Browse > Article
http://dx.doi.org/10.14775/ksmpe.2017.16.2.001

A Study on the Design and Performance Test of Side Thruster  

Kim, Hyeong-Min (Department of Mechanical System Engineering, ERI, Gyeongsang National University)
Kim, Lae-Sung (Creative Aero-IT-Mech Convergence Eng. Education Program, Gyeongsang National University)
Cho, Sung-Hyun (Department of Mechanical System Engineering, ERI, Gyeongsang National University)
Lyu, Sung-Ki (Department of Mechanical System Engineering, ERI, Gyeongsang National University)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.16, no.2, 2017 , pp. 1-6 More about this Journal
Abstract
In this paper, we present a study concerning the design of a 400 N class side thruster for small ships. The side thrusters used in Korea are imported from abroad. The performance and durability of the imported products employed in Korea are not adequate, therefore the side thrusters which will be suitable for Korean domestic needs to be re-designed. The strength calculation of the side thruster was performed by KS standard. Strength calculation and design were made to meet design requirements. Structural analysis and safety factor analysis were carried out to confirm the validity of strength calculations and design. After manufacturing the bevel gear, a back lash test was conducted. We also conducted a no-load test, a rated load, and an overload test for a performance test and a durability test of the design while satisfying the design conditions.
Keywords
Side Thruster; Strength Calculations; Structural Analysis; Backlash Measurement; Overload Test;
Citations & Related Records
Times Cited By KSCI : 7  (Citation Analysis)
연도 인용수 순위
1 Kim, H. J., Experimental Study on Production Characteristics of Straight Bevel Gear using a Polyjet Method 3D Printer, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 63-68, 2015.   DOI
2 Jung, J. W., Kim, K. P., Ji, H. C., Tae-Sang Moon, Design Improvement of the Driving Bevel Gear in Transmissions of a Tracked Vehicle, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 1-6, 2015.   DOI
3 Kim, N. K., Bae, K. Y., Kim, N. H., Jang, J. H., Development of Jig Type Chuck for Roundness improvement in a Machining of High Stage Speed Gear, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 1, pp. 20-25, 2016.   DOI
4 Kim, H. J., Kim, Y. J., Kim, H. S., Effect of Changes in Metal Characteristics of Hot-Forged Alloy Steel on Mechanical Properties of an Automotive Automatic Transmission Gear, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 3, pp. 135-146. 2016.   DOI
5 Won, M. C., Hong, S. K., Jung, Y. H., Kim, S. Y., Son, N. S., Yoon, H. G., "A Study on a Nonlinear Control Algorithm for the Automatic Berthing of Ships," Journal of Ocean Engineering and Technology, Vol. 22, No. 3, pp. 34-40, 2008.
6 Kim, S. P., Park, J. J., Jun, D. S., Kim, Y. S., Lee, C. J., "A Development of New Device for Bow Thruster Tunnel Grids," Journal of the Society Naval Architects of Korea, Vol. 43, No. 3, pp. 304-312, 2006.   DOI
7 KST Ship Agency Standards, "Chapter 4 Section 2 Article 58, Intermediate Axis and Thrust Axis," Korea Ship Safety Technology Corporation, pp. 36-38.
8 KST Ship Agency Standards, "Chapter 4 Section 2 Article 59, Propeller Shaft and Stern Tube Shaft," Korea Ship Safety Technology Authority, pp. 38-39.
9 Pipe Business Division, Development Department, "Comparison Report for Side Thrust GRP Tunnels," Hankuk Fiber, 2016.
10 Kim, T. H., Jang, J. H., Lee, D. G., Kim, L. S., Lyu, S. K., Study on Optimal Design and Analysis of Worm Gear Reducer for High Place Operation Car, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 98-103, 2015.   DOI