• International Journal of Highway Engineering
• /
• v.16 no.1
• /
• pp.99-109
• /
• 2014

PURPOSES : Climbing lanes on expressways managed by the Korea Expressway Corporation (KEC) have been hot potatoes due to conflicts between slow-moving vehicles such as trucks and other vehicles at the merging section as well as the less popularity with the slow-moving vehicles. In order to resolve such problems, KEC has altered existing climbing lanes to passing-type climbing lanes in 1999. The new type of climbing lanes showed an apparent improvement in mobility. For example, the speeds of vehicles using both climbing lane and other lanes improved a lot. However, there has been no clear evidence about improved safety. METHODS : This research effort was initiated to evaluate the safety of the new passing-type climbing lanes using the comparison-group(CG) method based on three-year-long traffic accident data sets before and after the change, respectively. RESULTS : The passing-type climbing lanes showed twice increased traffic accidents even though the traffic accidents on old type climbing lanes increased 1.1% during the same periods. In addition, in-depth study, the merging area of the passing-type climbing lanes was found out to be the weakest section where 43.8% traffic accidents out of total traffic accidents happened. It is noted that the merging area of the old type climbing showed only 25.0% traffic accidents. CONCLUSIONS : The new passing-type climbing lanes were found to be weak in terms of safety when compared with the old type climbing lanes. Especially, the merging area should be improved to reduce the risk of traffic conflicts between slow-moving vehicles and other vehicles.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.277-281
• /
• 2007

Quite a while ago, Organizations which have slope DB system was running slope of management in several. Frequently, Slope failure was happened by abnormal weather and limit of valuation system at the managed slope. Analysis of other organization slope DB systems is very important that slope DB system maintains same regions on geology. In Korea, slope DB system was running at KEC(Korea Expressway Corporation), Korail(Korea Railroad), and KIGAM(Korea Institute of Geoscience and Mineral Resources). We research theirs DB constructing. For reviewed slope DB system of other country, we searched NLIC(Natural Landslide Information Center)'s DB system in U.S.A., GEO's LPM(landslide Prevention Measures) program in Hongkong, DPRI' ILC(International Consortium on Landslides) program in Japan, and AGSO(Australian Geological Survey Organization)'s NGVUC program in Australia.

• Journal of Industrial Technology
• /
• v.36
• /
• pp.49-55
• /
• 2016

Different criteria for evaluating vulnerability of debris flow hazard proposed by various institutes such as Korea Forest Service(KFS), Korea Institute of Geoscience and Mineral Resources(KIGAM), Ministry of Public Safety and Security (MPSS) and Korea Expressway Corporation (KEC) were reviewed and discussed. Assessment of debris flow hazard for natural slopes around land for house development was carried out on the basis of the report about results of performing in-situ survey. Results of evaluating vulnerability of debris flow hazard by using these methods were compared to each other to discuss appropriateness of their evaluation and to recommend improvement.

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.1
• /
• pp.59-68
• /
• 2001

This paper investigates the structural analysis and design of mechanical heart valve through the numerical analysis methodology. In a numerical analysis methodology application to the thickness minimization structural design of mechanical heart valve, fluid analysis is performed for the blood flow through a bileaflet mechanical heart valve. Simultaneously the kinetodynamic analysis is carried out to obtain the appropriate structural condition for the structural analysis. Thereafter the structural static analysis is also carried out to confirm the thickness minimization structural condition(minimum thickness shape of leaflet).

• Journal of Engineering Education Research
• /
• v.21 no.1
• /
• pp.66-76
• /
• 2018

In order to facilitate the process of designing a fusion curriculum, this study used the learning outcomes presented in KEC2015 to design a fusion goal dimension. The three dimensions of fusion education in the fusion curriculum framework are fusion goals, fusion approach and fusion context. As a result of examining the curriculum learning activities in order to confirm that the developed curriculum meets these three dimensions, it can be confirmed that it contributes relatively evenly to the fusion goal, fusion approach and fusion context dimension. In addition, it provides a procedure to develop the fusion curriculum through the concrete procedures and examples from the design to implementation of the developed fusion curriculum, and to confirm the result of the fusion dimension.

• Journal of Sensor Science and Technology
• /
• v.13 no.4
• /
• pp.264-269
• /
• 2004

This paper describes on an advanced technology of 3C-SiC/Si(100) wafer direct bonding using PECVD oxide to intermediate layer for SiCOI(SiC-on-Insulator) structure because it has an attractive characteristics such as a lower thermal stress, deposition temperature, more quick deposition rate and higher bonding strength than common used poly-Si and thermal oxide. The PECVD oxide was characterized by ATR-FTIR. The bonding strength with variation of HF pre treatment condition was measured by tensile strength measurement system. After etch-back using TMAH solution, roughness of 3CSiC surface crystallinity and bonded interface was measured and analyzed by AFM, XRD, and SEM respectively.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.676-686
• /
• 2010

Damage Cases of variously type are reported that the ground subsidence is caused by the underground cavities at structure and construction works in lime stone or abandoned zone. A underground cavities by direct for zone having an effect on structure have been filled with cement agents. But this measure is urgently needed in materials and work methods, because ground water pollution at water down fillings and flow out, ground disturb at high participle, damage of farms and fishery. The research confirm application of filling method and filling materials of environmentally friendly and economical by Hi-FA new materials have both liquidity and viscosity from case reinforcement in APT site, Gunsan.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.1
• /
• pp.96-104
• /
• 2006

We propose a path planning method to improve the productivity of AOI (automated optical inspection) machines in PCB (printed circuit board) assembly lines. The path-planning problem is the optimization problem of finding inspection clusters and the visiting sequence of cameras to minimize the overall working time. A unified method is newly proposed to determine the inspection clusters and visiting sequence simultaneously. We apply a hybrid genetic algorithm to solve the highly complicated optimization problem. Comparative simulation results are presented to verify the usefulness of the proposed method.

• Journal of Engineering Education Research
• /
• v.15 no.6
• /
• pp.9-18
• /
• 2012

The purposes of this article are to analyze the conditions of using instructional strategies and using gender sensitive instructional strategies at engineering classes of K University. Qualitative analysis methods were adapted. To achieve the purposes, 35 hours of engineering classes from 11 professors from 9th to 20th of November 2009 were videotaped and analyzed. The research findings were discussed by the checklists for general and gender sensitive the instructional strategies which were recommended for the managing the better classes. Students are influenced by professors not only knowledge and skills but also values and attitudes. Professors who take gender sensitive instructional strategies are expected to give good influence the women students.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.521-532
• /
• 2008

The SIP method developed by low noise-vibration from Japan is appropriate to the construction at urban area. However, this method has been misused as a pre-driiled driven pile method in Korea. Hence, Korea Expressway Corporation proposed 'Design & Construction Guideline for the SIP Method' following the original concept of the SIP method at 2004 and 2006. Also construction guideline of another auger-drilled piles were introduced.