• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.4
• /
• pp.730-737
• /
• 1988

Determining the robot motion using optimal technique has been studied often in recent years however the study of determining the optimal robot dimensions is very rare. In this paper, the authors attempted to find out the least driving torques at each joint as the optimization of link length refered to a 3R robot manipulator. For the given linear path with triangular velocity profile, the inverse kinematic and inverse dynamic problems are examined in order to lead into solution of problem suggested for optimal design of link lengths. Accordingly, optimal link lengths in the case of given linear path is obtained with respect to the parameter of link ratios.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.1
• /
• pp.39-46
• /
• 2011

The purpose of this study was to examine differences between players who bend the left elbow and those who stretch it during the forward swing from BST to BC in a 2-handed backhand stroke among outstanding high school tennis players, and to assess the detailed 3D rotational kinematic characteristics of the shoulder and the hip. Statistically significant differences were observed between groups in the longitudinal axis rotation angle of the shoulder and the angle between the shoulder and the arm at BST, and in the side to side movement of the shoulder, the up and down movement of the hip, the side tilt angular velocity of the shoulder, the side tilt angular velocity of the hip, and the front tilt angular velocity of the hip at BC. The difference in the longitudinal axis rotation angle of the shoulder between the 2 groups suggests a difference in the flexibility of the joint in the shoulder arm racquet system. The longitudinal axis rotation angular velocity of the shoulder reached its peak at 75 % of the duration of the analyzed segment and then decreased little by little until BC. This time is considered the stage for increasing the angular velocity of the upper arm, the forearm, the hand and then the racquet, which are more distal segments than the shoulder.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1330-1341
• /
• 1993

The kinematic synthesis deals with the systematic design of mechanisms for a given performance. The area of synthesis may be grouped into two categories to determine the type and to size the dimensions of a mechanism for a specified task. In this paper, using a database of mechanisms a designer can determine the type of mechanism conveniently and design equations are automatically generated for a given input performance. The solving method of design equations utilizes an optimization routine to obtain roots effectively. The linkages of 4, 6, and 8bars with revolute joints are considered in this study but may be extended to linkages of more bars.

• The Journal of Korean Physical Therapy
• /
• v.27 no.2
• /
• pp.89-95
• /
• 2015

Purpose: The purpose of this study is to determine the effects of visual information on movement time and each angular velocity of trunk and lower extremity joints while healthy adults are in sitting and squat motion. Methods: Participants consisted of 20 healthy male and female adults; movement time and each angular velocity of trunk, pelvis, hip, knee and ankle of sitting and squat motion according to common vision, visual task and visual block were analyzed using a three dimensional motion analysis system. Results: Each angular velocity of the trunk, pelvis, hip, knee and ankle in phase 2 of the sitting showed significant difference according to the types of visual information (p<0.05). Movement time and each angular velocity of pelvis and hip in phase 2 of squat motion showed significant difference according to the types of visual information (p<0.05). According to the common vision, each angular velocity of knee and ankle in phase 1 was significantly fast in sitting (p<0.05). According to the common vision, each angular velocity of trunk, pelvis, hip, knee, and ankle in phase 2 was significantly fast in sitting (p<0.05). Conclusion: Visual information affects the angular velocity of the motion in a simple action such as sitting, and that in more complicated squat motion affects both the angular velocity and the movement time. In addition, according to the common vision, visual task and visual block, as angular velocities of all joints were faster in sitting than squat motion.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.2
• /
• pp.129-137
• /
• 2010

The purpose of this study is to investigate the effect of a 12-week aquatic exercise on obstacle gait in older women. Originally, 20 healthy female elderly participated this study but 12 of them completed the program. All participants were trained in the aquatic exercise program by an authorized trainer. They had come to the authors' lab three times during training period(0, 6, 12 weeks) and performed obstacle gait with three different height(0, 30, and 50% of leg length). After performed 3-Dimensional motion analysis following results were found. (1) For the CV, MVHC, TC, HC, statistically significances were shown in obstacle height. Although significant training effects were not shown, all variables showed typical patterns and it was considered as efficient motion to overcome the height obstacles. (2) The anterior-posterior and vertical GRF of support leg during support phase were revealed in height effect but in training one. However, differences between Peak 1 and Peak 2 in vertical GRF increased as training period increased. (3) Knee and hip resultant joint moments were affected by training but ankle resultant moments remained unchanged.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.1
• /
• pp.1-9
• /
• 2013

The purpose of this study was to provide information on athletes' characteristics and advantages and disadvantages by analyzing the kinematic factors having a decisive influence on competitive abilities such as release conditions in the delivery phase on major Korean javelin athletes. Two supported javelin throwers of the Korean national team participated in this study. The total average time required of the delivery phase was 0.31(${\pm}0.016$). The athletes' release angle was 33.2 to 41.7 degrees. The attack angle varied widely from -3.5 to 5.9 degrees. The Javelin heights of Subject A and B were 95.9 and 89.2%Ht. The average stride length were 180.6 and 176.7cm. The center of mass velocity of LFD and REL was relatively low in all the subjects. The average deceleration rates of center of mass velocity of Subject A and B were 57.2 and 48.9%lose. The left knee angles of Subject A and B were 160.1 and 155.5 degrees in LFD, 153.0 and 164.0 degrees in REL. The joint velocity of upper limb segments was relatively low in all the subjects. The maximum average wrist velocity of Subject A and B was 18.2 and 16.3 m/s in REL.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.8
• /
• pp.1231-1239
• /
• 2015

We developed a robot that has four limbs, each of which has the same kinematic structure and has 6 degrees of freedom. The robot is 600mm high and weighs 4.3kg. The robot can perform walking and manipulating task by using the four limbs selectively. The robot has three walking patterns. The first one is biped walking, which uses two rear limbs as legs and two front limbs as arms. The second one is biped walking with supporting arms, which is basically biped walking but uses two arms as supporting legs for increasing stability of the robot. The last one is quadruped walking, which uses all the four limbs as legs. When a task for the robot is given, the robot approaches the task point by selecting an appropriate walking pattern among three walking patterns and performs the task. The robot has many degrees of freedom and is a redundant system for a three dimensional task. We propose a redundancy resolution method, in which the robot’s translational move to the task point is modeled as a prismatic joint and optimal solutions are obtained by optimizing some performance criteria. Several simulations are performed for the validity of the proposed method.

• The Journal of Korea Robotics Society
• /
• v.12 no.1
• /
• pp.42-54
• /
• 2017

Using an inverse of the geometric Jacobian matrix is one of the most popular ways to control robot manipulators, because the Jacobian matrix contains the relationship between joint space velocities and operational space velocities. However, the control algorithm based on Jacobian matrix has algorithmic singularities: The robot manipulator becomes unstable when the Jacobian matrix loses rank. To solve this problem, various methods such as damped and filtered inverse have been proposed, but comparative studies to evaluate the performance of these algorithms are insufficient. Thus, this paper deals with a comparative analysis of six representative singularity avoidance algorithms: Damped Pseudo Inverse, Error Damped Pseudo Inverse, Scaled Jacobian Transpose, Selectively Damped Inverse, Filtered Inverse, and Task Transition Method. Especially, these algorithms are verified through computer simulations with a virtual model of a humanoid robot, THORMANG, in order to evaluate tracking error, computational time, and multiple task performance. With the experimental results, this paper contains a deep discussion about the effectiveness and limitations of each algorithm.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.2
• /
• pp.161-173
• /
• 2003

This study was performed to investigate the kinematic and kinetic differences between functional walking shoe(FWS) and general sports shoe(GSS). The subjects for this study were 4 male adults who had the walking pattern of rearfoot strike with normal feet. The movement of one lower leg was measured using force platform and 3 video cameras while the subjects walked at the velocity of 2/1.5 m/s. The findings of this study were as follows 1. The angle of lower leg-ground and angle of knee with FWS was greater than with GSS at the moment of strike the floor and the moment of second peak ground reaction force. The decreasing rate of angle of ankle was smaller in FWS from the strike phase to the second peak ground reaction force. These mean upright walking and round walking along the shoe surface. 2. The maximal Increased angle of Achilles tendon and the minimal decreased angle of rearfoot were smaller in FWS very significantly(p<0.001). Thus FWS prevent the excessive pronation of ankle and have good of rear-foot control. 3. The vortical ground reaction force and the rate of it to the BW were smaller in FWS statistically(p<0.001). The loading rate was smaller in FWS, too, and thess represent the reduction of load on ankle joint and prevention of injuries on it.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.3
• /
• pp.23-29
• /
• 2007

The purpose of this study were to investigate the differences between female and male basketball players in knee neuromuscular biomechanical factors during basketball rebound jump. Twelve high school female ($17.9{\pm}0.8years$) and twelve male ($19.0{\pm}1.6years$) basketball players rebound jumped for maximal vertical height to sufficiently stress the anterior cruciate ligament. Kinematic and ground reaction data were collected and combined with inverse dynamics to estimate the knee extensor and abductor torque. The EMG data from the biceps femoris and rectus femoris was used to estimate the ratio of quadriceps muscle activity. Female athletes showed more reduced knee flexion at foot contact, more increased knee abduction, extensor and abductor knee joint torque at foot contact, and quadriceps ratio at stance phase than those of male athletes. In conclusion, Female athletes showed differences in knee neuromuscular biomechanical factors than male athletes during basketball rebound jump.