Electrical Characteristics of Novel LIGBT with p Channel Gate and p+ Ring at Reverse Channel Structure

p+링과 p 채널 게이트를 갖는 역채널 LIGBT의 전기적인 특성

  • Published : 2002.03.01

Abstract

lateral insulated gate bipolar transistors(LIGBTs) are extensively used in high voltage power IC application due to their low forward voltage drops. One of the main disadvantages of the LIGBT is its scow switching speed when compared to the LDMOSFET. And the LIGBT with reverse channel structure is lower current capability than the conventional LIGBT at the forward conduction mode. In this paper, the LIGBT which included p+ ring and p-channel gate is presented at the reverie channel structure. The presented LIGBT structure is proposed to suppress the latch up, efficiently and to improve the turn off time. It is shown to improve the current capability too. It is verified 2-D simulator, MEDICI. It is shown that the latch up current of new LIGBT is 10 times than that of the conventional LIGBT Additionally, it is shown that the turn off characteristics of the proposed LIGBT is i times than that of the conventional LIGBT. It is net presented the tail current of turn off characteristics at the proposed structure. And the presented LIGBT is not n+ buffer layer because it includes p channel gate and p+ ring.

Keywords

References

  1. B. J. Baliga, 'Power Semiconductor Devices', PWS Publishing Company, 1996
  2. B. J. Baliga, 'Trends in Power Semiconductor Devices', proc. of IEEE, vol. 43, No. 10, pp. 1717-1731, 1996 https://doi.org/10.1109/16.536818
  3. S. K. Ghandi, 'Semiconductor Power Device', New York : John Wiley and sons, pp. 46-50, 1977
  4. B. K. Bose, 'Power Electronics-A Technology Review', proc. of IEEE, vol. 76, No. 8, pp. 1303-1334, 1992 https://doi.org/10.1109/5.158603
  5. P. L. Hower, 'Power Semiconductor Devices : An Overview', proc. of IEEE, vol. 76, No. 4, pp. 335-342, 1988 https://doi.org/10.1109/5.4420
  6. Hirofumi Akagi, 'The State of the Art of Power Electronics in Japan', IEEE Trans. on Power Electronics, vol. 13, No. 2, pp. 345-356, 1998 https://doi.org/10.1109/63.662853
  7. M. R Simpson, 'Analysis of Negative Differential Resistance in the I-V Characteristics of Shorted-Anode LIGBT's', IEEE Trans. Electron Devices, Vol. 38, No. 7, July, 1991 https://doi.org/10.1109/16.85160
  8. A. Bhalla, 'Effect of IGBT Switching Dynamics on Loss Calculations in High Speed Applications', IEEE Electron Device Letters, vol. 20, No. 1, pp. 51-53, 1999 10.1109/55.737571
  9. M. Saggio, 'Innovative Localized Lifetime Control in High-Speed IGBT's', IEEE Electron Device Letters, vol. 18, No. 7, pp. 333-335, 1997 https://doi.org/10.1109/55.596928
  10. B. J. Baliga, 'Comparison of Gold, Platinum, and Electron Irradiation for Controlling Lifetime in Power Rectifiers', IEEE Trans. Electron Devices, Vol. 24, No. 6, June, 1977 https://doi.org/10.1109/T-ED.1977.18803
  11. Ettore Napoli, 'Numerical Analysis of Local Lifetime Control for High-Speed Low-Loss P-i-N Diode Design', IEEE Trans. Power Electronic, Vol. 14, No. 4, pp. 615-621, July, 1999 https://doi.org/10.1109/63.774197
  12. V. Rainera, 'Voids in Silicon Power Devices', Solid-State Electronics, vol. 42, No. 12, pp. 2295-2301, 1998 https://doi.org/10.1016/S0038-1101(98)00228-7
  13. TMA MEDICI : Two-Dimensional Device Simulation Program, Technology Modeling Associate, Inc., 1993
  14. D. Disney, 'Fast Switching LIGBT Devices Fabricated in SOI Substrates', proc. of ISPSD 92, pp. 48-51, 1992
  15. D. S. Kuo, 'Modeling the Turn off Characteristics of the Bipolar-MOS Transistor', IEEE Trans. Electron Devices, vol. EDL-6, No. 5, pp. 211-214, 1985 https://doi.org/10.1109/EDL.1985.26101
  16. B. J. Baliga, 'Fast Switching Insulated Gate Transistor', IEEE Trans. Electron Devices Letters, vol. EDL-4, No. 12, pp. 452-454, 1983 https://doi.org/10.1109/EDL.1983.25799
  17. L. Sahesan, 'Simulation of Transient Turn-off Characteristics of a Trench Emitter Insulated Gate Bipolar Transistor (IGBT)', proc. 20th International conference on microelectronics, vol. 2, pp. 697-700, 1995 https://doi.org/10.1109/ICMEL.1995.500951