• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.317-326
• /
• 2014

Slips and falls are associated with many public injuries in Korea. It is also estimated that slipping are major contributors to slip, trip and fall injury burden. The primary purpose of the present study is to determine if, and to what extent, the standard could be improved in present environment. In order to fulfill our objective, the regulations in Korea and foreign countries were investigated and reviewed. Many kind of standard, mandatory documents and guideline were also reviewed. And then, regulations, standard, guideline etc. reviewed were compared with each others. Also, some criteria was developed in this study. Standard and criteria developed in this study will help to prevent slip, trip, and fall injuries.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.279-287
• /
• 2014

The recent rise in SARS and bird flu infections around the world has raised the interest in studying the habits of air borne pathogens such as germs and viruses. In this study, simulations were carried out to predict the performance of UVGI air sterilizer at preventing airborne infections inside a car, based on the installation position and the removing effect of the UVGI air sterilizer. Simulation results showed that the UVGI air sterilizer was most effective when located at the rear side of the front seats. It was also showed that when the out-air mode and the UVGI air sterilizer were set to the highest capacity, the microbial safety levels were maintained in a car for 21 hours.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.273-277
• /
• 2014

Subcontracting business than the contracting business in shipbuilding industry is a lot of hazardous job and highly accident because of highly work intensity. In order to prevent the accidents, there is a need to analyze characteristic. of shipbuilding, to apply measures of risk assessment. In this paper, I suggested an improvement of the risk assessment through the actual condition research in shipbuilding industry. In the research method, I analysed accidents occurred until 2011-2013. Carried out the actual site survey while two weeks in May 2014. As a result, 1) The main pattern were caught-in or between, fall on the high level according to analyzed accidents. 2) To apply the weight show clear of magnitude for risk assessment. 3) Risk estimation of risk assessment is desirable to be quantization by accidents analysis, and to be greater than or equal to 4 steps.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.257-266
• /
• 2014

This study was planned to investigate the effect of the exposure to hazard factors on work environment satisfaction. Existing researches about job satisfaction have focused on the general working conditions, such as working hours, wage, human relationship, job task and so on. Korean Working Conditions Survey was used for this study because that relevant questions were included. The effect of the exposure to hazard factors on work environment satisfaction may be produced by hierarchical regression analysis because of comparison with existing model for work environment satisfaction. The exposure to hazards factors were statistically significant effect on work environment satisfaction after adjusting other confounding variables, such as gender, age, educational level, job security, work hour, work load, work autonomy, social support, etc. This study has some limitation because that KWCS was cross sectional survey. Some researches about the causal effect and its mechanism may be suggested as future study.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.249-255
• /
• 2014

The Purpose of this study is to compare occupational accident rate of unionized and non-unionized company and to investigate influences of labor relations on occupational accident rate in Korean manufacturing and construction Industry. Data in 2011 Occupational safety and Health Trend Survey were analyzed for this study. Results show that the occupational accident rate was lower in unionized company than non-unionized company. And amicable labor relationship reduces the occupational accident rate. The policy should be needed to support labor union and improve labor relationship to prevent industrial accidents.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.231-237
• /
• 2014

Construction of the external wall framing using construction Gang-Form withstand the load of a full lift safety is very important in lifting rings can be a lot of Gang-Form is now fixed in the manner that you are welding and applied, but this study is based on the safety of the lifting ring to seek improvements were bolt type fixing method applied to the bonding type were part of the lifting ring in a manner fixed to the concrete surface and was applied in consideration of safety.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.209-218
• /
• 2014

An accident related with elevators can cause death or serious injury of operators or passengers. This kind of a fatal accident is due to a failure of elevator. The reduction of failures of elevators is important to reduce the occurrence of elevator accident. Thus, this paper presents the results of analysis for the failure of elevators using the failure data of elevator. The results of analysis can be used to make a maintenance process of elevators.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.201-207
• /
• 2014

This study is aimed to improve safety of ladle in the metal products manufacturing industry. Burns may occur from spills, spatters or eruptions of hot metal from ladles during pouring or transporting. According to the statistics of occupational accidents about the ladle, many victims were exposed to or contacted with extreme temperatures. The many fatal injuries occurred as a result of unexpected discharging of molten metal due to tipping over ladles. To prevent ladles from turning over, the trunnion axis shall be located below the center of gravity of the ladle at all operating condition. For this purpose, the equation is proposed to calculate the minimum location of a trunnion axis for definite static stability when tilting.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.1-7
• /
• 2014

In this study, based on the international standard the quantitative assessment model for the level of safety, health and environment was developed. As a result of applying this model, the company(workplace) which has established improvement plan based on quantitative assessment of short-term and long-term requirements, and implemented it was acquired more higher level of safety, health and environment by more than the existing ones.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.81-88
• /
• 2014

A number of screening tools have been developed to evaluate the human balance capability. Many of them were designed to identify the elderly with falling risk. Three different screening tools, which have been well used many clinical fields, were used in this study. The purpose of this study was to evaluate balance capability in facilities maintenance workers in korea. There were no statistical significance between male and female when evaluated with three different screening tools. However, significant differences were found among the age groups irrespective of gender when evaluated with three different screening tools. The results of three different screening tools in korea showed poor values compared with previous results. These results revealed that facilities maintenance workers faced more critical falling risk in korea.