantified by using the mixing index, and the results showed that the proposed system increases the mixing from ~33% to ~10% with respect to the flow rates.

• Journal of Biosystems Engineering
• /
• v.37 no.1
• /
• pp.11-18
• /
• 2012

Purpose: Short-circuit current of a solar module that is widely used as a power source for wireless environmental sensors is proportional to solar radiation although there are a lot of factors affecting the short-circuit current. The objective of this study is to develop a model for estimating solar radiation for using the solar module as a power source and an irradiance sensor. Methods: An experiment system collected data on the short-circuit current and environmental factors (ambient temperature, cloud cover and solar radiation) during 65 days. Based on these data, two linear regression models and a non-linear regression model were developed and evaluated. Results: The best model was a linear regression model with short-circuit current, angle of incidence and cloud cover and its overall RMSE(Root Means Square Error) was 66.671 $W/m^2$. The other linear model (RMSE 69.038 $W/m^2$) was also acceptable when the cloud cover data is not available.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.4
• /
• pp.282-291
• /
• 2010

This paper presents a full-CMOS transmitter and receiver for VDSL2 systems. The transmitter part consists of the low-pass filter, programmable gain amplifier (PGA) and 14-bit DAC. The receiver part consists of the low-pass filter, variable gain amplifier (VGA), and 13-bit ADC. The low pass filter and PGA are designed to support the variable data rate. The RC bank sharing architecture for the low pass filter has reduced the chip size significantly. And, the 80 Msps, high resolution DAC and ADC are integrated to guarantee the SNR. Also, the transmitter and receiver are designed to have a wide dynamic range and gain control range because the signal from the VDSL2 line is variable depending on the distance. The chip is implemented in 0.25 ${\mu}m$ CMOS technology and the die area is 5 mm $\times$ 5 mm. The spurious free dynamic range (SFDR) and SNR of the transmitter and receiver are 67.5 dB and 41 dB, respectively. The power consumption of the transmitter and receiver are 160 mW and 250 mW from the supply voltage of 2.5 V, respectively.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.5
• /
• pp.703-711
• /
• 2013

In this paper, we have proposed high power generator with Induction Voltage Adder of three cells. IVA which has n cells can generate n-th times high power pulse, is a more stable system than Marx generator in the view of breakdown. We applied amorphous metal magnetic cores as an energy storing material for IVA rather than ferrite cores because of their higher magnetic flux swing to make it more compact system and the loss of it was also considered in the design. For driving the IVA, we design Blumlein pulse generators which are filled with pure water for high dielectric constant and high breakdown field strength, and triggered by single Marx generator. We have presented the PSPICE simulation and its test result.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.5 s.122
• /
• pp.373-378
• /
• 2007

Today, the use of the sound absorptive material is increasing to improve the room acoustics in the auditorium and music hall, etc. Usually, the sound absorption materials have been used to enhance the performance of a noise barrier and improve the room acoustics in construction site. Generally, the sound absorbtion coefficients are the most important factor reflecting the sound absorbtion performance. There are two methods to measure the sound absorption coefficient. The first one is the reverberation room method, and the second is the impedance tube method. In this study, we measure the sound absorbtion coefficients using these two methods, and then we compared the results of the sound absorbtion coefficients to look into the difference of results between reverberation room method and impedance tube method. Also we compared the results of the sound absorbtion coefficients with respect to the size of sample and the volume of reverberation room. From the experiment, we could see that the sound absorbtion coefficients are measured equally for different sample size. But the sound absorbtion coefficients are measured differently according to test methods and test conditions.