• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.1
• /
• pp.1-11
• /
• 2017

In this paper, design requirements of the large radar were investigated, and development was performed through the analysis and design. Large radar should be designed by bearing the 75 knot wind force and $20kg/m^2$ ice mass as operating conditions in order to meet structural stability, and driving torque and bearing load were calculated for securing the driving stability. Thermal dissipation analysis was performed considering TRM and DC-DC Converter's limitation temperature by $50^{\circ}C$ ambient temperature condition in order to attain thermal stability, and PSD and shock analysis were carried out by using MIL-STD-810G vibration and shock specification in order to transport and installation of the large radar. As a result, all components of large radar could secure the structural stability more than 2.8 factor of safety, and driving stability was also secured with adequate bearing fatigue life. Thermal stability was attained by allowable max temperature 88.7 C of the TRM, and structural stability for transportation and installation of the large radar was also secured more than 5 factor of safety. After it was transported and installed to the radar site, operating capability was finally verified by rotating the large radar.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.4
• /
• pp.135-143
• /
• 2013

In this study, we suggested effective countermeasure of biodiesel oxidation problems by investigating the oxidation degradation of biodiesels derived from variable resources and the level of oxidation stability of current distributing biodiesel blended fuels (2%) in Korea, and oxidation stability change according to storage time (for 3 month) and biodiesel blending ratio (2, 5, 7, 10%). By the composition analysis results of biodiesel from various resources which are possible to distribute in Korea, the biodiesel from animal fat has poor oxidation stability and cold performance, while the biodiesel from coconut and palm kernel which are considered as future potential raw material showed good oxidation stability and cold performance. The oxidation stability level of current distributing biodiesel blended fuels in Korea was excellent with showing over 30 hours (average 68 hours) stability, but the oxidation stability of the blended fuel with animal fat biodiesel having poor oxidation property (1.22 hours) was rapidly decreased to below 32 hours by mixing only 2%. Therefore, we have to pay attention to quality control of oxidation property, because the oxidation stability problem can be caused by increasing biodiesel blending ratio and diversifying raw materials those have worse property.

• Tunnel and Underground Space
• /
• v.22 no.5
• /
• pp.297-309
• /
• 2012

The stability assessment of abandoned gangway for the purpose of services was performed. Among the many factors that affect the stability of openings, the span of the opening in a given rock mass condition provides an important element of design. In this paper, the stability of gangway was assessed by the critical span curves proposed by Lang, the modified Mathews'stability graph method and using support measures of the Q system. In the evaluation of stability as a whole the gangway is considered as stable. But the rockfalls of wedge-shaped blocks were expected in the area in which the horizontal joints of low angle appear. The support measures such as local rock bolts are required to use for commercial purposes of the abandoned gangway. And entrance section may require the particular attention as unstable section. Since there are so many spalling due to bad blasting in the roof and sidewall of gangway, the scaling operations should be followed primarily.

• Journal of the Korean Mathematical Society
• /
• v.37 no.5
• /
• pp.657-664
• /
• 2000

A new concept of stability that includes Lyapunov and orbital stabilities and leads to concepts in between them is discussed in terms of a given topology of the function space. The criteria for such new concepts to hold are investigted employing suitably Lyapunov-like functions and the comparison principle.

• Bulletin of the Korean Mathematical Society
• /
• v.37 no.3
• /
• pp.477-486
• /
• 2000

In this paper, we investigate the Hyers-Ulam-Rassias stability of a quadratic functional equation f(x+y+z)+f(x+y)+f(y-z)+f(z-x)=3f(x)+3f(y)+3f(z) and prove the Hyers-Ulam stability of the equation on restricted (unbounded) domains.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.3
• /
• pp.597-603
• /
• 2010

We obtain, in using generalized norms, some stability results for a very general system of di erential equations using the method of cone-valued Lyapunov funtions and we obtain necessary and/or sufficient conditions for the uniformly asymptotic stability of the nonlinear differential system.

• Journal of applied mathematics & informatics
• /
• v.6 no.3
• /
• pp.929-935
• /
• 1999

By applications of the stability for a class of functional equa-tions we obtain the hyers-Ulam stability for the equations of the form g($\chi$+y)=kg($\chi$)g(y) in the following setting; ｜g($\chi$+y)-kg($\chi$)g(y)｜$\leq$$\Delta$($\chi$,y).

• Communications of the Korean Mathematical Society
• /
• v.18 no.1
• /
• pp.133-149
• /
• 2003

Local stability of steady states of an epidemic model is considered. An age structured S-I-R epidemic model with separable inter-cohort force of infection with external force is considered. Stability result for the nontrivial steady states is obtained.

• Journal of Mechanical Science and Technology
• /
• v.20 no.9
• /
• pp.1428-1435
• /
• 2006

A slightly curved crack with an eigenstrain is considered. Solutions for a slightly curved crack in a linear isotropic material under asymptotic loading as well as for a slightly curved crack in a linear isotropic material with a concentrated force are obtained from perturbation analyses, which are accurate to the first order of the parameter representing the non-straightness. Stress intensity factors for a slightly curved crack with an eigenstrain are obtained from the perturbation solutions by using a body force analogy. Particular attention is given to the crack path stability under mode I loading. A new parameter of crack path stability is proposed for a crack with an eigenstrain. The path stability of a crack with steady state growth in a transforming material and a ferroelectric material is examined.

• Journal of Power Electronics
• /
• v.14 no.1
• /
• pp.143-155
• /
• 2014

The stability issues of a multi-module distributed DC power system without current-sharing loop are analyzed in this study. The physical understanding of the terminal characteristics of each sub-module is focused on. All the modules are divided into two groups based on the different terminal property types, namely, impedance (Z) and admittance (Y) types. The equivalent circuits of each group are established to analyze the stability issues, and the mathematical equations of the equivalent circuits are derived. A generalized criterion for multi-module distributed systems is proposed based on the stability criterion in a cascade system. The proposed criterion is independent of the power flow direction.