• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.63-64
• /
• 2009

The TFTs have been fabricated with 3 different geometry SID electrodes which have the same channel W/L ratio (W/L = 5) due to constant channel resistance, The 3 samples have different channel widths (350, 150, and $25\;{\mu}m$) and channel lengths (70, 30, and $5\;{\mu}m$) by fixed channel W/L ratio simultaneously on one chip for reliable comparisons. Resultant on-current and field effect mobility are proportional to the channel width, while the subthreshold swing is inversely proportional to the channel width mainly due to the change of contact resistance. These results show that the contact resistance strongly affects the device performances and should be considered in the applications.

• 한국전기전자재료학회논문지
• /
• 제22권9호
• /
• pp.747-750
• /
• 2009

The TFTs have been fabricated with 3 different geometry SID electrodes which have the same channel W/L ratio (W/L = 5) due to constant channel resistance, The 3 samples have different channel widths (350, 150, and 25 ${\mu}m$) and channel lengths (70, 30, and 5 ${\mu}m$) by fixed channel W/L ratio simultaneously on one chip for reliable comparisons. Resultant on-current and field effect mobility are proportional to the channel width, while the subthreshold swing is inversely proportional to the channel width mainly due to the change of contact resistance. These results show that the contact resistance strongly affects the device performances and should be considered in the applications.

• 한국농공학회지
• /
• 제18권2호
• /
• pp.4096-4104
• /
• 1976

This experiment was carried out to investigate the efficient turning method which will be able to use every cutting methods, to calculate the width of the center field which must transpose from rotary cutting method to return cutting method, to investigate the effects of L/W and unit field on the operation efficiency. The results are summarized as follows: 1. In case of cutting in the outer field, the efficient turning method is the "$\alpha$" type turning method (half U-shaped turning method) at the first rotation, is the "$\beta$" type turning method (T-shaped turning method) at the second to fourth rotation. 2. In case of cutting in the inner field, the efficient turning method which takes the least turning time is the "a" type turning method ($\Delta$-shaped turning method). 3. The width of the center field (W') changes by the length-width ratio (L/W) and width (W), W' is 9.0m in case that L/W is 2.5 and W is 30m. 4. The larger L/W and area of unit field (A) become, the more operation efficiency (E) increases, and the limits that E is affected signicantly by L/W is 2 to 3.5 and A is within 5,000$m^2$. within 5,000$m^2$.

• 폴리머
• /
• 제29권1호
• /
• pp.69-73
• /
• 2005

비바이러스성 유전자 전달체의 주요 단점인 낮은 transfection 효율에 기인한 반복투여 등을 극복하기 위하여 poly (D,L-lactide-co-glycolide)를 이용하여 DNA가 봉입된 미립구를 제조하였다. pDNA 그 자체 또는 여러 비율의 키토산/pDNA 복합체를 사용하여 봉입하였고, 그 결과 44%(pDNA 그 자체), 5%(0.7:1 미토산/pDNA 복합체), 그리고 8%(1:1 키토산/pDNA 복합체)의 봉입효율을 나타내었다. 주사전자현미경(SEM)을 통해 본 표면구조에서는 미립구 제조 직후에서는 매우 매끈한 구형을 보이다가 제조 후 41일 경에는 찌그러진 다공성의 구조를 보였는데 이는 미립구 제조에 사용한 poly(D,L-lactic-co-glycolic acid)(PLGA) 고분자의 분해에 의한 것으로 생각된다. 시험관내 방출실험에서는 0.7:1 키토산/pDNA 복합체를 사용한 미립구에서 47%의 pDNA가 26일만에 방출된데 반해, pDNA 그 자체 혹은 1:1 키토산/pDNA 복합체를 사용한 미립구에서는 각각 15% 혹은 32%의 pDNA 방출을 나타내었다.

• 대한기계학회논문집
• /
• 제4권3호
• /
• pp.113-118
• /
• 1980

Stresses were calculated for finite-width orthotropic laminates with a circular hole and remote uniaxial loading using a two-dimensional finite-element analysis with both uniform stress and uniform displacement boundary conditions. Five different laminates were analyzed: quasi-isotropic [0.deg./.+-.45.deg./90.deg.].$\_$s/, 0.deg., 90.deg., [0.deg./90.deg.]$\_$s/, and [.+-.45.deg.]$\_$s/, Computed results are presented for selected combinations of hole diameter-sheet-width ratio d/w and length-to width ratio L/w. For small L/w values, the stress-concentration factors K$\_$tn/ were significantly different for the uniform stress and uniform displacement boundary conditions. Typically, for the uniform stress conditions, the K$\_$tn/ values were much larger than for the infinite-strip reference conditions; however, for the uniform displacement conditon, they were only slighty smaller than for this reference. The results for long strips are also presented as width-correction factor. For d/w.leg.33, these width-correction factors are nearly equal for all five laminates.

• 대한기계학회논문집
• /
• 제13권4호
• /
• pp.625-635
• /
• 1989

본 논문에서는 이 방법을 사용하여 glass/epoxy와 graphite/epoxy 유한평판이 균일응력과 균일변위 경계조건을 받을 때 평판 종횡비 H/W를 1,2,3, 균열길이와 폭의 비 L/W를 0.1부터 0.7까지, 균열각도를 0, 30, 45, 60으로 변화 시키면서 응력강도수정계수를 구하려고 한다.

• 설비공학논문집
• /
• 제14권9호
• /
• pp.725-733
• /
• 2002

In this study, the heat transport limitations of a two-phase closed thermosyphon were investigated. For the test, a two-phase closed thermosyphon ($L_t/: 600 mm,\;L_e:105mm,\;L_a:75mm,\;L_c:420mm,\;D_o:22.2mm,$ container: copper (inner grooved surface), working fluid: PFC ($C_6F_14$) was fabricated with a reservoir that can change the fill charge ratio. The following was imposed as the factors on the heat transport limitations of a two-phase closed thermosyphon. 1) Fill charge ratio of the working fluid. 2) Tilt angle of the longitudinal axis. From tile experimental data, some results were obtained as follows. When the fill charge ratio was relatively small ($\psi$20%), the heat transport limitation occurred about 100W by dry-out limitation. However over 40%, it shelved nearly constant value (500 W) by flooding limitation. The heat transport limitation according to the tilt angle increased smoothly until the tilt angle was $60^{\circ}$,/TEX>, after then decreased slowly.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2004년도 International Conference Global Environmental Problems and their Health Consequences
• /
• pp.207-209
• /
• 2004

This study was performed to estimate the effects of salinity and washing of food wastes on temperature, pH, and salinity in aerobic composting of food wastes. Weight ratios of food wastes to water in washing were 1:0(Control), 1:1(W-1), 1:2(W-2), 1:3(W-3) and 1:4(W-4), respectively. Ratios of food wastes to wood chips in reactor of Control, W-1, W-2, W-3 and W-4 were 5kg:5L, respectively. Reactors were operated for 24 days with 1 hour stirring by 1 rpm and 2 hours aeration per day. The increase in the ratio of food wastes to water used in washing resulted in the decrease of the highest reaction temperature and the elongation of the high temperature reaction period. The lowering of the ratio of food wastes to water used in washing resulted in faster pH increase The final salinities of Control, W-1, W-2, W-3 and W-4 were 0.95%, 0.73%, 0.65%, 0.57% and 0.41%, respectively.

• 한국수산과학회지
• /
• 제3권4호
• /
• pp.219-227
• /
• 1970

1. 거제도 동쪽 연안의 보리새우 어장에서는 5월부터 10월까지 어획이 되고 있으나 성어기는 6월과 9월에 두번 이루어지고 있다. 2. 능포 지선에 출현하는 보리새우 암컷의 두흉갑장의 모오드는 5월에는 $51\~55mm$, 6월에는 $51\~60mm$,의 것이 약 $80\%$를 차지하게 되며, 7월에는 현저한 모오드는 보이기 않고 $41\~50mm$의 소형의 것이 출현하기 시작하고, 8월에는 $46\~50mm$의 것이 모오드를 나타내고 있었다. 3. 수컷의 두흉갑장의 모오드는 5월에는 $41\~45mm$, 6월에는 $46\~50mm$, 7, 8월에는 다시 $41\~45mm$의 것이 나타내고 있었다. 4. 본종은 봄과 가을에 출현하는 2개의 계통군으로 나누어지는 것으로 볼 수 있으나 일부의 군은 혼입되는 것으르 추측된다. 5. 5월에서 8월까지 능포 지선에서 출현하는 보리새우의 성비는 암컷 33, 수컷 67정도였다. 6. 본종의 두흉갑장($\iota$)과 체장(L) 및 체중(Wg)과의 관계는 5월산이 $L=2.9418{\iota}+2.0166$, $W=1.449{\iota}^{2.2858}$, 6월 산이 $L=2.5551{\iota}+4.2986$, $W=1.528{\iota}^{2.2595}$, 7월산이 $L=2.6738{\iota}+3.4037$, $W=1.341{\iota}^{2.3593}$의 식으로 표시되었고 6월산이 5, 7월산에 비하여 두흉갑장에 대한 체장과 체중의 증가가 공히 완만한 편이었다. 7, 5, 6, 7월산 어미 새우의 두흉갑장과 난소, 중량(W)과의 관계는 $W=2.695\times10^{-3}\iota^{4.2973}$의 식으로 표시되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1477-1478
• /
• 2011

Solution processed zinc tin oxide (ZTO) thin films were studied using a spin coating for the fabrication of thin film transistors and simple circuits. The solution processed thin film transistors (W/L = 100/10 ${\mu}m$) have the average saturation mobility of 1.9 $cm^2$/Vs, threshold voltage of 20 V, and subthreshold slope of 0.5 V/decade. The dc characteristics of an inverter with $W_{load}=100\;{\mu}m$ and $W_{drive}=10\;{\mu}m$, measured under votage supply of $V_{DD}$ = +50 V. The inverter beta ratio is 20 ($R=(W_{drived}/L_{drive})/(W_{load}/L_{load})=20$) and $gain_{max}$ is 2. The characteristics of an oscillator were measured under voltage supply of $V_{DD}$ = +60 V.