• Journal of the Korean Geotechnical Society
• /
• v.23 no.5
• /
• pp.111-129
• /
• 2007

The standard construction manual of the SDA(Separated Doughnut Auger) piling method was proposed so that the resisting capacity of the augered piles could work effectively. 405 dynamic pile load tests and 30 static pile load tests were performed for 265 test piles, which were installed by the SDA piling method in 33 sites in Korea. The results of the pile load tests showed that the end bearing capacity of the SDA augered piles depended on the property of various soil stratums and did not agree with ones estimated by the existing formula based on several standard design codes. On the basis of the pile load test results, four formulas were presented according to bearing stratums to estimate quantitatively the unit end bearing capacity of the SDA augered piles. The formulas for the unit end bearing capacity of piles on soils or weathered rocks were related to N-value given by SPT(Standard Penetration Test), while the unit end bearing capacity on bedrock was suggested to be more than 1500 $tf/m^2$. The presented formulas were compared with the existing formulas, which were presented by several standard design codes to design the augered piles. In order to use correctly the presented formulas, the quality of Standard Penetration Test should be controlled precisely. Also it is desirable to choose a pilot construction site, where both dynamic and static pile load tests are performed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.1-6
• /
• 2017

In this paper, we present a study concerning the design of a 400 N class side thruster for small ships. The side thrusters used in Korea are imported from abroad. The performance and durability of the imported products employed in Korea are not adequate, therefore the side thrusters which will be suitable for Korean domestic needs to be re-designed. The strength calculation of the side thruster was performed by KS standard. Strength calculation and design were made to meet design requirements. Structural analysis and safety factor analysis were carried out to confirm the validity of strength calculations and design. After manufacturing the bevel gear, a back lash test was conducted. We also conducted a no-load test, a rated load, and an overload test for a performance test and a durability test of the design while satisfying the design conditions.

• Journal of the Korea Furniture Society
• /
• v.20 no.6
• /
• pp.590-598
• /
• 2009

The study of Lurelle Van Arsdale Guild (1898-1986)'s vanity table and stool in the Cooper-Hewitt National Design Museum is essential to understand how the stylistic change was made on industrial design in the 1930s caused by economic necessity. The vanity furniture expresses in such relatively inexpensive image transformations that would attract new customers in the Depression. The objects are donated from a collector and became one of CHM's collections in 1997. In curatorial file, other than the designer's and manufacturer's names there is nothing specified for these objects. Therefore, this study is aimed for researching the exact date for these valuable objects for understanding American Art Deco furniture in the 1930s. Moreover, studying social aspect of these objects gives clear vision for the background. Especially, the History of American Standard (Rodengen, 1999) gives great over view to the history of the manufacturer, C. F. Church Company. The record in Fortune of 1934 suggests the designer, Lurelle Guild's position among other industrial designers at that time. And Profoundly, the objects were assigned design patents. Therefore, the vanity furniture set in the CHM was a significant symbol of early modernism rising from functional areas after the Depression.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.7
• /
• pp.566-573
• /
• 2017

A type certificate is required to ensure the safety of aircraft design. If a person is to pursue major design change to the certified aircraft, an applicant has to apply for a new type certificate, an amended type certificate, or a supplemental type certificate appropriately. Design changes to be applied for a supplemental type certificate are abstractly defined in ICAO, FAA, and EASA regulations. In this paper, authors reviewed certification procedures regarding design changes, analysed certification examples of leading countries, and presented the criteria to determine "major design changes not extensive" for a supplemental type certificate.

• Journal of the Korea Furniture Society
• /
• v.16 no.2 s.30
• /
• pp.49-57
• /
• 2005

This study purposed to grasp the Design Characteristic of the representative Furnitures produced recently by Domestic Furniture Manufacturers. As for the researching method, setting as the object of the selected 7 furniture manufacturers, through the regional classification such as living room, bedroom, dining room, and then chose again the 395 items of furnitures to be analyzed. The Design Characteristic of the chosen furnitures has been examined clearly by the analysis standard framework for those peculiarities at view of aesthetic, decorating and material. As the result of analysis, as for the aesthetic Peculiarity of the furnitures, the rectilinear form was overwhelming than the curve lined shape, and it was appeared that the brighter tone of color was used quite more. In the respect of aesthetic characteristic, the furnitures decorated with modern style is pretty gaining predominance than that of reflected style of traditional character, and since modern residential space has been maintained continuously as minimal shaped trend for several years, it could be known that such moulding and decorating peculiarities and also furniture as the composing factor of space had been selected together with it. Based on such conclusion, standing on this time point where the design trend of residential space is being changed, it is also considered that the Development of Furniture Design which copes positively with such change tendency in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2124-2130
• /
• 2014

The standard for DGPS reference station system defined by RTCM is in the current version of 1.2. This standard currently supports only GPS of the United States. However, the current operating GNSS satellite consisted of not only GPS, but also GALILEO of Europe, GLONASS of Russia, QZSS of Japan, BeiDou of China and so on. Therefore, the existing standard is not able to support them. Accordingly, a new standard in the version of RTCM's RSIM 1.3 is established in order to provide correctional services to GNSS satellites. In this paper, the version of RSIM 1.3 is analyzed and the software for DGNSS reference station architecture supporting the version of RSIM 1.3 is designed.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.2
• /
• pp.170-181
• /
• 2008

Cost of construction project have to be estimated based on drawing before execution. Cost estimate and check would be performed numerously for preparing general outline of requirements and determining the budget at conceptual planning stage, for obtaining decision on every matter related to design, specification, construction and cost at design stage, and for predicting bidding cost. Thus, importance of cost estimation cannot emphasize too much in construction. However, there are lack of standard estimation method, process, and cost analysis method, that square foot estimation method is as used as eyer, in Korea. Thus, This research present the direction for improving cost estimation and management in construction; It is demanded that establishing standard data base methodology, multi-level database model CUBE, and standard cost planning process, choosing cost estimation methodology according to objectives and cost planning process, and making more experts.

• Fire Science and Engineering
• /
• v.29 no.4
• /
• pp.26-32
• /
• 2015

Carbon dioxide principally extinguishes fires by smothering, but an acceptable amount of extinguishing agent is needed. To assure the performance of carbon dioxide systems in Korea, computer programs certified by NEMA are being applied in system design. But the design errors can occur because the geometry of a model test facility is not the same as that of the actual fire area. Since the discharge rate tends to vary considerably with the flow pattern in a pipe, an on-site discharge test is necessary to ensure the performance of the system, especially with low pressure carbon dioxide. Technical standards for carbon dioxide systems do not give detailed guidelines for discharge tests at present. Based on comparative analysis of standards and practical tests, this paper suggests a methodology for on-site discharge tests.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.701-712
• /
• 2012

The concept of $k$-shortest disjoint paths is considered important because the establishment of primary and backup forwarding paths exploiting shorter distance and faster propagation time is a dominant consideration for the design of a survivable backbone network. Therefore, we need to evaluate how well the concept of $k$-shortest disjoint paths is exploited for the design of a survivable ship backbone network considering the international standard related to ship backbone networks, the IEC61162-410 standard specifying how to manage redundant message transmissions among ship devices. Performance evaluations are conducted in terms of following objective goals: link capacity, hop and distance of primary and backup paths, even distribution of traffic flows, restoration time of backup forwarding paths, and physical network topology connectivity.

• The Journal of the Korea Contents Association
• /
• v.9 no.8
• /
• pp.18-31
• /
• 2009

Improved reliability of microarray data and its reproducibility lead to recent increment in demand of data sharing and utilization among laboratories, but house-keeping and publicly opened microarray experimental data can hardly be accessed and utilized since they are in heterogeneous formats according to the various experimental methods and microarray platforms. In this paper, we propose a microarray sharing method which can easily retrieve and integrate microarray data from different experiment platforms, data formats, normalization methods, and analysis methods. Our system is based on web-service technology. The biologists of each site are able to search UDDI(Universal Description, Discovery, and Integration) registry, and download microarray data with common data structure of standard format recommended by MGED(Microarray Gene Expression Databases) society. The common data structure defined in this paper consists of IDF(Investigation Design Format), ADF(Array Design Format), SDRF(Sample and Relationship Format), and EDF(Expression Data Format). These components play role as templates to integrate microarray data with various structure and can be stored in standard formats such as MAGE-ML, MAGE-TAB, and XML Schema. In addition, our system provides advanced tools of automatic microarray data submitter and file manager to manipulate local microarray data efficiently.