• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.386-391
• /
• 2018

An epitaxial GaN layer was grown on a cone-shape-patterned sapphire substrate (PSS) (Sample A) and an AlN-buffered PSS (Sample B) with two growth steps under the same process conditions by employing the hydride vapor phase epitaxy (HVPE) method. We have investigated the characteristics of the GaN layer grown on two kinds of substrates at each growth step. The cross-sectional SEM image of the GaN layer grown on the two types of substrates showed growth states of GaN layers formed during the 1st and 2nd growth steps with different growth durations. Dislocation density was obtained by calculation using the FWHM value of the rocking curve for (002) and (102). Sample A showed 2.62+08E and 6.66+08E and sample B exhibited 5.74+07E and 1.65+08E for two different planes. The red shift was observed is photoluminescence (PL) analysis and Raman spectroscopy results. GaN layers grown on AlN-buffered PSS exhibited better optical and crystallographic properties than GaN layers grown on PSS.

• Fashion & Textile Research Journal
• /
• v.22 no.2
• /
• pp.233-239
• /
• 2020

We proposed a simple process of fabricating electroconductive textiles by coating conductive polymer PEDOT:PSS (Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)) on biocompatible PLA (Poly Lactic Acid) nanofiber web for application to smart healthcare. Electroconductive textiles were obtained by a drop-coating process using different amounts of PEDOT:PSS solutions., DMSO (dimethyl sulfoxide) was then used as an additive in the post-treatment process to improve conductivity. The surface morphology of the specimens was observed by FE-SEM. The chemical structures of the specimens were characterized using FTIR. The electrical properties (linear and sheet resistance) of the specimens were measured. The effect of the bending angles on the electrical properties was also investigated to confirm their applicability as wearable smart textiles. FE-SEM and FTIR analysis confirmed that the deposition of PEDOT:PSS on the PLA nanofiber web surface was successful. The conductivity of the PEDOT:PSS/PLA nanofiber web was enhanced up to 1.5 ml with an increasing amount of PEDOT:PSS solutions, but there was no significant difference at 2.0 ml. The optimum condition of PEDOT:PSS deposition was established to 1.5 ml. Even when the specimen coated with 1.5 ml was bent every 30°, the change in the electrical resistance values was still low within 3.7 Ω. It confirmed that stable electrical performance was maintained and proved the applicability as a flexible textile sensor.

• Reproductive and Developmental Biology
• /
• v.35 no.1
• /
• pp.1-8
• /
• 2011

Techniques to evaluate gene expression profiling, such as sufficiently sensitive cDNA microarrays or real-time quantitative PCR, are efficient methods for monitoring human pluripotent stem cell (hESC/iPSC) cultures. However, most of these high-throughput tests have a limited use due to high cost, extended turn-around time, and the involvement of highly specialized technical expertise. Hence, there is an urgency of rapid, cost-effective, robust, yet sensitive method development for routine screening of hESCs/hiPSCs. A critical requirement in hESC/hiPSC cultures is to maintain a uniform undifferentiated state and to determine their differentiation capacity by showing the expression of gene markers representing all three germ layers, including ectoderm, mesoderm, and endoderm. To quantify the modulation of gene expression in hESCs/hiPSC during their propagation, expansion, and differentiation via embryoid body (EB) formation, we developed a simple, rapid, inexpensive, and definitive multimarker, semiquantitative multiplex RT-PCR platform technology. Among the 9 gene primers tested, 5 were pluripotent markers comprising set 1, and 3 lineage-specific markers were combined as set 2, respectively. We found that these 2 sets were not only effective in determining the relative differentiation in hESCs/hiPSCs, but were easily reproducible. In this study, we used the hES/hiPS cell lines to standardize the technique. This multiplex RT-PCR assay is flexible and, by selecting appropriate reporter genes, can be designed for characterization of different hESC/hiPSC lines during routine maintenance and directed differentiation.

• Journal of Pharmaceutical Investigation
• /
• v.21 no.1
• /
• pp.43-50
• /
• 1991

The hepatic uptake of an anionic fluorescence probe, l-anilino-8-naphthalene sulfonate (ANS) was characterized using isolated rat hepatocytes. The initial uptake rate of ANS by isolated hepatocytes was determined. The uptake process of ANS was fitted well to the Michaelis-Menten equation with a saturable component. The $V_{max}$ and $K_m$ values were $2.9{\pm}0.1\;nmol/min/mg$ protein and $29.1{\pm}3.2\;{\mu}M$, respectively. The uptake clearance $(CL_{up})$ based on the ratio of $V_{max}$ to $K_m$ was 11.7 ml/min/g liver, revealing the good coincidence with that assessed from the analysis of the plasma disappearance curve in previous report. Furthermore, the effect of serum protein on the hepatic uptake of ANS into isolated hepatocytes was investigated. The permeability clearances $(PS_{inf})$ of ANS uptake were much higher than those predicted based on the unbound fractions in the presence of serum. These suggested that the hepatic uptake of extensively serum protein-bound ANS is mediated not only by the unbound form of ligand but also by the serum protein-mediated uptake mechanism.

• Macromolecular Research
• /
• v.15 no.6
• /
• pp.498-505
• /
• 2007

This study demonstrated the in-situ functionalization with polymers of multi-walled carbon nanotubes (MWNTs) via emulsion polymerization. Polystyrene-functionalized MWNTs were prepared in an aqueous solution containing styrene monomer, non-ionic surfactant and a cationic coupling agent ([2-(methacryloyloxy)ethyl]trime-thylammonium chloride (MATMAC)). This process produced an interesting morphology in which the MWNTs, consisting of bead-string shapes or MWNTs embedded in the beads, when polymer beads were sufficiently large, produced nanohybrid material. This morphology was attributed to the interaction between the cationic coupling agent and the nanotube surface which induced polymerization within the hemimicellar or hemicylindrical structures of surfactant micelles on the surface of the nanotubes. In a solution containing MATMAC alone without surfactant, carbon nanotubes (CNTs) were not well-dispersed, and in a solution containing only surfactant without MATMAC, polymeric beads were synthesized in isolation from CNTs and continued to exist separately. The incorporation of MATMAC and surfactant together enabled large amounts of CNTs (> 0.05 wt%) to be well-dispersed in water and very effectively encapsulated by polymer chains. This method could be applied to other well-dispersed CNT solutions containing amphiphilic molecules, regardless of the type (i.e., anionic, cationic or nonionic). In this way, the solubility and dispersion of nanotubes could be increased in a solvent or polymer matrix. By enhancing the interfacial adhesion, this method might also contribute to the improved dispersion of nanotubes in a polymer matrix and thus the creation of superior polymer nanocomposites.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.3 s.357
• /
• pp.52-58
• /
• 2007

This paper describes the PLL of TCON(Timing Controller) chip for FPD(Flat Panel Display). The recent TCON requires wide range frequency operation of $8\sim135MHz$ in PLL. In order to be satisfied this requirement the new V-I converter.circuit. The V-I converter of new architecture increased the minimum/maximum current ratio which widens the operation frequency range of VCO's md also guaranteed linearity of VCO's. The proposed PLL circuits in FPD TCON show the measuring performance of loops RMS jitter in the range of $8\sim135MHz$. The designed circuit was fabricated in 1-ploy 3-metal 0.25um TSMC process technology and has a operation range or $8\sim135MHz$ with 2.5V power.

• Korean Journal of Clinical Pharmacy
• /
• v.26 no.3
• /
• pp.195-200
• /
• 2016

Background: Venous thromboembolism (VTE) is a common and life-threating condition in cancer patients. Low molecular weight heparins (LMWH), such as dalteparin, are recommended in the treatment of VTE. Also, rivaroxaban, an orally administered direct factor Xa inhibitor, was approved for the treatment of VTE. It showed similar efficacy to standard therapy (LMWH or warfarin) and was associated with significantly lower rates of major bleedings. However, in the real world, bleeding has been reported to occur frequently in cancer patient receiving rivaroxaban. The goal of this research was to analyze bleeding risks between rivaroxaban and dalteparin for treatment of VTE in cancer patients. Methods: Medical records of oncology patients who were treated with rivaroxaban or dalteparin for VTE from July 2012 to June 2014 were retrospectively reviewed. Data collected were as follows: age, sex, weight, height, cancer types and stages, ECOG (eastern cooperative oncology group) PS (performance score), VTE types, concurrently used medications, study drug information (dose and duration of therapy), INR (international normalized ratio), PT (prothrombin time), and platelet counts. Bleeding was classified into major bleedings, clinically relevant non-major bleedings, and minor bleedings. Results: A total of 399 patients were included in the study. Of these patients, 246 were treated with rivaroxaban and 153 with dalteparin. Bleeding rates were significantly higher in the rivaroxaban group than in the dalteparin group (adjusted odds ratio (AOR) 2.09, 95% CI 1.22-3.60) after adjusting for confounders. In addition, rivaroxaban remained independently associated with 1.78-fold (95% CI 1.14-2.76) shorter time to bleeding compared to dalteparin after adjusting other factors known to be associated with poor outcomes. Conclusion: This study suggested that rivaroxaban was associated with an increased risk of bleedings in cancer patients.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.12
• /
• pp.1737-1746
• /
• 2013

IbMYB1, a transcription factor (TF) for R2R3-type MYB TFs, is a key regulator of anthocyanin biosynthesis during storage of sweet potatoes. Anthocyanins provide important antioxidants of nutritional value to humans, and also protect plants from oxidative stress. This study aimed to increase transgenic potatoes' (Solanum tuberosum cv. LongShu No.3) tolerance to environmental stress and enhance their nutritional value. Transgenic potato plants expressing IbMYB1 genes under the control of an oxidative stress-inducible peroxidase (SWPA2) promoter (referred to as SM plants) were successfully generated through Agrobacterium-mediated transformation. Two representative transgenic SM5 and SM12 lines were evaluated for enhanced tolerance to salinity, UV-B rays, and drought conditions. Following treatment of 100 mM NaCl, seedlings of SM5 and SM12 lines showed less root damage and more shoot growth than control lines expressing only an empty vector. Transgenic potato plants in pots treated with 400 mM NaCl showed high amounts of secondary metabolites, including phenols, anthocyanins, and flavonoids, compared with control plants. After treatment of 400 mM NaCl, transgenic potato plants also showed high DDPH radical scavenging activity and high PS II photochemical efficiency compared with the control line. Furthermore, following treatment of NaCl, UV-B, and drought stress, the expression levels of IbMYB1 and several structural genes in the flavonoid biosynthesis such as CHS, DFR, and ANS in transgenic plants were found to be correlated with plant phenotype. The results suggest that enhanced IbMYB1 expression affects secondary metabolism, which leads to improved tolerance ability in transgenic potatoes.

• Advances in Traditional Medicine
• /
• v.4 no.4
• /
• pp.261-266
• /
• 2004

Wound swabs and pus samples were collected from diabetic foot ulcers, and control pus samples from non-diabetic cases. In 144 diabetic cases screened, Pseudomonas aeruginosa was isolated from 78 cases, in which 10.59% of the isolates were multidrug resistant (MDR), whereas the 60 control cases were not MDR. The isolated bacteria were decreasingly resistant to 6 clinically administrated antimicrobics such as ceftazidime, gentamicin, ciprofloxacin, tobramycin, piperacillin and amikacin. Therefore, it is demanded that new and more effective antimicrobials of phytochemical origins are sought after. Among 11 isoflavones (YS11-YS21) isolated from Sophora and Euchresta (Leguminosae; pea plant family), 2 (YS19 and YS21) prominently exhibited the high antibacterial activity both in vitro and in vivo. By the preliminary results, the object of this paper is to evaluate the in vitro antibacterial effect of YS19 and YS21 on the clinically isolated bactera of Ps. Aeruginosa in hospitals. All the isolates were sensitive to YS19 and YS21 and for both, minimum inhibitory concentration (MIC) values ranged from $2\;to\;50\;{\mu}g/mL$. The $MIC_{90}$ values of YS19 and YS21 were $50\;{\mu}g/mL$. It is suggested that these isoflavones might consist a basis phytochemical prevention and therapy for diabetic foot infections caused by pseudomonads.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.24.2-24.2
• /
• 2009

Nanostuctures such as nanodot and nanowire have been extensively studied as building blocks for nanoscale devices. However, the direct growth of the nanostuctures at the desired position is one of the most important requirements for realization of the practical devices with high integrity. Self-assembled nanotemplate is one of viable methods to produce highly-ordered nanostructures because it exhibits the highly ordered nanometer-sized pattern without resorting to lithography techniques. And selective epitaxial growth (SEG) can be a proper method for nanostructure fabrication because selective growth on the patterned openings obtained from nanotemplate can be a proper direction to achieve high level of control and reproducibility of nanostructucture fabrication. Especially, SiGe has led to the development of semiconductor devices in which the band structure is varied by the composition and strain distribution, and nanostructures of SiGe has represented new class of devices such nanowire metal-oxide-semiconductor field-effect transistors and photovoltaics. So, in this study, various shaped SiGe nanostructures were selectively grown on Si substrate through ultrahigh vacuum chemical vapor deposition (UHV-CVD) of SiGe on the hexagonally arranged Si openings obtained using nanotemplates. We adopted two types of nanotemplates in this study; anodic aluminum oxide (AAO) and diblock copolymer of PS-b-PMMA. Well ordered and various shaped nanostructure of SiGe, nanodots and nanowire, were fabricated on Si openings by combining SEG of SiGe to self-assembled nanotemplates. Nanostructure fabrication method adopted in this study will open up the easy way to produce the integrated nanoelectronic device arrays using the well ordered nano-building blocks obtained from the combination of SEG and self-assembled nanotemplates.