• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.3
• /
• pp.249-257
• /
• 2007

State of problem : The use of zirconium oxide all-ceramic material provides several advantages, including a high flexural strength(>1000MPa) and desirable optical properties, such as shading adaptation to the basic shades and a reduction in the layer thickness. Along with the strength of the materials, the cementation technique is also important to the clinical success of a restoration. Nevertheless, little information is available on the effect of different surface treatments on the bonding of zirconium high-crystalline ceramics and resin luting agents. Purpose : The aim of this study was to test the effects of surface treatments of zirconium on shear bond strengths between bovine teeth and a zirconia ceramic and evaluate differences among cements Material and methods : 54 sound bovine teeth extracted within a 1 months, were used. They were frozen in distilled water. These were rinsed by tap water to confirm that no granulation tissues have left. These were kept refrigerated at $4^{\circ}C$ until tested. Each tooth was placed horizontally at a plastic cylinder (diameter 20mm), and embedded in epoxy resin. Teeth were sectioned with diamond burs to expose dentin and grinded with #600 silicon carbide paper. To make sure there was no enamel left, each was observed under an optical microscope. 54 prefabricated zirconium oxide ceramic copings(Lava, 3M ESPE, USA) were assigned into 3 groups ; control, airborne-abraded with $110{\mu}m$ $Al_2O_3$ and scratched with diamond burs at 4 directions. They were cemented with a seating force of 10 ㎏ per tooth, using resin luting cement(Panavia $F^{(R)}$), resin cement(Superbond $C&B^{(R)}$), and resin modified GI cement(Rely X $Luting^{(R)}$). Those were thermocycled at $5^{\circ}C$ and $55^{\circ}C$ for 5000 cycles with a 30 second dwell time, and then shear bond strength was determined in a universal test machine(Model 4200, Instron Co., Canton, USA). The crosshead speed was 1 mm/min. The result was analyzed with one-way analysis of variance(ANOVA) and the Tukey test at a significance level of P<0.05. Results : Superbond $C&B^{(R)}$ at scratching with diamond burs showed the highest shear bond strength than others (p<.05). For Panavia $F^{(R)}$, groups of scratching and sandblasting showed significantly higher shear bond strength than control group(p<.05). For Rely X $Luting^{(R)}$, only between scratching & control group, significantly different shear bond strength was observed(p<.05). Conclusion : Within the limitation of this study, Superbond $C&B^{(R)}$ showed clinically acceptable shear bond between bovine teeth & zirconia ceramics regardless of surface treatments. For the surface treatment, scratching increased shear bond strength. Increase of shear bond strength by sandblasting with $110{\mu}m$ $Al_2O_3$ was not statistically different.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.1
• /
• pp.5-10
• /
• 2012

In general, the fabrications of the LEDs with mesa structure are performed grown by MOCVD method. In order to etch and separate each chips, the LEDs are passed the RIE and scribing processes. The RIE process using plasma dry etching occur some problems such as defects, dislocations and the formation of dangling bond in surface result in decline of device characteristic. The SAG method has attracted considerable interest for the growth of high quality GaN epi layer on the sapphire substrate. In this paper, the SAG method was introduced for simplification and fabrication of the high quality epi layer. And we report that the size of selective area do not affect the characteristics of original LED. The diameter of SAG circle patterns were choose as 2500, 1000, 350, and 200 ${\mu}m$. The SAG-LEDs were measured to obtain the device characteristics using by SEM, EL and I-V. The main emission peaks of 2500, 1000, 350, and 200 ${\mu}m$ were 485, 480, 450, and 445 nm respectively. The chips of 350, 200 ${\mu}m$ diameter were observed non-uniform surface and resistance was higher than original LED, however, the chips of 2500, 1000 ${\mu}m$ diameter had uniform surface and current-voltage characteristics were better than small sizes. Therefore, we suggest that the suitable diameter which do not affect the characteristic of original LED is more than 1000 ${\mu}m$.

• Journal of Korean Home Economics Education Association
• /
• v.16 no.3
• /
• pp.1-25
• /
• 2004

This study analyzes the external forms of the household textbooks and also the contents of them used at girls' middleㆍhigh schools during the period of Japanese ruling over Korea. To this end, 8 household textbooks published from 1928 to 1937 were analyzed. The results of the study are summarized as follows. 1. The household subject had become the one of the most important subjects to girl students as the practical uses were emphasized in educational area during the period. As a result. the classes of the household were the second in hours, following the class of Japanese (the national language) to girl students. 2. The contents of the household textbooks were intended to contain 'the modern' and 'the newest'. The students were also suggested to apply the contents of the textbooks to real home life. Many pictures, photos and illustrations were included in household textbooks to help students to understand the contents of the subject. 3. The purposes of the household class were the reformation of the living conditions and home economics. 4. The external characteristics of the household textbooks during the period were as follows. - Written in Japanese vertically and the size of the textbook was A5 (150/210) with pulp paper of good quality - The type style of the body of the textbooks was Ming-style type- The sequent order of the textbooks was the outer cover, the title page, pictorial, introduction, table of contents, the body, appendix and the back cover. 5. The household textbooks consisted of the first volume and the second volume. The first volume contained clothing and textiles, food and nutrition and housing. Taking care of the aged. nursing. child care, household economy and home management were included in the second volume. 6. The household textbooks were designed to make women the housewives.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2009

In the past decade, we have observed rapid advances in the development of biochips in many fields including medical and environmental monitoring. Biochip experiments involve immobilizing a ligand on a solid substrate surface, and monitoring its interaction with an analyte in a sample solution. Metal nanoparticles can display extinction bands on their surfaces. These charge density oscillations are simply known as the localized surface plasmon resonance (LSPR). The high sensitivity of LSPR has been utilized to design biochips for the label-free detection of biomolecular interactions with various ligands. LSPR-based optical biochips and biosensors are easy to fabricate, and the apparatus cost for the evaluation of optical characteristics is lower than that for the conventional surface plasmon resonance apparatus. Furthermore, the operation procedure has become more convenient as it does not require labeling procedure. In this paper, we review the recent advances in LSPR research and also describe the LSPR-based optical biosensor constructed with a core-shell dielectric nanoparticle biochip for its application to label-free biomolecular detections such as antigen-antibody interaction.

• KDI Journal of Economic Policy
• /
• v.13 no.2
• /
• pp.141-161
• /
• 1991

Resale price maintenance has long been employed in book distribution, perhaps longer than for any other product. Another unusual practice in the book trade that has proven to be quite durable in spite of its substantial cost in real resources is the returns policy. Publishers typically grant the right to return unsold books within a stipulated time for full credit against future orders. This paper investigates the functions and effects of resale price maintenance in the book trade, and argues that resale price maintenance and returns are substitute methods of providing the same economic function. Resale price maintenance can be used to compensate booksellers for initially stocking books with uncertain prospects and for providing a conduit through which manufacturers acquire information about consumer demand (market testing services). Permitting the return of unsold books for full credit places a floor under retail prices and transfers a considerable portion of the cost of introducing a new product line back to the publisher. Both reflect publishers' needs to have their books displayed. In the U.S. returns privileges were first proposed in 1913, roughly coincident with the Macy decision outlawing RPM. Publishers slowly granted return privileges, which become nearly universal by 1970. The decline in margins in recent years has been accompanied by an increase in returns as the return policy served to substitute for lost margins on successful titles as a methods of compensating full-line booksellers. In contrast, returns privileges are unusual in countries where price maintenance in books has been practiced. These observations are consistent with our analysis. In Korea, resale price maintenance of books is practiced under an exception to Korean antitrust law. The availability of effective price maintenance is likely to reduce the use of returns programs. Since consumers prefer to obtain books at outlets where they know the books are likely to be stocked rather than taking a chance on stores that carry a more limited line, it also provides a strong incentive for booksellers to expand. But the privilege of resale price maintenance should be confined to books which publishers want to be price maintained. Resale price maintenance and returns system differ in the transactions costs associated with inventory holding, and publishers' judgement on the comparative advantage of the two schemes should be honored. Publishers should also remain free to authorize sales at discount at any time not to impair the ability of booksellers to dispose of product variants that prove unpopular.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.408-412
• /
• 2018

In this paper, a 26GHz variable gain amplifier fabricated using a 40nm CMOS process is studied. In the case of an automobile radar using 79 GHz, it is advantageous in designing and driving to drive down to a low frequency band or to use a low frequency band before up conversion rather than designing and matching the entire circuit to 79 GHz in terms of frequency characteristics. In the case of a Phased Array System that uses time delay through TTD (True Time Delay) in practice, down conversion to a lower frequency is advantageous in realizing a real time delay and reducing errors. For a VGA (Variable Gain Amplifier) operating in the 26GHz frequency band that is 1/3 of the frequency of 79GHz, VDD : 1V, Bias 0.95V, S11 is designed to be <-9.8dB (Mea. High gain mode) and S22 < (Mea. high gain mode), Gain: 2.69dB (Mea. high gain mode), and P1dB: -15 dBm (Mea. high gain mode). In low gain mode, S11 is <-3.3dB (Mea. Low gain mode), S22 <-8.6dB (Mea. low gain mode), Gain: 0dB (Mea. low gain mode), P1dB: -21dBm (Mea. Low gain mode).

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1461-1464
• /
• 2019

In this paper, we propose the development of embedded board for integrated radiation exposure protection fireman's life-saving alarm capable of location tracking and radiation measurement. The proposed techniques consist of signal processing unit, communication unit, power unit, main control unit. Signal processing units apply shielding design, noise reduction technology and electromagnetic wave subtraction technology. The communication unit is designed to communicate using the wifi method. In the main control unit, power consumption is reduced to a minimum, and a high performance system is formed through small, high density and low heat generation. The proposed techniques are equipment operated by exposure to poor conditions, such as disaster and fire sites, so they are designed and manufactured for external appearance considering waterproof and thermal endurance. The proposed techniques were tested by an authorized testing agency to determine the effectiveness of embedded board. The waterproof grade has achieved the IP67 rating, which can maintain stable performance even when flooded with water at the disaster site due to the nature of the fireman's equipment. The operating temperature was measured in the range of -10℃ to 50℃ to cope with a wide range of environmental changes at the disaster site. The battery life was measured to be available 144 hours after a single charge to cope with emergency disasters such as a collapse accident. The maximum communication distance, including the PCB, was measured to operate at 54.2 meters, a range wider than the existing 50 meters, at a straight line with the command-and-control vehicle in the event of a disaster. Therefore, the effectiveness of embedded board for embedded board for integrated radiation exposure protection fireman's life-saving alarm has been demonstrated.

• Journal of Radiation Protection and Research
• /
• v.38 no.2
• /
• pp.106-118
• /
• 2013

In this paper, we analyzed the Cognition of irradiated food and its relation with self-efficacy. The most important variables described behaviors based on health choices compared with the choice to choose irradiated food items. According to the survey, 33.1% of respondents said that the reason why irradiated food is considered to be a health risk is because "radiation is dangerous". 27.9% of respondents answered that "eating irradiated food is like eating a radioactive substance", 21.1% said radiated food is comparable to a "genetic variation in food" while 10.1% said "food goes bad during the irradiation process". On this basis, it is reasonable to conclude that respondents have a misunderstanding of irradiated food without reference to the general theory of irradiated knowledge. In this respect, it would be helpful to provide education showing that irradiated food is not related to eating harmful or genetically modified food to help high school students create informed opinions of irradiated food. In terms of relevance with health-specific self-efficacy, experience of acquiring information about irradiated food was marked at r=0.148 (p<0.01), experience of purchasing irradiated food was marked at r=0.077 (p<0.05), experience of eating irradiated food was marked at r=0.113 (p<0.01) while knowledge of irradiated food, attitude towards irradiated food and behavior was marked at r=0.103 (p<0.01), r=0.076 (p<0.05) and r=0.105 (p<0.01) respectively. This shows that self-efficacy is high when one has experience of acquiring information about irradiated food, purchasing or eating irradiated food resulting in a high level of knowledge, attitude and behavior. Education which serves to improve the level of self-efficacy needs to be provided along with an educational program which will increase the public's understanding of irradiated food. It is expected that if this education which increases the level of self-efficacy is provided together with correct information of irradiated food, behavior to choose and eat irradiated food will also improve.

• Culinary science and hospitality research
• /
• v.22 no.2
• /
• pp.115-124
• /
• 2016

The purpose of this paper is to verify improvement of the basic quality of food resources and make the pork legs as the more advanced food products after taking special processing steps with the mixture of traditional medical herbs and hot water extracted coffee meal. The pH level of the pettitoes(Jokbal) showed the highest rate among the control group but it showed no statistical differences in the moisture content between the control and the pettitoes(Jokbal) processed with coffee waste extract as an additional component. In addition, the levels of crude fat and crude ash showed slight increases as the addition of the amount increase. In case of the proteins, however, tendency of slight was decreased but it was not significantly difference as the amount increases. The sodium rate in the pettitoes(Jokbal) was higher in the additional group than in the control group. Texture analysis showed a tendency of wide decrease in the hardness and chewiness depending on amount of the added coffee waste extract. On the other hand, as for the cohesiveness and springiness, there was no significant difference with the control group. In case of the lightness value, as the amount of added coffee waste extract is increased from 10% to 20% and 30%, the 'L' value was reduced significantly compared to that of the control. And the 'a' value was not significantly different compared to the coffee waste extract foil impregnated furniture control. But the 'b' values were significantly increased in accordance with the result of increasing the amount of control is at the lowest level. The result may come from the influence of coffee waste extract, which affects the color of the pettitoes(Jokbal). According to the sensory evaluation, the pork part with 10% of coffee waste extract showed the highest score in looking, chewiness, smell and preference, resulting in the improvement in quality of the pettitoes(Jokbal).

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.3
• /
• pp.151-208
• /
• 2020

Japan's two outer space-related laws were promulgated on November 16, 2016. There are the Act on Launching of Spacecraft, etc. and Control of Spacecraft (Act No. 76 of 2016, Space Activities Act) and the Act on Securing Proper Handling of Satellite Remote Sensing Records (Act No.77 of 2016, Remote Sensing Records Act). Japan's Space Activities Act states that a person who launches a satellite from the territory of Japan, or from a ship or airplane registered in Japan, must obtain permission from the Prime Minister prior to the launch. To obtain the permission, the person must have a certificate for a rocket design and for radio equipment at a launching facility. In addition, the ability to launch a rocket safely and the purpose for the satellite launch must be evaluated. Managing a satellite from Japan also requires permission from the government. A person who launches a rocket must have insurance for any potential damage arising from accidents, and the government is to supplement the potential compensation to allow for damage that cannot be covered by private insurance. The purpose of this paper reviews regulations of launch services and management of satellites in the Japan's Space Activities Act. It also offers some implications and suggestions for regulations of launching of spacecraft and management or operation of satellites.