• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.147-149
• /
• 2002

Recently, the study on development of electrical and electronic device is done to set miniature, high degrees of integration and efficiency by using inorganic materials the study of Langmuir-Boldgett(LB) method that uses organic materials because of the limitation for the ultrasmall size. The structure of MIM(Metal-Insulator-Metal) device is Cr-Au/PBLG/ Al. the number of accumulated layers are 1, 3, 5, 7, 9. The I-V characteristic of the device is measured from 0[V] to 2[V] and the characteristic of current-time of the devices. We have investigated the capacitance because PBLG system have a accumulated layers the maximum value of measured current is increased as the number of accumulated layers are decreased. The capacitor properties of a thin film is better as the distance between electrodes is smaller. The results have shown the insulating materials and could control the conductivity by accumulated layers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05a
• /
• pp.38-42
• /
• 2001

To observe the Langmuir films, displacement current measuring system(Nippon Laser & Electronics), $\pi-A$ isotherms measuring device, and Brewster Angle Microscope(BAM) were used. As results, for 8A5H, big tilt angle changes of many molecules were detected before liquid expanded phase when the monolayer was compressed and expanded by barrier. Also many small and bright points were detected by BAM when the displacement current radically changed. In $\pi$-A isotherms, surface pressure of 8A5H was radically decreased between 35 and 40[mN/m] and monolayer was assumed to be collapsed in solid condensed phase, since large bright domain was observed without change of displacement current and this bright boundary was not classified part of domain in BAM image. If we observe behaviors of molecules on the water surface in these three measurement at the same time, we can get more precise informations on L films and it could be good data for fabricating LB films.

• Macromolecular Research
• /
• v.16 no.4
• /
• pp.373-378
• /
• 2008

A simple chemical fixation method for the fabrication of layer-by-layer (LbL) polyelectrolyte multilayer (PEM) has been developed to create a large area, highly uniform film for various applications. PEM of weak poly-electrolytes, i.e., polyallylamine hydrogen chloride (PAH) and poly(acrylic acid)(PAA), was assembled on polymer substrates such as poly(methyl methacrylate)(PMMA) and polycarbonate (PC). In the case of a weak polyelectrolyte, the fabricated thin film thickness of the polyelectrolyte multilayers was strongly dependent on the pH of the processing solution, which enabled the film thickness or optical properties to be controlled. On the other hand, the environmental stability for device application was poor. In this study, we utilized the chemical fixation method using glutaraldehyde (GA)-amine reaction in order to stabilize the polyelectrolyte multilayers. By simple treatment of GA on the PEM film, the inherent morphology was fixed and the adhesion and mechanical strength were improved. Both surface tension and FT-IR measurements supported the chemical cross-linking reaction. The surface property of the polyelectrolyte films was altered and converted from hydrophilic to hydrophobic by chemical modification. The possible application to antireflection coating on PMMA and PC was demonstrated.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.1
• /
• pp.29-36
• /
• 2007

The xynA gene encoding the xylanase A of Paenibacillus sp. DG-22 was isolated with a DNA probe obtained by PCR amplification, using degenerated primers deduced from the amino acid residues of the known N-terminal region of the purified enzyme and the conserved region in the family 11 xylanases. The positive clones were screened on the LB agar plates supplemented with xylan, by the Congo-red staining method. The xynA gene consists of a 630-bp open reading frame encoding a protein of 210 amino acids, and the XynA preprotein contains a 28-residues signal peptide whose cleavage yields a l82-residues mature protein of a calculated molecular weight of 20,000Da and pI value of 8.77. The cloned DNA fragment also has another ORF of 873 nucleotides that showed 76% identity to the putative transcriptional activator of Bacillus halodurans C-125. Most of the xylanase activity was found in the periplasmic space of E. coli. The xynA gene was subcloned into pQE60 expression vector to fuse with six histidine-tag. The recombinant xylanase A was purified by heating and immobilized metal affinity chromatography. The optimum pH and temperature of the purified enzyme were 6.0 and $60^{\circ}C$, respectively. This histidine-tagged xylanase A was less thermostable than the native enzyme.

• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.556-560
• /
• 2017

A hemoglobin/silver nanoparticle heterolayer was fabricated for bioelectronic device with electrochemical signal-enhancement effect. As a device element, a hemoglobin, the metalloprotein, contained the heme group that showed the redox property was introduced for charge storage element. For electron transfer facilitation, a silver nanoparticle was introduced for electrochemical signal facilitation, the hemoglobin was immobilized onto Au substrate using chemical linker 6-mercaptohexanoic acid (6-MHA). Then, the silver nanoparticle was immobilized onto fabricated hemoglobin/6-MHA heterolayers by layer-by-layer (LbL) method. The surface morphology and surface roughness of fabricated heterolayer were investigated by atomic force microscopy (AFM). The redox property of hemoglobin/silver nanoparticle heterolayer was investigated by a cyclic voltammetry (CV) experiment for obtaining an oxidation potential and reduction potential. Moreover, for the assessing charge storage function, a chronoamperometry (CA) experiment was conducted to hemoglobin/silver nanoparticle-modified heterolayer electrode using oxidation and reduction potentials, respectively. Based on the results, the fabricated hemoglobin/silver nanoparticle heterolayer showed that an increased charge storage effect compared to hemoglobin monolayer-modified electrode.

• KSBB Journal
• /
• v.25 no.2
• /
• pp.123-129
• /
• 2010

An endospore-forming, rod-shaped bacterium was isolated from forest soil samples collected at the Taebaek mountain of Gangwon province, Korea, and taxonomically characterized by physiological, biochemical and phylogenetic methods. Its 16S rRNA sequences showed the maximum similarity of 97% with B. amyloliquefaciens. In addition, the isolate BCNU 2002 was determined to have the ability to produce enzymes such as amylase, protease, gelatinase and catalase. The in vitro antifungal activity of Bacillus sp. BCNU 2002 was also examined against human pathogenic fungi such as Aspergillus niger, Candida albicans, Epidermophyton floccosum, Saccharomyces cerevisiae, Trichophyton mentagrophytes and Trichophyton rubrum. A maximum production level of antifungal substances of Bacillus sp. BCNU 2002 was achieved under aerobic incubation at $28^{\circ}C$ for 7 days in LB broth. BCNU 2002 showed strong antifungal activities against T. mentagrophytes and T. rubrum with the range of percentage inhibition from 56.25 to 63.23%. It was also confirmed that ethylacetate extract of cultured broth showed a strong antifungal activity against A. niger, C. albicans, S. cerevisiae and T. rubrum by agar diffusion method. The peptide fraction also exhibited broad antifungal spectrum against various pathogenic fungi. The minimum inhibitory concentration values for active extracts ranged between 125 ${\mu}g$/mL and 1000 ${\mu}g$/mL.

• Journal of Life Science
• /
• v.31 no.8
• /
• pp.761-770
• /
• 2021

In this study, the optimal medium composition for enhancing protease production was established by the Bacillus strain isolated from Makgeolli, a traditional fermented food, using the response surface methodology. B. amyloliquefaciens SRCM115785 was selected as the protease producer by productivity analysis and identified by 16S rRNA gene sequencing. Plackett-Burman design (PBD) was introduced to analyze the effect of each component on protease production among the 11 selected medium components. As a result, glucose, yeast extract, and beef extract were finally selected as factors for enhancing protease production. Central composite design (CCD) analysis was designed as a method to determine the optimal concentration of each component for protease production and the concentration of each medium composition for maximum protease production was predicted to glucose 6.75 g/l, yeast extract 12.42 g/l and beef extract 17.48 g/l. The suitability of the experimental model was proved using ANOVA analysis and as a result of quantitative analysis to prove this, the amount of increase was 230.47% compared to the LB medium used as a control. Through this study, the optimization of medium composition for enhancing protease production was established, and based on this, it is expected that it can be efficient use of protease as an industrial enzyme.

• Korean journal of applied entomology
• /
• v.57 no.4
• /
• pp.393-399
• /
• 2018

A loop-mediated isothermal amplification (LAMP) primer set (WBPH-65) was designed for the species-specific detection of white-backed planthopper (WBPH) Sogatella furcifera based on the full-length sequence of the internal transcribed spacer 2 (ITS2) (KC417469.1). The WBPH-65 primer set consists of six primers (total 165 bp), F3 (18 bp), B3 (18 bp), FIP (43 bp), BIP (40 bp), LF (21 bp), and LB (25 bp). After the LAMP reaction of three rice planthoppers, S. furcifera, Nilaparvata lugens, and Laodelphax striatellus, with the WBPH-65 primer set for 60 min at $65^{\circ}C$, the LAMP products were observed in the genomic DNA of S. furcifera only. According to the DNA amount of S. furcifera and incubation duration at $65^{\circ}C$, the difference of fluorescence relative to the negative control (0 ng) was clearly observed in a 40-min incubation with 10 and 100 ng or in case of 60-min incubation with 0.01, 0.1, 1, 10, and 100 ng. There was little difference in fluorescence between the negative control and all the other DNAs tested in 20- and 30-min incubations. On the other hand, the WBPH-65 primer set without LF and LB primers showed little amplification in the genomic DNAs of the three rice planthoppers, S. furcifera, N. lugens, and L. striatellus in a 60-min incubation. These results suggest that all six primers (F3, B3, FIP, BIP, LF, and BF) are necessary for the WBPH-65 primer set to detect S. furcifera within a 60-min incubation, and is able to discriminate S. furcifera from at least N. lugens and L. striatellus.

• Elastomers and Composites
• /
• v.43 no.4
• /
• pp.264-270
• /
• 2008

$\alpha$-D-mannosyl fullerene[$C_{60}$]-functionalized gold nanoparticle films were selfassembled using the layer-by-layer method on the reactive of glass slides functionlized with 3-aminopropyltrimethoxysilane. The functionalized glass slides were alternately soaked in the solutions containing $\alpha$-D-mannosyl fullerene[$C_{60}$] and 4-aminothiophenoxide/hexanethiolate-protected gold nanoparticles. $\alpha$-D-mannosyl fullerene[$C_{60}$]-functionalized gold nanoparticle films have grown up to 5 layers depending on the immersion time. The self-assembled nanoparticle films were characterized using UV-vis spectroscopy showed that the surface plasmon band of gold at 530 nm gradually became more evident as successive layers were added to the films.

• Journal of Applied Biological Chemistry
• /
• v.52 no.1
• /
• pp.1-7
• /
• 2009

For the development of qualitative PCR detection method of genetically modified (CM) rice, rice species-specific gene, OsCc-1 (rice cytochrome c gene), was selected as suitable far use as an endogenous gene in rice. The primer pair OsCytC-5'/3'with 111 bp amplicon was used for PCR amplification of the rice endogenous gene, OsCc-1 and no amplified product was observed from 8 different crops as templates. Qualitative PCR method was carried out with stack traits of L528$\times$CryIAc1 GM rice developed in Korea. For the qualitative PCRs, some primer pairs were designed with a construct-specific and event-specific type based on T-DNA and junction sequences of T-DNA in GM rice. Actck-5'/3' amplifying between actin promoter and OsCK1 gene introduced in LS28 gave rise to an amplicon 306 bp; also, CrLB-5'/3' from CryIAcl and CKRB-5'/3'amplifying the junction region of T-DNA and genome sequence from LS28 as event-specific primers gave rise to an amplicon 142 bp and 91 bp, respectively. These primer pairs for the detection of event-specific targets not produced PCR amplicons on non-CM rice and various crops in contrast to event lines. Therefore, in this study we verified that event-specific primers were effective to specifically detect stack trait lines and demonstrated that this method presented could be provided with the detection-method data for risk assessment analysis of GM rice to be commercialized.