• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.92-95
• /
• 2016

In this paper, an UHF-band 1 kW solid-state pulsed power amplifier was designed and implemented for the thermoacoustic imaging(TAI) at 900 MHz. The designed power amplifier has a pulse width of $80{\mu}s$ and a duty cycle of 1 % for short-pulse operation. The overall amplifier was implemented by combining of 16 single-power amplifiers adopting MRFE6P9220HR3 LDMOSFET using wilkinson power dividers. The solid-state pulsed power amplifier shows 25 % drain efficiency with a gain of 76.2 dB when the output power is 60.2 dBm for a -16 dBm input power at center frequency.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.7-12
• /
• 2008

In this paper, a highly efficiency power amplifier is presented for multi-band antenna system. The class F power amplifier operating in dual-band designed with one LDMOSFET. An operating frequency of power amplifier is 900 MHz and 2.14 GHz respectively Matching networks and harmonic control circuits of amplifier are designed by using the unit cell of composite right/left-handed(CRLH) transmission line(TL) realized with lumped elements. The CRLH TL can lead to metamaterial transmission line with the dual-band holing capability. The dual-band operation of the CRLH TL is achieved by the frequency offset and the nonlinear phase slope of the CRLH TL for the matching network of the power amplifier. Because the control of all harmonic components for high efficiency is very difficult, we have controled only the second- and third-harmonics to obtain the high efficiency with the CRLH TL. Also, the proposed power amplifier has been realized by using the harmonic control circuit for not only the output matching network, but also the input matching network for better efficiency.

• ETRI Journal
• /
• v.36 no.5
• /
• pp.829-834
• /
• 2014

In this paper, a lateral power metal-oxide-semiconductor field-effect transistor with ultra-low specific on-resistance is proposed to be applied to a high-voltage (up to 200 V) integrated chip. The proposed structure has two characteristics. Firstly, a high level of drift doping concentration can be kept because a tilt-implanted p-drift layer assists in the full depletion of the n-drift region. Secondly, charge imbalance is avoided by an extended trench gate, which suppresses the trench corner effect occurring in the n-drift region and helps achieve a high breakdown voltage (BV). Compared to a conventional trench gate, the simulation result shows a 37.5% decrease in $R_{on.sp}$ and a 16% improvement in BV.

• Proceedings of the KAIS Fall Conference
• /
• 2002.11a
• /
• pp.197-200
• /
• 2002

본 논문에서는 IMT-2000용 AB급 대전력 증폭기를 설계 및 제작하였다. 전력증폭기의 주파수 대역은 IMT-2000용 순방향 주파수인 2110MHz-2170MHz에서 AB급으로 동작하도록 하였고, 고효율성과 우수한 선형성 소자인 LDMOSFET를 사용하였다. 설계 특성에 맞는 최적부하를 찾아 마이크로 스트립 회로로 입력 및 출력 정합 회로를 구현하였다 임피던스 정합 방법으로는 소자를 실제 측정상태에서 입력단과 출력단에 튜너를 삽입하고 기본 주파수에서 최대 출력상태를 만족하는 임피던스를 튜너로 구현한 후, 튜너를 제거하고 튜너의 입력 임피던스를 Network Analyzer로 측정하여 최적 부하 임피던스를 추출하는 로드풀 방법을 사용하였다. 대전력 증폭기의 측정결과로는 2-톤 인가시 40.57dBm의 출력결과를 얻을 수 있었고 30.61dBc의 상호 혼변조 특성을 확인하였으며, 원신호의 하모닉(Hamonic) 주파수 성분과는 21.46dBc의 차이를 보였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2004.08a
• /
• pp.23-26
• /
• 2004

본 논문은 전력증폭기의 효율을 개선하기 위한 도허티증폭기의 특성 분석에 관한 것이다. 도허티증폭기의 특성을 분석하기 위해 2-tone신호와 WCDMA신호를 사용하였고 180W PEP LDMOSFET을 사용하였다. 제작된 도허티증폭기는 출력 전력 20W에서 약 10%정도의 효율개선을 나타냈지만 선형성이 저하되는 특성을 나타내었다. 저하된 선형성을 개선시키기 위해 carrier 증폭기(Amp. A)와 peaking 증폭기(Amp. B)를 각각 변화하였으며, carrier 증폭기는 높은 PEP(Peak Envelope Power)와 적은 Id(drain current)가 되도록 하였고, peaking 증폭기는 높은 이득과, 낮은 gate bias에서 IMD(Intermodulation Distortion)가 상쇄되도록 하였다. 최종 측정 결과 출력전력 20W에서 선형성은 class AB증폭기와 비교하여 유사한 결과를 얻었으며, 효율은 약 10% 이상의 개선을 얻을 수 있었다.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.217-220
• /
• 2002

In this paper, we have investigated electronical chara-cteristics of power LDMOSFETS having different ex-tended gate lengths(1.B${\mu}{\textrm}{m}$, 2.4${\mu}{\textrm}{m}$, 3.O${\mu}{\textrm}{m}$) in the temperature range of 300k-500K. The results of this study indicate that on-resistance, breakdown voltage increase with temperature. and drain current, threshold voltage, transconductance decrease with temperature. Particular the facts, we observed that Le is the more increase, on-resistance is the more decrease. because every conditions are fixed normal states, only change the Le. As a result, Ron/BV, known for a figure of merit of power device, increase with temperature.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.8
• /
• pp.53-59
• /
• 2008

In this paper, a novel dual-band high-efficiency class-F power amplifier using the composite right/left-handed (CRLH) transmission lines (TLs) has been realized with one RF Si lateral diffusion metal-oxide-semiconductor field effect transistor (LDMOSFET). The CRLH TL can lead to metamaterial transmission line with the dual-band tuning capability. The dual-band operation of the CRLH TL is achieved by the frequency offset and the nonlinear phase slope of the CRLH TL for the matching network of the power amplifier. Because the control of the all harmonic components is very difficult in dual-band, we have managed only the second- and third-harmonics to obtain the high efficiency with the CRLH TL in dual-band. Also, the proposed power amplifier has been realized by using the harmonic control circuit for not only the output matching network, but also the input matching network for better efficiency. Two operating frequencies are chosen at 880 MHz and 1920 MHz in this work. The measured results show that the output power of 39.83 dBm and 35.17 dBm was obtained at 880 MHz and 1920 MHz, respectively. At this point, we have obtained the power-added efficiency (PAE) of 79.536 % and 44.04 % at two operation frequencies, respectively.

• Journal of electromagnetic engineering and science
• /
• v.9 no.3
• /
• pp.152-158
• /
• 2009

We have developed a novel digital feedback predistortion(DFBPD) linearization based on RF feedback PD for the wide bandwidth modulated signals. The wideband PD operation is carried out by combining the DFBPD and memory lookup table(LUT). To experimentally demonstrate the linearization performance of the proposed PD technique for wideband signal, a class-AB amplifier using an LDMOSFET MRF6S23140 with 140-W peak envelope power is employed at 2.345 GHz. For a forward-link 2FA wideband code-division multiple-access signal with 10 MHz carrier spacing, the proposed DFBPD with memory LUT delivers the adjacent channel leakage ratio at an 10 MHz offset of -56.8 dBc, while those of the amplifier with and without DFBPD are -43.2 dBc and -41.9 dBc, respectively, at an average output power of 40 dBm. The experimental result shows that the new DFBPD with memory LUT provides a good linearization performance for the signal with wide bandwidth.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.3
• /
• pp.99-104
• /
• 2002

lateral insulated gate bipolar transistors(LIGBTs) are extensively used in high voltage power IC application due to their low forward voltage drops. One of the main disadvantages of the LIGBT is its scow switching speed when compared to the LDMOSFET. And the LIGBT with reverse channel structure is lower current capability than the conventional LIGBT at the forward conduction mode. In this paper, the LIGBT which included p+ ring and p-channel gate is presented at the reverie channel structure. The presented LIGBT structure is proposed to suppress the latch up, efficiently and to improve the turn off time. It is shown to improve the current capability too. It is verified 2-D simulator, MEDICI. It is shown that the latch up current of new LIGBT is 10 times than that of the conventional LIGBT Additionally, it is shown that the turn off characteristics of the proposed LIGBT is i times than that of the conventional LIGBT. It is net presented the tail current of turn off characteristics at the proposed structure. And the presented LIGBT is not n+ buffer layer because it includes p channel gate and p+ ring.

• Journal of electromagnetic engineering and science
• /
• v.7 no.4
• /
• pp.147-153
• /
• 2007

This paper represents an analog predistortion linearizer for the high power amplifier with low memory effect. The high power amplifier is implemented using a 90-W peak envelope power(PEP) LDMOSFET at 2.14-GHz and an envelope short matching topology is applied at the active ports to minimize the memory effect. The analog predistortion circuit comprises the fundamental path and the cuber and quintic generating circuits, whose amplitudes and phases can be controlled independently. The predistortion circuit is tested for two-tone and wide-band code division multiple access(WCDMA) 4FA signals. For the WCDMA signal, the adjacent channel leakage ratios(ACLRs) at 5 MHz offset are improved by 12.4 dB at average output powers of 36 dBm and 42 dBm.