• 제목/요약/키워드: K-mismatch

검색결과 896건 처리시간 0.025초

이진가중치 전하 재분배 디지털-아날로그 변환기의 비선형 오차 감지 및 보상 방법 (Non-Linearity Error Detection and Calibration Method for Binary-Weighted Charge Redistribution Digital-to-Analog Converter)

  • 박경한;김형원
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2015년도 추계학술대회
    • /
    • pp.420-423
    • /
    • 2015
  • 이진가중치 전하재분배 DAC는 커패시터를 기반으로 구동하고 커패시터 값에 따라서 데이터 변환을 시킨다. 전하재분배 DAC의 성능을 결정하는 가장 중요한 요소는 정확한 커패시터와 트랜지스터 소자들의 크기와 특성의 보장이다. 그러나 고해상도의 DAC에서는 회로의 레이아웃 설계시의 mismatch와 칩의 공정변화에 의해 다양한 기생소자 성분 발생과 소자특성의 변화를 피하기는 매우 어렵다. 이러한 소자 mismatch는 DAC 각 비트의 해당 아날로그 값에 비선형 오차를 발생시켜 SNDR 성능저하를 가져오게 된다. 본 논문에서는 커패시터 mismatch에 의한 DAC의 데이터 오차를 감지하고 이를 보상하는 방법을 제안한다. 제안된 방법은 2개의 동일한 DAC를 사용한다. 2개의 DAC는 고정된 차이를 가진 2개의 디지털 입력을 사용함으로써 각각 데이터가 변환된다. 비교기는 허용되는 차이 보다 큰 비선형 오차를 찾을 수 있다. 우리가 제안하는 보정 방법은 비교기가 오차를 제거 할 때 까지 DAC의 커패시터 사이즈를 바꾸면서 미세한 조정을 할 수 있다. 시뮬레이션은 12bit 이진가중치 전하재분배 디지털-아날로그 변환기의 커패시터 mismatch 보정과 비선형 오차를 효과적으로 감지하는 방법을 나타낸다.

  • PDF

An Adaptation Method in Noise Mismatch Conditions for DNN-based Speech Enhancement

  • Xu, Si-Ying;Niu, Tong;Qu, Dan;Long, Xing-Yan
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권10호
    • /
    • pp.4930-4951
    • /
    • 2018
  • The deep learning based speech enhancement has shown considerable success. However, it still suffers performance degradation under mismatch conditions. In this paper, an adaptation method is proposed to improve the performance under noise mismatch conditions. Firstly, we advise a noise aware training by supplying identity vectors (i-vectors) as parallel input features to adapt deep neural network (DNN) acoustic models with the target noise. Secondly, given a small amount of adaptation data, the noise-dependent DNN is obtained by using $L_2$ regularization from a noise-independent DNN, and forcing the estimated masks to be close to the unadapted condition. Finally, experiments were carried out on different noise and SNR conditions, and the proposed method has achieved significantly 0.1%-9.6% benefits of STOI, and provided consistent improvement in PESQ and segSNR against the baseline systems.

강박증 환자에서의 Mismatch Negativity 이상에 관한 연구 (Abnormal Mismatch Negativity in Patients with Obsessive-Compulsive Disorder)

  • 장준환;신경순;손준희;권준수
    • 대한불안의학회지
    • /
    • 제6권1호
    • /
    • pp.31-36
    • /
    • 2010
  • Objective : Mismatch negativity (MMN) provides an electrophysiological index of an involuntary attention switching process. This study investigated MMN anomalies and their relationship to clinical variables in patients with obsessive-compulsive disorder (OCD). Methods : Study participants were 29 OCD patients and 24 normal controls. We used a 128-channel EEG to measure MMN during a passive oddball paradigm. Then we assessed the correlations between MMN amplitudes and clinical measures. Results : The OCD patients exhibited significantly greater MMN amplitude compared to the controls. Also, the right frontal lobe MMN amplitudes correlated significantly to the OCD patients' Yale-Brown Obsessive Compulsive Scale total scores (r=-0.520, p=0.005). Conclusion : These results suggest that MMN anomalies in OCD patients reflect a monitoring circuit dysfunction, raising the possibility that the OCD's pathophysiology includes glutamatergic dysfunction.

부정합 감지 복제 전하 펌프를 이용한 자동 전류 보상 전하 펌프의 설계 (A Design of an Automatic Current Correcting Charge-Pump using Replica Charge Pump with Current Mismatch Detection)

  • 김성근;김영신;부영건;박준성;허정;이강윤
    • 대한전자공학회논문지SD
    • /
    • 제47권2호
    • /
    • pp.94-99
    • /
    • 2010
  • 본 논문에서는 공정, 전압, 온도 변화에도 전하 펌프의 전류부정합을 자동으로 보정하기 위한 전하 펌프 구조를 제안한다. 일반적으로 위상 동기 루프의 위상 잡음 및 스퍼 성능을 향상시키기 위해서 전하 펌프의 전류부정합을 최소화해야 한다. 전류부정합을 보정하기 위해서 복제 전하 펌프로부터 전류 복사를 통해 어떠한 경우에도 실제 전류 차이만큼을 피드백 하도록 하는 방법을 제안하였다. 이 방법은 전하 펌프의 전류부정합을 해결하기 위한 여러 가지 방법 중에서도 상대적으로 간단한 회로로 구성할 수 있으며, 부정합 전류치를 그대로 복사하기 때문에 높은 정확도를 가진다. 기존에 제안되었던 방법들은 대부분 다이나믹 특성에 대한 성능이 부족하지만 본 논문에서 제안된 방법은 실시간으로 보정기능을 수행함으로써 다이나믹 특성에서도 우수한 성능을 가진다. 제안하는 전하 펌프는 $0.13{\mu}m$ CMOS 공정으로 설계 되었으며, 면적은 $100{\mu}m\;{\times}\;160{\mu}m$이다. 1.2V의 공급전압에서 0.2V ~ 1V의 출력 전압 범위를 가진다. 충전 전류와 방전 전류는 $100{\mu}A$이며, PVT variation에 대한 전류 부정합은 1% 미만이다.

16-QAM OFDM-Based K-Band LoS MIMO Communication System with Alignment Mismatch Compensation

  • Kim, Bong-Su;Kim, Kwang-Seon;Kang, Min-Soo;Byun, Woo-Jin;Song, Myung-Sun;Park, Hyung Chul
    • ETRI Journal
    • /
    • 제39권4호
    • /
    • pp.535-545
    • /
    • 2017
  • This paper presents a novel K-band (18 GHz) 16-quadrature amplitude modulation (16-QAM) orthogonal frequency-division multiplexing (OFDM)-based $2{\times}2$ line-of-sight multi-input multi-output communication system. The system can deliver 356 Mbps on a 56 MHz channel. Alignment mismatches, such as amplitude and/or phase mismatches, between the transmitter and receiver antennas were examined through hardware experiments. Hardware experimental results revealed that amplitude mismatch is related to antenna size, antenna beam width, and link distance. The proposed system employs an alignment mismatch compensation method. The open-loop architecture of the proposed compensation method is simple and enables facile construction of communication systems. In a digital modem, 16-QAM OFDM with a 512-point fast Fourier transform and (255, 239) Reed-Solomon forward error correction codecs is used. Experimental results show that a bit error rate of $10^{-5}$ is achieved at a signal-to-noise ratio of approximately 18.0 dB.

LINC 시스템 구현을 위한 닫힌 해를 갖는 크기 위상 오차 검출 기법 (The Gain and Phase Mismatch Detection Method with Closed Form Solution for LINC System Implementation)

  • 명성식;이일규;임규태;육종관
    • 한국전자파학회논문지
    • /
    • 제19권5호
    • /
    • pp.547-555
    • /
    • 2008
  • 본 논문에서는 linear amplification with nonlinear components(LINC) 시스템의 두 신호 경로에 발생하는 크기와 위상 오차를 자동으로 검출하여 보상하는 알고리즘을 제안하였다. LINC 시스템은 첨두 대 평균 전력비가 큰 non-constant envelop 신호를 constant envelop 신호로 바꿔주어 고효율 전력 증폭기를 사용할 수 있는 장점이 있다. 그러나 LINC 시스템은 두 전력 증폭기의 경호에서 발생하는 매우 작은 경로 오차에 민감하게 성능이 열화된다는 단점이 있다. 본 논문에서는 4개의 테스트 신호를 이용하여 두 경로의 크기와 위상 오차를 검출하는 알고리즘을 제안하였다. 제안된 오차 검출 기법은 닫힌 해(closed form solution)를 가지며, 반복 계산이 필요하지 않아, 빠르고 효율적으로 오차를 검출할 수 있다. 본 논문에서는 제안된 기법을 적용하여 오차 검출과 검출된 결과를 반영하여 신호의 왜곡을 보상하는 digital-IF 형태를 갖는 LINC 시스템을 구현하였다. 구현된 LINC 시스템은 7 MHz 채널 대역을 갖고 16-QAM으로 변조된 IEEE 802.16 WiMAx 기저 대역 신호를 이용하여 성능을 분석하였으며, 제안된 기법을 이용하여 EVM이 -37.37 dB까지 개선되었으며, 이로서 LINC 시스템 구현시 제안된 오차 검출 및 보상 기법의 적용 타당성을 확인하였다.

Elemental Image Generation Method with the Correction of Mismatch Error by Sub-pixel Sampling between Lens and Pixel in Integral Imaging

  • Kim, Jonghyun;Jung, Jae-Hyun;Hong, Jisoo;Yeom, Jiwoon;Lee, Byoungho
    • Journal of the Optical Society of Korea
    • /
    • 제16권1호
    • /
    • pp.29-35
    • /
    • 2012
  • We propose a subpixel scale elemental image generation method to correct the errors created by finite display pixel size in integral imaging. In this paper, two errors are mainly discussed: pickup-and-display mismatch error and mismatch error between pixel pitch and lens pitch. The proposed method considers the relative positions between lenses and pixels in subpixel scale. Our proposed pickup method calculates the position parameters, generates an elemental image with pixels completely inside the lens, and generates an elemental image with border pixels using a weighted sum method. Appropriate experiments are presented to verify the validity of the proposed method.

동적하중하에서의 강도적 불균질재의 연성크랙 발생한계의 해석적 검토 - 강도적 불균질 및 동적부하의 영향에 의한 연성크랙 발생조건 (제 2 보) - (Analytical Examination of Ductile Crack Initiation with Strength Mismatch under Dynamic Loading - Criterion for Ductile Crack Initiation Effect of Strength Mismatch and Dynamic Loading (Report 2) -)

  • 안규백;;;방한서
    • Journal of Welding and Joining
    • /
    • 제21권7호
    • /
    • pp.49-58
    • /
    • 2003
  • It has been well known that ductile fracture of steel is accelerated by triaxiality stresses. The characteristics of ductile crack initiation in steels are evaluate quantitatively using two-parameter criterion based on equivalent plastic strain and stress triaxiality. Recently, the characteristics of critical crack initiation of steels are quantitatively estimated using the two-parameter, that is, equivalent plastic strain and stress triaxiality, criterion. This study is paid to the fundamental clarification of the effect of geometrical heterogeneity and strength mismatching, which can elevate plastic constraint due to heterogeneous plastic straining, and loading rate on critical condition to initiate ductile crack using two-parameter. Then, the crack initiation testing were conducted under static and dynamic loading. To evaluate the stress/strain state in the specimens especially under dynamic loading, thermal elastic-plastic dynamic FE-analysis considering the temperature rise was used. The result showed that the critical global strain to initiate ductile fracture in specimens with strength mismatch under various loading rate cu be estimated based on the local criterion, that is two-parameter criterion obtained on homogeneous specimens under static tension, by mean of FE-analysis taken into account accurately both strength mismatch and dynamic loading effects on stress/strain behavior.

전기화학법을 이용한 DNA Hybridization 검출 센서의 개발 및 특성 해석 (Development of DNA Hybridization Detection Sensors and Analysis of Characteristics Using Electrochemical methods)

  • 옥진영;김도균;장정수;권영수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
    • /
    • pp.260-262
    • /
    • 2002
  • The determination of DNA hybridization can apply the molecular biology research. clinic diagnostics. bioengineering, environment monitoring, food science and other application area. So, The determination of hybridization is very important for the improvement of DNA detection system. In this study, we report the characterization of the DNA hybridization by the electricalchemical methods. The probe oligonucleotide was used to determine the amount of target oligonucleotide in solution using Methylen Blue(MB) as the electrochemical indicators. The cathodic peak currents($I_{peak}$) of MB were linearly related to the concentration of the target oligonucleotide sequence in the range $1[{\mu}M]{\sim}0.1[{\mu}M]$. The detection limit of this approach was 0.01[nM]. As a result, the match oligonucleotide(CR-1) was most stable state and the peak of redox current measured by DNA hybridization detection sensors by using electrochemical method seem to be similar to 1-mer terminal mismatch oligonucleotide(MR-3). The MR-2, MR-3, MR-22 and MR-33 have each mismatching sequence of central and terminal. With this set the role of point mutations was to be investigated. Terminal mismatch oligonucleotide (MR-3, 33) is shown more stable state than central mismatch oligonucleotide(MR-2, 22). And 1-mer mismatch oligonucleotide(MR-2 or 3) is shown more stable state than 2-mer mismatch oligonucleotide(MR-22 or 33).

  • PDF

A New Low-BMR Quantization Method for Wireless Channel Characteristics-based Secret Key Generation

  • Wang, Qiuhua;Lyu, Qiuyun;Wang, Xiaojun;BAO, Jianrong
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제11권10호
    • /
    • pp.5080-5097
    • /
    • 2017
  • Channel characteristics-based secret key generation is an effective physical-layer security method. The issues of how to remove the effect of random noise and to balance the key generation rate (KGR) and the bit mismatch rate (BMR) are needed to be addressed. In this paper, to reduce the effect of random noise and extract more secret bits, a new quantization scheme with high key generation rate and low bit mismatch rate is proposed. In our proposed scheme, we try to use all measurements and correct the differences caused by noise at the boundary regions instead of simply dropping them. We evaluate and discuss the improvements of our proposed scheme. The results show that our proposed scheme achieves lower bit mismatch rate as well as remaining high key generation rate.