• 제목/요약/키워드: L-band erbium doped fiber amplifier

검색결과 13건 처리시간 0.022초

Investigation of Amplifying Mechanism in an t-Band Erbium-Doped Fiber Amplifier Pumped by a 980 nm Pump

  • Lee, Dong-Han;Lee, Han-Hyub;Oh, Jung-Mi;Kim, Byung-Jun
    • Journal of the Optical Society of Korea
    • /
    • 제7권2호
    • /
    • pp.67-71
    • /
    • 2003
  • For a more detailed understanding of the mechanism of an L-band erbium-doped fiber amplifier, we investigated 980 nm absorption, signal amplification and forward and backward amplified spontaneous emission along the erbium-doped fiber. In addition, we compared performances of the erbium-doped fiber amplifier with and without a fiber Bragg grating.

장거리 광선로 감시용 1625 nm OTDR 신호 증폭을 위한 효율적인 Extended L-band Erbium-doped Fiber Amplifier (An Extended L-band Erbium-doped Fiber Amplifier to Amplify 1625 nm OTDR Signal for a Long Distance Monitoring System)

  • 이한협;서대동;이동한;최현범;전정우
    • 한국광학회지
    • /
    • 제16권5호
    • /
    • pp.411-416
    • /
    • 2005
  • Optical Time Domain Reflectometry를 이용하여 수백 km 이상의 장거리 광통신망을 감시하기 위해서는 감시광을 증폭시켜야한다. 본 논문에서는 1625 nm OTDR 감시광을 증폭시키기 위해 fiber Bragg grating과 band pass filter를 이용하여 이득과 잡음지수를 각각 5.1 dB 그리고 0.9 dB 향상시킨 2단 구조의 Extended L-band EDFA를 제안하였다. 제안된 Extended L-band EDFA의 1625 nm 대역의 신호 이득은 16.3 dB이고 잡음지수는 7.1 dB였다.

50 GHz 채널 간격의 64 채널 광신호 전송을 위한 L-band EDFA의 구조 최적화 (Structure optimization of a L-band erbium-doped fiber amplifier for 64 optical signal channels of 50 GHz channel spacing)

  • 최보훈
    • 한국정보통신학회논문지
    • /
    • 제26권11호
    • /
    • pp.1666-1671
    • /
    • 2022
  • 채널 간격이 50 GHz 인 64 채널 파장분할 다중화 광신호를 위한 고출력 이득 평탄화된 L-band 광증폭기의 구조가 최적화되고 이 증폭기의 출력 특성이 측정되었다. 1570 nm 에서 1600 nm 사이에서 그리고 -2 dBm 입력조건 하에서, 최적화된 이단증폭기는 1 dB 오차 내에서 파장에 따른 평탄화된 이득을 가지며 이득 값은 20 dB 였다. 잡음지수는 6 dB 이내로 최소화 되었다. 추가적인 소자의 도움 없이 EDF 의 특성만을 고려하여 이득평탄화가 구현되었다. 증폭기는 2단 증폭단으로 구성되며 각 증폭단은 EDFA 구조를 기본으로 하였다. 각 단에서 EDF의 길이와 펌핑 구조들이 실험을 통해 최적화 되었다.

Design of Hybrid Optical Amplifiers for High Capacity Optical Transmission

  • Kim, Seung-Kwan;Chang, Sun-Hyok;Han, Jin-Soo;Chu, Moo-Jung
    • ETRI Journal
    • /
    • 제24권2호
    • /
    • pp.81-96
    • /
    • 2002
  • This paper describes our design of a hybrid amplifier composed of a distributed Raman amplifier and erbium-doped fiber amplifiers for C- and L-bands. We characterize the distributed Raman amplifier by numerical simulation based on the experimentally measured Raman gain coefficient of an ordinary single mode fiber transmission line. In single channel amplification, the crosstalk caused by double Rayleigh scattering was independent of signal input power and simply given as a function of the Raman gain. The double Rayleigh scattering induced power penalty was less than 0.1 dB after 1000 km if the on-off Raman gain was below 21 dB. For multiple channel amplification, using commercially available pump laser diodes and fiber components, we determined and optimized the conditions of three-wavelength Raman pumping for an amplification bandwidth of 32 nm for C-band and 34 nm for L-band. After analyzing the conventional erbium-doped fiber amplifier analysis in C-band, we estimated the performance of the hybrid amplifier for long haul optical transmission. Compared with erbium-doped fiber amplifiers, the optical signal-to-noise ratio was calculated to be higher by more than 3 dB in the optical link using the designed hybrid amplifier.

  • PDF

L 대역 EDFA 특성의 펌프 파장 의존성에 관한 연구 (Investigation of Pump Wavelength Dependence of Long-Wavelength-Band Erbium-Doped Fiber Amplifier using 1530nm-Band Pump)

  • 최보훈
    • 한국정보통신학회논문지
    • /
    • 제12권7호
    • /
    • pp.1249-1255
    • /
    • 2008
  • 1530nm 파장 대역이 L밴드 (long-wavelength-band) EDFA(erbium-doped fiber amplifler)를 위한 펌프 파장으로 연구되었다. 이 펌프 광원은 파장 가변 광원과 직렬 연결된 C 밴드 (conventional-band) EDFA로 제작되었다. 이 L밴드 EDFA는 순방향 펌핑 구조를 사용하였다. 1530nm 대역 내에서 1545nm 펌프 파장을 사용하였을 때 0.454B/mW 이득 계수를 얻었는데 이는 기존에 사용되는 1480nm 파장으로 펌핑 하였을 경우보다 2배 이상 높은 수치이다. 1530nm 파장 펌핑의 잡음지수는 가장 좋지 않은 경우가 6.36dB였는데 이는 1480nm 펌핑보다 0.75dB 높은 값이다. 제안된 펌핑 파장을 이용하는 L밴드 EDFA에서 얻은 이 같은 골은 이득 계수는 이 L밴드 EDFA가 전력 소모를 적게 한다는 것을 의미한다.

Performances of Erbium-Doped Fiber Amplifier Using 1530nm-Band Pump for Long Wavelength Multichannel Amplification

  • Choi, Bo-Hun;Chu, Moo-Jung;Park, Hyo-Hoon;Lee, Jong-Hyun
    • ETRI Journal
    • /
    • 제23권1호
    • /
    • pp.1-8
    • /
    • 2001
  • The performance of a long wavelength-band erbium-doped fiber amplifier (L-band EDFA) using 1530nm-band pumping has been studied. A 1530nm-band pump source is built using a tunable light source and two C-band EDFAs in cascaded configuration, which is able to deliver a maximum output power of 23dBm. Gain coefficient and noise figure (NF) of the L-band EDFA are measured for pump wavelengths between 1530nm and 1560nm. The gain coefficient with a 1545nm pump is more than twice as large as with a 1480nm pump. It indicates that the L-band EDFA consumes low power. The noise figure of 1530nm pump is 6.36dB at worst, which is 0.75dB higher than that of 1480nm pumped EDFA. The optimum pump wavelength range to obtain high gain and low NF in the 1530nm band appears to be between 1530nm and 1540nm. Gain spectra as a function of a pump wavelength have bandwidth of more than 10nm so that a broadband pump source can be used as 1530nm-band pump. The L-band EDFA is also tested for WDM signals. Flat Gain bandwidth is 32nm from 1571.5 to 1603.5nm within 1dB excursion at input signal of -10dBm/ch. These results demonstrate that 1530nm-band pump can be used as a new efficient pump source for L-band EDFAs.

  • PDF

L-band EDFA 에서의 온도에 따른 이득 변화와 가변 감쇄기를 이용한 온도 보상 (A compensation method for a temperature-dependent gain tilt in L-band EDFA using a voltage-controlled attenuator)

  • 이원경;정희상;주무정
    • 한국광학회지
    • /
    • 제14권1호
    • /
    • pp.12-16
    • /
    • 2003
  • $0^{\circ}C$에서 5$0^{\circ}C$까지 온도를 변화시켜 가며 100 GHz의 채널 간격으로 L-band 40채널을 운용했을 때, 온도에 따른 L-band EDFA의 출력 스펙트럼 변화와 이득 변동폭을 측정하였다. 이득 포화 영역에서의 이득의 변화로 인한 출력 스펙트럼의 변화는 온도에 따른 출력 스펙트럼의 변화와 상반되는 점을 이용하여 1단과 2단 사이에 삽입한 가변 감쇄기를 조절하여 온도에 따른 이득 변동을 보상하였다. 그 결과, $0^{\circ}C$에서 최대 3 dB까지 차이를 보이던 이득 변동 폭은 가변 감쇄기를 이용한 온도 보상으로 1 dB 이내로 줄어듦을 볼 수 있었다.

Simulation and Experimental Validation of Gain-Control Parallel Hybrid Fiber Amplifier

  • Ali, Mudhafar Hussein;Abdullah, Fairuz;Jamaludin, Md. Zaini;Al-Mansoori, Mohammed Hayder;Al-Mashhadani, Thamer Fahad;Abass, Abdulla Khudiar
    • Journal of the Optical Society of Korea
    • /
    • 제18권6호
    • /
    • pp.657-662
    • /
    • 2014
  • We demonstrate a simulation of a parallel hybrid fiber amplifier in the C+L-band with a gain controlling technique. A variable optical coupler is used to control the input signal power for both EDFA and RFA branches. The gain spectra of the C+L-band are flattened by optimizing the coupling ratio of the input signal power. In order to enhance the pump conversion efficiency, the EDFA branch was pumped by the residual Raman pump power. A gain bandwidth of 60 nm from 1530 nm to 1590 nm is obtained with large input signal power less than -5 dBm. The gain variation is about 1.06 dB at a small input signal power of -30 dBm, and it is reduced to 0.77 dB at the large input signal power of -5 dBm. The experimental results show close agreement with the simulation results.

10 Gbit/s 128 채널 고밀도 파장다중화 신호를 위해 EDFA와 라만 증폭기를 이용한 320km 광전송 실험 (320km Optical Transmission using EDFA and Raman amplifier for 10Gbit/s 128 Channel DWDM Signals)

  • 최보훈
    • 한국통신학회논문지
    • /
    • 제34권6B호
    • /
    • pp.568-574
    • /
    • 2009
  • 128 채널 고밀도 파장다중화 광신호들을 위한 320km 광전송 링크가 시뮬레이션으로 계산되고 실험으로 구현되었다. 이 링크에서 사용된 광섬유 증폭기은 분산형 라만 증폭기와 C 대역과 L 대역을 함께 증폭시킬 수 있는 이중 대역 EDFA가 함께 고려되어 컴퓨터 시뮬레이션을 통해 링크의 특성이 계산되었다. 여기서 계산된 값을 구현할 수 있도록 증폭기의 구조가 최적화되고 이 구조가 모듈로 제작되었다. 제작된 증폭기를 사용하여 구현된 링크에서 측정된 320km 거리에서의 광신호잡음비는 각 대역에서 평균 25dB였고 이는 처음 링크 계산 시에 의도된 값과 잘 일치하였다.

1.6 Tb/s (160x10 Gb/s) WDM 신호의 단일 모드 광섬유 2,000 km 전송 (1.6 Tb/s (160x10 Gb/s) WDM Transmission over 2,000 km of Single Mode Fiber)

  • 한진수;장순혁;이현재
    • 한국통신학회논문지
    • /
    • 제29권7A호
    • /
    • pp.712-718
    • /
    • 2004
  • 분산형 라만 광증폭기와 어븀 첨가 광섬유 증폭기로 구성된 복합형 광증폭기를 사용하여 1.6 Tb/s (160${\times}$10 Gb/s) 전송 용량의 WDM 광신호를 단일 모드 광섬유 2,000 km에 전송한 결과에 대하여 기술한다. 복합형 광 증폭기를 사용하여 단일 모드 광섬유 2,000 km에 전송한 뒤의 평균 광 신호대 잡음비는 C/L-band에서 각각 20.5 dB, 21.9 dB 였고, 최저 Q-factor는 C/L-band에서 각각 14.65 dB(BER=5.8E-8), 13.75 dB(BER= 5.0E-7)였다. 이 결과에 Reed-Solomon (255, 239) Forward Error Correction(FEC) 코드 기능을 사용하여 무오류 전송 결과를 얻었다.