• Title/Summary/Keyword: JOGGING SHOES

Search Result 9, Processing Time 0.017 seconds

The Comparative Analysis of Wearing Roller Shoes and Jogging Shoes on Kinematic Characteristics in the Lower Extremity during Walking (롤러 신발과 조깅 신발 착용 후 보행 시 하지 분절의 운동학적 특성 비교 분석)

  • Jang, Jae-Ik;Chae, Woen-Sik;Kang, Nyeon-Ju;Yoon, Chang-Jin
    • Korean Journal of Applied Biomechanics
    • /
    • v.19 no.2
    • /
    • pp.399-406
    • /
    • 2009
  • The purpose of this study was to compare the effect of wearing roller shoes and jogging shoes on kinematic characteristics in lower extremity during walking. Eight male middle school students(age: $15.0{\pm}0.0^{\circ}$ yrs, height $175.9{\pm}6.6cm$, weight: $616.3{\pm}84.9$ N) who have no musculoskeletal disorder were recruited as the subjects. Temporal parameters, step length, stride length, center of mass, velocity of CM, angle of segment, angular velocity and range of motion were determined for each trial. For each dependent variable, paired t-test was performed to test if significant difference existed between shoe conditions(p < .05). The results showed that stride length and velocity of CM in wearing roller shoes were significantly less than those found in wearing jogging shoes. These indicated that walking patterns may be changed by different shoe conditions and unstable braking condition because of wheel. Angle of ankle joint at LHC1 and LHC2 in wearing roller shoes was greater than the corresponding value for wearing jogging shoes. It seems that the ankle joints are locked in an awkward fashion at the heel contact to compensate for imbalance. Otherwise, dorsi flexion was not produced at the heel contact point in wearing roller shoes.

The Effects of Wearing Roller Shoes on Ground Reaction Force Characteristics During Walking (롤러 신발과 조깅 슈즈 신발 착용 후 보행 시 지면반력의 형태 비교 분석)

  • Chae, Woen-Sik
    • Korean Journal of Applied Biomechanics
    • /
    • v.16 no.1
    • /
    • pp.101-108
    • /
    • 2006
  • The purpose of this study was to compare GRF characteristics during walking wearing jogging and roller shoes. Twelve male middle school students (age: $15.0{\pm}0.0\;yrs$, height: $173.6{\pm}5.0\;cm$, weight: $587.6{\pm}89.3\;N$) who have no known musculoskeletal disorders were recruited as the subjects. Kinematic data from six S-VHS camcorders(Panasonic AG456, 60 fields/s) and GRF data from two force platform; (AMII OR6-5) were collected while subjects walked wearing roller and jogging shoes in random order at a speed of 1.1 m/s. An event sync unit with a bright LED light was used to synchronize the video and GRF recordings. GRF data were filtered using a 20 Hz low pass Butterworth. digital filter and further normalized to the subject's body weight. For each trial being analyzed, five critical instants and four phases were identified from the recording. Temporal parameters, GRFs, displacement of center of pressure (DCP), and loading and decay rates were determined for each trial. For each dependent variable, paired t-test was performed to test if significant difference existed between shoe conditions (p <.05). Vertical GRFs at heel contact increased and braking forces at the end of initial double limb stance reduced significantly when going from jogging shoe to roller shoe condition. Robbins and Waked (1997) reported that balance and vertical GRF are closely related It seems that the ankle and knee joints are locked in an awkward fashion at the heel contact to compensate for the imbalance. The DCP in the antero-posterior direction for the roller shoe condition was significantly less than the corresponding value for the jogging shoe condition. Because the subjects tried to keep their upper body weight in front of the hip to prevent falling backward, the DCP for the roller shoe condition was restricted The results indicate that walking with roller shoes had little effect on temporal parameters, and loading and decay rates. It seems that there are differences in GRF characteristics between roller shoe and jogging shoe conditions. The differences in GRF pattern may be caused primarily by the altered position of ankle, knee, and center of mass throughout the walking cycle. Future studies should examine muscle activation patterns and joint kinematics during walking with roller shoes.

The Effects of Wearing Roller Shoes on Muscle Activity in The Lower Extremity During Walking (롤러신발과 일반신발의 착용 후 보행 시 하지근의 근전도 비교)

  • Chae, Woen-Sik;Lim, Young-Tae;Lee, Min-Hyung;Kim, Jung-Ja;Kim, Youn-Joung;Jang, Jae-Ik;Park, Woen-Kyoon;Jin, Jae-Hong
    • Korean Journal of Applied Biomechanics
    • /
    • v.16 no.3
    • /
    • pp.137-148
    • /
    • 2006
  • The purpose of this study was to compare muscle activity in the lower extremity during walking wearing jogging and roller shoes. Twelve male middle school students (age: 15.0 yrs, height 173.7 cm, weight 587.7 N) who have no known musculoskeletal disorders were recruited as the subjects. Seven pairs of surface electrodes (QEMG8, Laxtha Korea, gain = 1,000, input impedance >$1012{\Omega}$, CMMR >100 dB) were attached to the right-hand side of the body to monitor the rectus femoris (RF), vastus medialis (VM), vastus lateralis (VL), biceps femoris (BF), tibialis anterior (TA), and medial (GM) and lateral gastrocnemius (GL) while subjects walked wearing roller and jogging shoes in random order at a speed of 1.1 m/s. An event sync unit with a bright LED light was used to synchronize the video and EMG recordings. EMG data were filtered using a 10 Hz to 350 Hz Butterworth band-passdigital filter and further normalized to the respective maximum voluntary isometric contraction EMG levels. For each trial being analyzed, five critical instants and four phases were identified from the recording. Averaged IEMG and peak IEMG were determined for each trial. For each dependent variable, paired t-test was performed to test if significant difference existed between shoe conditions (p<.05). The VM, TA, BF, and GM activities during the initial double limb stance and the initial single limb stance reduced significantly when going from jogging shoe to roller shoe condition. The decrease in EMG levels in those muscles indicated that the subjects locked the ankle and knee joints in an awkward fashion to compensate for the imbalance. Muscle activity in the GM for the roller shoe condition was significantly greater than the corresponding value for the jogging shoe condition during the terminal double limb stance and the terminal single limb stance. Because the subjects tried to keep their upper body weight in front of the hip to prevent falling backward, the GM activity for the roller shoe condition increased. It seems that there are differences in muscle activity between roller shoe and jogging shoe conditions. The differences in EMG pattern may be caused primarily by the altered position of ankle, knee, and center of mass throughout the walking cycle. Future studies should examine joint kinematics during walking with roller shoes.

Studies on the Quality of Domestic Industrial Products(I) (Jogger and Tennis shoes) (국내유통공산품(國內流通工産品)의 품질조사연구(品質調査硏究)(I) (조깅화와 테니스화))

  • Huh, D.S.;Kim, J.S.;An, B.K.;Seo, S.K.;Kim, K.J.
    • Elastomers and Composites
    • /
    • v.21 no.4
    • /
    • pp.309-322
    • /
    • 1986
  • This survey reports on the extensive examination of the qualify of 14 jogging and tennis shoes separately, availavable in the domestic market, Both jogging and tennis shoes were catagorised in two groups, namely the general goods(less expensive ones) and the exclusive goods(expensive models). The detailed classification are shown below; The domestic products meet the general purpose just as that of the foreign products. Due to the adhesion technology, the domestic tennis shoes consist of rubber sole with natural leather upper;In fact, the desirable combination, as foreign products, must be polyurethane/natural leather. The expensive models were heavier than the less expensive ones. The greater weight difference of right and left shoes are shown in the expensive models than that of the less expensive ones. The moisture absorption ratio of the expensive model is far superior in comparison with the less expensive model. The reason is identified by the material supplyed to produce the expensive model consisted of the natural leather and proper parts. The abrasion resistance of the expensive models were excellent that of the less expensive ones, because the rubber soles were showed the properties better than polyurethane sole which was used in the less expensive model.

  • PDF

Effects of wearing sweat suit on sweating rate (I) - During 30min jogging with the speed of 3.6miles/h and the room temp. of $22^{\circ}C$ - (땀복착용이 운동시 발한에 미치는 영향 (제1보) - 환경온 $22^{\circ}C$ 실내에서 3.6miles/h 속도로 30분 조깅시 -)

  • 정영옥
    • Korean Journal of Rural Living Science
    • /
    • v.9 no.1
    • /
    • pp.1-7
    • /
    • 1998
  • The purpose of this study is to investigate the effect of wearing sweat suit on sweating rate during jogging. 4 healthy female students served as subjects in the experimental chamber which was controlled 22$\pm$1$^{\circ}C$, 60$\pm$10%RH and no wind. The experimental clothes were Sweat Suit (SS) and General Suit (GE), SS was the product of R sports wear company which was consisted of long-sleeved jumper (100% polyester) and full length trousers (100% polyester) and GE were consisted of long sleeved shirt (100% cotton) and full length trousers (100% cotton). The subject wore same socks and shoes in both experimental clothes SS and GE. The subject reported at the experimental chamber at the same time on each experimental day. exchanged their clothes to the experimental clothes SS or GE, wore all sensors for the physiological measurements and had a rest in a sitting posture about 40 minutes. After rest, the subject carried out 30 min jogging on the tread mill with the speed 3.6miles/hour and during the jogging rectal temperature, skin temperatures (7 sites of the skin surface), heart rate, VO2, and evaporative weight loss were measured continuously and compared between two experimental clothes SS and GE. The major findings were as follows : The increase in rectal temperature during 30 min jogging was higher in experimental clothes SS than in GE and mean slim temperature kept higher in SS than in GE. VO2 and heart rate were a little bit higher in the later period of jogging in SS than in GE. The evaporative weight loss was greater in SS than in GE. These results indicate that the thermophysiological responses and sweating rate differs according to the wearing suit even though the subject performed same exercise.

  • PDF

The Study on effect of the Muscle Activities for Dietshoes (Backless) (다이어트신발(Barkless)이 근육 활성도에 미치는 영향에 관한 연구)

  • Lee, Chang-Min;Oh, Yeon-Ju;Lee, Kyung-Deuk;Park, Seung-Bum;Lee, Hoon-Sik
    • Korean Journal of Applied Biomechanics
    • /
    • v.16 no.3
    • /
    • pp.117-124
    • /
    • 2006
  • The modern convenient life formed by industrial development becomes lack of exercise and takes an interest in diet. Specially, professional walking shoes is developed as people take an interest in jogging, Those shoes, professional walking shoes or Dietshoes, increase exercise effects by change of heel types. Therefore, this study investigated motility effects by EMG experiment in order to measure Muscle Activities (MA) while wearing diet shoes (backless). Experiment was conducted by EMG measurement, from calf (gastrocnemius muscle), thigh (vastus muscle) and waist (erector spinae muscle), of 12 high school students. Exercise effects between the two shoes were analyzed by EMG (MF; Median Frequency, MPF; Mean Power Frequency, ZCR; Zero Crossing Rate). Results showed that the Dietshoes(MF: 48.21Hz, MPF: 65.0Hz, ZCR: 100.6Hz) had larger EMG value than that of Normal shoes(MF: 40.47Hz, MPF: 58.04Hz, ZCR: 82.09Hz). Also, in MA, the highest activities are showed in the calf, the second one is in waist, and last one is in thigh during gate. ANOVA between shoes in measurement parts showed significant effects in MF (gastrocnemius: p-value=.022, vastus laterals: p-value=.037, erector spinae: p-value=.082), MPF (gastrocnemius: p-value=.032, vastus laterals: p-value=.046, erector spinae: p-value=.090), and ZCR (gastrocnemius: p-value=.000, vastus laterals: p-value=.004, erector spinae: p-value=.134). And MA of Dietshoes is higher than that of Normal shoes, and decreasing rate of MA in Dietshoes is less than that of Normal shoes. Thus, this study validates exercise effects of Dietshoes.

The Desired Self-Images and the Fashion Product Unities of Male College Students according to Situation (남자대학생의 의복 착용상황별 추구이미지와 패션상품통일체)

  • Bae Hye-Jin;Chung Ihn-Hee
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.30 no.7 s.155
    • /
    • pp.1135-1145
    • /
    • 2006
  • The purpose of this study was to identify the desired seIf-images of male college students according to situations, and to construct fashion product unities bought by male college students for different situations. Empirical data were collected by self-administered questionnaires distributed to male students at 4 universities and 2 colleges in Daegu and Gyeongbuk area during June 2005, and 346 were analyzed, eliminating incomplete ones. Subjects were required to respond to 32 desired image words in 4 different situations respectively: school, meeting girlfriends, ceremonies, and exercises. As a result of factor analysis on desired self-image words, 5 factors were determined: refined image, sporty image, classic image, natural image and simple image. Based on the desired self-image factors, male college students were classified into 3 groups: selective image management group, passive image management group, and active Image management group. Fashion product unity of male college students for the school setting was consisted of round shirts, jeans, running shoes, bags and watches. Aloha shirts/knitted shirts/V-neck shirts, cotton pants/jeans/semi -formal pants, formal shoes/running shoes and watches were the fashion product unity for the setting of meeting girlfriends. For the setting of ceremonies, the fashion product unity included Y-shirts, formal dress, formal shoes, neckties and watches. And for the setting of exercises, the fashion product unity included cotton shirts, training suits, running shoes/jogging shoes/basketball shoes, armguard and caps.

A Study on the Effect of Arch Support for Improvement of Muscle Activity (운동효과 증진을 위한 Arch Support 효과에 관한 연구)

  • Lee, Chang-Min;Kim, Jin-Hoon;Oh, Yeon-Ju;Kim, Dae-Woong
    • Journal of the Ergonomics Society of Korea
    • /
    • v.27 no.3
    • /
    • pp.71-79
    • /
    • 2008
  • Walking shoes for walking and jogging have been used to enjoy lots of leisure time. Functional shoes such as walking shoes have special functions to improve body motility by changing of shoe shapes. The walking shoes could improve the motility by structural transformation of outsole as increase degrees of heel and toe. The study on insoles has not been conducted enough on the contrary of the study of outsole. The purpose of this study is to perform ergonomics analysis whether the Arch Supported insoles have an improving effect of muscle activities or not. Experiments were performed with 6 subjects who are health and haven't experienced any diseases past. EMG(Electromyography) and Foot Pressures were measured repeatedly for 5 seconds at 0 hour, after 1 hour and after 2 hours of walking. Insoles used for experiment are normal insole, insole inserted Arch Support and pad. The electrodes for EMG measurement were set on waist (erector spinae), and thigh (vastus lateralis), calf (gastrocnemius). Evaluations of EMG were analyzed by shift of MF (Median Frequency) and MPF (Mean Power Frequency). Foot Pressure was analyzed by mean pressure of feet and change of walking time. As results, Arch Support insole had larger frequency shift value than that of normal insole. Frequency shift between Arch Support insoles and normal insole showed significant difference on 95% confidence interval. And insole 1 has the highest value of frequency shift. For results of foot pressure, Arch Support insoles show continuous decreasing tendency when comparing with normal insoles by changing of times. Also, insole 1 has the highest decreasing value of foot pressure. Therefore, this study presented that the Arch Support insole can promote muscle activities and improves comfort for a prolonged walking.

Analysis of Ground Reaction Force with Different Soccer Studs (축구화 스터드의 형태변화에 따른 지면반력 분석)

  • Lee, Joong-Sook
    • Korean Journal of Applied Biomechanics
    • /
    • v.16 no.1
    • /
    • pp.119-128
    • /
    • 2006
  • This study was performed to see ground reaction force with different soccer studs with twelve players in Human Performance Laboratory(University of Calgary). Running speed was $4.0{\pm}0.2m/sec$ in straight running as well as vcut running. By using four different kinds of shoes; three different pairs of soccer shoes and one pair of jogging shoes, I reached a conclusion as following. In case of right and left ground reaction force, on the assumption that the positive magnitude of power is inversion and the negative is eversion, vcut running did not occur any inversion, which in the aspect of kinetic mechanics, thought to be decelerating movement. Because when eversion happens, it arises component force of power on heading direction about 8.6 times more than in the movement of straight running. In case of front and rear ground reaction, on the assumption that the positive magnitude of power is suspension power and the negative is propulsion, vcut movement is thought to be decelerating movement in the aspect of kinetic mechanics. Because on heading direction, this movement occurs component force of power about 1.8 times more suspension and 2.2 more propulsion than in the straight running movement. In case of vertical ground reaction, on the assumption that the first peak is the magnitude of power in impact and the second peak is the magnitude of power in active, we judged that the straight running movement performed more efficiently than the vcut movement in the aspect of kinetic mechanics. On the next study, I suppose that vcut running would make up an interesting subject in the aspect of improving kinetic performance ability.