• 제목/요약/키워드: L-Mode

검색결과 1,515건 처리시간 0.029초

RDS를 의한 Cu(110)와 산소가 흡착된 Cu(110) 표면에 Cu의 성장 모드 (The Growth Mode of Cu Atoms on Cu(110) and Oxygen-covered Cu(110) Surfaces by Reflectance Difference Spectroscopy)

  • 김상현
    • 한국진공학회지
    • /
    • 제15권1호
    • /
    • pp.45-49
    • /
    • 2006
  • 깨끗한 Cu(110)와 산소가 흡착된 Cu(110) 표면에 Cu 성장에 의한 광학적 이방성의 변화를 RDS를 이용하여 연구하였다. 250K에서 Cu를 성장하면서 성장 모드와 산소의 계면활성제 효과를 확인하였다. 두 표면에 Cu를 성장하면서 4,25eV 봉우리의 규칙적인 변화를 확인하여 layer-by-layer 모드를 확인하였다.

PWM 스위칭 기법에 의한 유도전동기 구동시스템의 전도노이즈 저감 (Conducted EMI reduction of Induction Motor Drive System by PWM Switching Technique)

  • 김흥주;이원철;김이훈;원충연;최세완;김규식;정동효
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2004년도 전력전자학술대회 논문집(2)
    • /
    • pp.769-773
    • /
    • 2004
  • Conventional SVPWM method has null switching vectors. Null switching vectors cause high common-mode voltage in induction motor drive system. The newly developed common mode voltage reduction PWM technique don't use zero switching state for inverter control. It is realized by changing software without additional hardware. Simulation and experimental results show that proposed method are reduced common mode voltage more than conventional method.

  • PDF

기생소자 효과를 이용한 이동 단말기용 광대역 헬리컬 안테나 연구 (A Study on a Wideband Helical Antenna for Mobile Handset using Parasitic Element Effect)

  • 성원모;양묘근;전용승;이치우;박진희;최학근
    • 한국전자파학회논문지
    • /
    • 제14권9호
    • /
    • pp.899-903
    • /
    • 2003
  • 본 논문에서는 기생소자 효과를 이용한 이동단말기용 광대역 안테나를 연구하였다. 기생소자에 관한 효과를 관찰하기 위해 기생소자는 급전이 되지 않는 원통형 도체를 사용하였다. 원통 도체의 외경이 증가함에 따라 두 번째, 세 번째 공진 주파수 특성이 급격히 변함을 알 수 있었다. 4.5 w의 외경을 가지는 원통형 도체 기생소자가 삽입된 경우 normal mode 헬리컬 안테나는 반사손실 -5 dB를 기준으로 900 MHz의 밴드폭을 얻었다.

틸팅차량용 탄소섬유직물/에폭시 복합재의 모우드 II 층간파괴인성 평가 (Evaluation of Mode II Interlaminar Fracture Toughness for Carbon Fabric/Epoxy Composite for Tilting Train)

  • 이은동;윤성호;신광복;정종철
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2004년도 추계학술발표대회 논문집
    • /
    • pp.189-192
    • /
    • 2004
  • In this study, mode II interlaminar fracture phenomena of carbon fabric/epoxy composite for tilting train were investigated. The end notched flexural specimen containing an artificial crack with the thickness of 12.5fl11l was used. The mode II interlaminar fracture toughness was evaluated through a three point bending test and the fractured surfaces were examined through a scanning electron microscope. The experimental results obtained in this study would be applicable in the design and structural analysis of the composite structures.

  • PDF

MOCVD를 이용한 GaAs/AlGaAs GRIN-SCH 양자 우물 레이저의 제작 및 특성 (Fabrication and Characteristics of GaAs/AlGaAs GRIN-SCH Quantum Well Laser Diode by MOCVD)

  • 손정환
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 1991년도 제6회 파동 및 레이저 학술발표회 Prodeedings of 6th Conference on Waves and Lasers
    • /
    • pp.139-143
    • /
    • 1991
  • GRIN-SCH quantum well structured Laser Diode were fabricated using MOCVD and operated as CW at room temperature. The threshold current density of the LD with 670${\mu}{\textrm}{m}$ cavity length was 530 A/$\textrm{cm}^2$. For the ridge waveguide type index guiding structured LD with 6${\mu}{\textrm}{m}$ stripe width and 240${\mu}{\textrm}{m}$ cavity length, the threshold current was 50㎃. The maximum differential quantum efficiency was 0.95W/A when the optical output was 60mW. The lasing wavelength of QW LD was 865nm. In the L-I measurement. TE mode was superior to TM mode. From the near field pattern, single lateral mode operation was observed.

  • PDF

콜레스테릭 액정 폴리머 박막을 이용한 광섬유 원편광 거울 제작 및 이를 이용한 모드 록킹 된 광섬유 레이저 (Fiber optic circular polarizing mirror using polymer cholesteric liquid crystal and it's application in the mode-locked fiber laser)

  • 장도일;김경헌;김인선;김성태
    • 한국광학회지
    • /
    • 제11권2호
    • /
    • pp.91-96
    • /
    • 2000
  • 콜레스테릭 액정 플리머 박막을 이용한 새로운 개념의 광섬유 원편광 거울을 제작하고 그 특성을 분석하였다. 콜레스테릭 액정 거울의 광학적 특성을 보여주는 Jones Matrix를 유도하고 실험을 통하여 검증하였다. 제작된 광섬유 원편광 거울은 선형 광섬유 레이저 공진기에서 공간적 홀버닝을 제거하는데 사용 될 수 있으며, 광섬유 내에서의 비선형 편광 변화 효과를 이용한 모드록킹 동작을 얻을 수 있다. 실험을 통해 얻은 모드 록킹 된 레이저의 펄스 폭은 630fs로 측정 되었다.

  • PDF

Self-Oscillating, Third-Harmonic Mode-Locked l-GHz Nd:YLF Laser

  • Yu, Tae-Jun;Sung, Jai-Hee;Nam, Chang-Hee
    • Journal of the Optical Society of Korea
    • /
    • 제3권2호
    • /
    • pp.51-54
    • /
    • 1999
  • A Nd:YLF laser has been actively mode-locked at the third-order harmonic cavity frequency using a lithium niobate phase modulator. Self-oscillating pulses of 14 ps duration, 1 GHz repetition rate, and 10mV average power at 1053 nm wavelength have been obtained. A 1GHz rf signal to drive a phase modulator was obtained by using 1GHz pulse train without rf synthesizer as a driver of an active mode locker.

온칩 DC-DC 변환기를 위한 전류 비교 방식의 센서 (A Sensing Scheme Utilizing Current-Mode Comparison for On-Chip DC-DC Converter)

  • 김형일;송하선;김범수;김대정
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2006년도 하계종합학술대회
    • /
    • pp.529-530
    • /
    • 2006
  • An efficient sensing scheme adoptable in DC-DC converter is described. The output voltage of the whole DC-DC converter is fed back to the input voltage of the sensor. The comparison in the sensor is accomplished by a current push-pull action. With a fixed reference, the comparator can be embodied based on (W/L) ratios. The current-mode scheme benefits the system better than a conventional voltage-mode one in terms of small area, low power consumption.

  • PDF

Effects of Imperfect Sinusoidal Input Currents on the Performance of a Boost PFC Pre-Regulator

  • Cheung, Martin K.H.;Chow, Martin H.L.;Lai, Y.M.;Loo, K.H.
    • Journal of Power Electronics
    • /
    • 제12권5호
    • /
    • pp.689-698
    • /
    • 2012
  • This paper investigates the effects of applying different input current waveshapes on the performance of a continuous-conduction-mode (CCM) power-factor-correction (PFC) boost pre-regulator. It is found that the output voltage ripple of the pre-regulator can be reduced if the input current is modified to include controlled amount of higher order harmonics. This finding allows us to balance the performance of output regulation and the harmonic current emission when coming to the design of the pre-regulator. An experimental PFC boost pre-regulator prototype is constructed to verify the analysis and show the benefit of the pre-regulator operating with input current containing higher order harmonics.

Optimum culture conditions of cell growth and polysaccharide production by Paecilomyces japonicain batch culture

  • 박석재;변학규;한대석;홍억기
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
    • /
    • pp.287-290
    • /
    • 2000
  • 회분배양에서 교반속도와 통기량에 대한 영향을 살펴본 결과 400 rpm과 1.0 vvm의 조건에서 균체량은 25.1 g/L, 다당체는 2.5 g/L로 가장 높게 생성되었다. 회분배양을 기초로 균체량과 다당체 생성을 높이기 위해 glucose를 대수기에 공급한 결과 배양 6일째 균체량은 29,2 g/L, 다당체 생성은 3.3 g/L로 회분배양보다 우수한 결과를 보였다.

  • PDF