• Animal Bioscience
• /
• v.35 no.6
• /
• pp.838-846
• /
• 2022

Objective: Native plants can be used as additives to replace antibiotics to improve ruminant feed utilization and animal health. An experiment was conducted to evaluate the effects of Gentiana straminea (GS) on nutrient digestibility, methane emissions, and energy metabolism of Simmental calves. Methods: Thirty-two (5-week-old) male Simmental clves, with initial body weight (BW) of 155±12 kg were fed the same basal diet of concentrates (26%), alfalfa hay (37%), and oat hay (37%) and were randomly separated into four treatment groups according to the amount of GS that was added to their basal diet. The four different groups received different amounts of GS as a supplement to their basal diet during whole experiment: (0 GS) 0 mg/kg BW, the control; (100 GS) 100 mg/kg BW; (200 GS) 200 mg/kg BW; and (300 GS) 300 mg/kg BW. Results: For calves in the 200 GS and 300 GS treatment groups, there was a significant increase in dry matter (DM) intake (p<0.01), average daily gain (ADG) (p<0.05), organic matter intake (p<0.05), DM digestibility (p<0.05), neutral detergent fibre (NDF) digestibility (p<0.05), and acid detergent fibre (ADF) digestibility (p<0.05). Dietary GS supplementation result in quadratic increases of DM intake (p<0.01), ADG (p<0.05), NDF intake (p<0.05), and ADF intake (p<0.05). Supplementing the basal diet with GS significantly increased nitrogen (N) retention (p<0.001) and the ratio of retention N to N intake (p<0.001). Supplementing the basal diet with GS significantly decreased methane (CH₄) emissions (p<0.01), CH₄/BW^0.75 (p<0.05) and CH₄ energy (CH₄-E) (p<0.05). Dietary GS supplementation result in quadratic increases of CH₄ (p<0.01) and CH₄/DM intake (p<0.01). Compared with 0 GS, GS-supplemented diets significantly improved their gross energy intake (p<0.05). The metabolizable energy and digestive energy intake were significantly greater for calves in the 100 GS and 200 GS calves than for 0 GS calves (p<0.05). Conclusion: From this study, we conclude that supplementing calf diets with GS could improve utilization of feed, energy, and N, and may reduce CH₄ emissions without having any negative effects on animal health.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.4
• /
• pp.531-540
• /
• 2022

Due to the high incidence of malignant melanoma, the establishment of in vitro models that recapitulate the tumor microenvironment is of great biological and clinical importance for tumor treatment and drug research. In this study, 3D printing technology was used to prepare GelMA/PEGDA composite scaffolds that mimic the microenvironment of human malignant melanoma cell (A375) growth and construct in vitro melanoma micro-models. The GelMA/PEGDA hybrid scaffold was tested by the mechanical property, cell live/dead assay, cell proliferation assay, cytoskeleton staining and drug loading assay. The growth of tumor cells in two- and three-dimensional culture systems and the anti-cancer effect of luteolin were evaluated using the live/dead staining method and the Cell Counting Kit-8 (CCK-8) method. The results showed a high aggregation of tumor cells on the 3D scaffold, which was suitable for long-term culture. Cytoskeleton staining and immunofluorescent protein staining were used to evaluate the degree of differentiation of tumor cells under 2D and 3D culture systems. The results indicated that 3D bioprinted scaffolds were more suitable for tumor cell expansion and differentiation, and the tumor cells were more aggressive. In addition, luteolin was time- and dose-dependent on tumor cells, and tumor cells in the 3D culture system were more resistant to the drug.

• Animal Bioscience
• /
• v.37 no.8
• /
• pp.1474-1482
• /
• 2024

Objective: The experiment aimed to determine the standardized ileal digestibility (SID) of crude protein (CP) and amino acids (AA) in 10 brown rice samples fed to pigs, and to construct predictive models for SID of CP and AA based on the physical characteristics and chemical composition of brown rice. Methods: Twenty-two cannulated pigs (initial body weight: 42.0±1.2 kg) were assigned to a replicated 11×3 incomplete Latin square design, including an N-free diet and 10 brown rice diets. Each period included 5 d adaptation and 2 d ileal digesta collection. Chromic oxide was added at 0.3% to all the diets as an indigestible marker for calculating the ileal CP and AA digestibility. Results: The coefficients of variation of all detected indices for physical characteristics and chemical composition, except for bulk weight, dry matter (DM) and gross energy, in 10 brown rice samples were greater than 10%. The SID of CP, lysine (Lys), methionine, threonine (Thr), and tryptophan (Trp) in brown rice was 77.2% (62.6% to 85.5%), 87.5% (80.3% to 94.3%), 89.2% (78.9% to 98.9%), 55.4% (46.1% to 67.6%) and 92.5% (86.3% to 96.3%), respectively. The best prediction equations for the SID of CP, Lys, Thr, and Trp were as following, SID_CP = -664.181+8.484×DM (R² = 0.40), SID_Lys = 53.126+6.031×ether extract (EE)+0.893×thousand-kernel volume (R² = 0.66), SID_Thr = 39.916+7.843×EE (R² = 0.41), and SID_Trp = -361.588+4.891×DM+0.387×total starch (R² = 0.85). Conclusion: Overall, a great variation exists among 10 sources of brown rice, and the thousand-grain volume, DM, EE, and total starch can be used as the key predictors for SID of CP and AA.

• Journal of Veterinary Science
• /
• v.22 no.5
• /
• pp.59.1-59.13
• /
• 2021

Background: Antimicrobial peptides (AMPs) have been identified as promising compounds for consideration as novel antimicrobial agents. Objectives: This study analyzed the efficacy of cecropin B against Haemophilus parasuis isolates through scanning electron microscopy (SEM) and atomic force microscopy (AFM) experiments. Results: Cecropin B exhibited broad inhibition activity against 15 standard Haemophilus parasuis (HPS) strains and 5 of the clinical isolates had minimum inhibition concentrations (MICs) ranging from 2 to 16 ㎍/mL. Microelectrophoresis and hexadecane adsorption assays indicated that the more hydrophobic and the higher the isoelectric point (IEP) of the strain, the more sensitive it was to cecropin B. Through SEM, multiple blisters of various shapes and dents on the cell surface were observed. Protrusions and leakage were detected by AFM. Conclusions: Based on the results, cecropin B could inhibit HPS via a pore-forming mechanism by interacting with the cytoplasmic membrane of bacteria. Moreover, as cecropin B concentration increased, the bacteria membrane was more seriously damaged. Thus, cecropin B could be developed as an effective anti-HPS agent for use in clinical applications.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1243-1251
• /
• 2020

Irradiation-induced damage of binderless nanoporous-isotropic graphite (NPIG) prepared by isostatic pressing of mesophase carbon microspheres for molten salt reactor was investigated by 3.0 MeV He⁺ irradiation at room temperature and high temperature of 600 ℃, and IG-110 was used as the comparation. SEM, TEM, X-ray diffraction and Raman spectrum are used to characterize the irradiation effect and the influence of temperature on graphite radiation damage. After irradiation at room temperature, the surface morphology is rougher, the increase of defect clusters makes atom flour bend, the layer spacing increases, and the catalytic graphitization phenomenon of NPIG is observed. However, the density of defects in high temperature environment decreases and other changes are not obvious. Mechanical properties also change due to changes in defects. In addition, SEM and Raman spectra of the cross section show that cracks appear in the depth range of the maximum irradiation dose, and the defect density increases with the increase of irradiation dose.

• Geomechanics and Engineering
• /
• v.32 no.4
• /
• pp.375-385
• /
• 2023

There are many joint fissures distributed in the engineering rock mass. In the process of geological history, the underground rock mass undergoes strong geological processes, and undergoes complex geological processes such as fracture breeding, expansion, recementation, and re-expansion. In this paper, the damage-stick-slip process (DSSP), an analysis model used for rock mass failure slip, was established to examine the master control and time-dependent mechanical properties of the new and primary fractures of a multi-fractured rock mass under the action of stress loading. The experimental system for the recemented multi-fractured rock mass was developed to validate the above theory. First, a rock mass failure test was conducted. Then, the failure stress state was kept constant, and the fractured rock mass was grouted and cemented. A secondary loading was applied until the grouted mass reached the intended strength to investigate the bearing capacity of the recemented multi-fractured rock mass, and an acoustic emission (AE) system was used to monitor AE events and the update of damage energy. The results show that the initial fracture angle and direction had a significant effect on the re-failure process of the cement rock mass; Compared with the monitoring results of the acoustic emission (AE) measurements, the master control surface, key blocks and other control factors in the multi-fractured rock mass were obtained; The triangular shaped block in rock mass plays an important role in the stress and displacement change of multi-fracture rock mass and the long fissure and the fractures with close fracture tip are easier to activate, and the position where the longer fractures intersect with the smaller fractures is easier to generate new fractures. The results are of great significance to a multi-block structure, which affects the safety of underground coal mining.

• Current Optics and Photonics
• /
• v.2 no.1
• /
• pp.7-14
• /
• 2018

As a sophisticated detection technology, LIDAR has been widely employed to probe low-altitude windshear. Due to the drawbacks of the traditional ramp algorithm, the alarm accuracy of the LIDAR has not been satisfactory. Aiming at settling this matter, a novel method is proposed on the basis of improved signal smoothing and second windshear detection, which essentially acts as a combination of ramp algorithm and segmentation approach, involving the human factor as well as signal fluctuations. Experiments on the real and artificial signals verify our approach.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.329-335
• /
• 2011

In this paper, a dual-band integer-N frequency divider is proposed for 2.4/5.2 GHz multi-standard wireless local area networks. It consists of a multi-modulus imbalance phase switching prescaler and two all-stage programmable counters. It is able to provide dual-band operation with high resolution while maintaining a low power consumption. This frequency divider is integrated with a 5 GHz VCO for multi-standard applications. Measurement results show that the VCO with frequency divider can work at 5.2 GHz with a total power consumption of 22 mW.

• Nano
• /
• v.13 no.12
• /
• pp.1850139.1-1850139.10
• /
• 2018

$Co_3O_4$ nanocrystals have been synthesized via an ordinary one-step calcination of a cobalt-based 2D coordination polymer [Co(tfbdc)(4,4'-bpy)$(H_2O)_2$]. As an anode material for lithium-ion batteries, the obtained $Co_3O_4$ nanocrystals exhibit high reversible capacity, excellent cyclic stability and better rate capability. The reversible capacity of the $Co_3O_4$ nanocrystals maintains $713mA\;h\;g^{-1}$ after 50 cycles at a current density of $50mA\;g^{-1}$. Our results confirm that searching for metal oxides nanomaterials used as anode materials of lithium ion batteries via the calcinations of 2D coordination polymer is a new route.

• Nano
• /
• v.13 no.10
• /
• pp.1850121.1-1850121.11
• /
• 2018

In this study, a series of $LaMnO_3$-diamond composites with varied $LaMnO_3$ mass contents supported on micro-diamond have been synthesized using a sol-gel method. The as-prepared composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy and the Fourier transform infrared spectra (FTIR). Meanwhile, the photocatalytic performances were also tested by photoluminescence (PL) spectroscopy, ultraviolet-visible diffuse reflection spectra (UV-Vis DRS) and the degradation of weak acid red C-3GN (RC-3GN). Results show that the peak position of $LaMnO_3$ is shifted to low angle after the introduction of diamond, and perovskite particles uniformly distributed on the surface of diamond, forming a network structure, which can increase the active sites and the absorption of dye molecules. When the mass ratio of $LaMnO_3$ and diamond is 1:2 (LMO-Dia-2), the composite shows the most excellent photocatalytic activity. This result offers a sample route to enlarge the range of the application of micro-diamond and provide a new carrier for perovskite photocatalysts.