• Smart Structures and Systems
• /
• v.16 no.2
• /
• pp.263-280
• /
• 2015

Microwave remote sensing is probably the most recent experimental technique suitable to the non-contact measurement of deflections on large structures, in static or dynamic conditions. In the first part of the paper, the main techniques adopted in microwave remote sensing are described, so that advantages and potential issues of these techniques are presented and discussed. Subsequently, the paper addresses the application of the radar technology to the measurement of the vibration response on the stay cables of two cable-stayed bridges. The dynamic tests were performed in operational conditions (i.e. with the excitation being mainly provided by micro-tremors, wind and traffic) and the maximum deflections of the cables were generally lower than 5.0 mm. The investigation clearly highlights: (a) the safe and simple use of the radar on site and its effectiveness to simultaneously measure the dynamic response of all the stay cables of an array; (b) the negligible effects of the typical issues and uncertainties that might affect the radar measurements; (c) the accuracy of the results provided by the microwave remote sensing in terms of natural frequencies and tension forces of the stay cables; (d) the suitability of microwave interferometry to the repeated application within Structural Health Monitoring programmes.

• Journal of the Korea Institute of Construction Safety
• /
• v.5 no.1
• /
• pp.17-24
• /
• 2023

The purpose of this study is to clearly recognize critical issues and to suggest relevant solutions for the issues since too many deaths and injuries due to industrial accidents has been going on for a long time, also the deaths of workers is a problem that affects not only one person's death but also many people connected with it and society as a whole. And the need for a strict Serious Accidents Punishment Act is sympathetic. However, the current Severe Accident Punishment Act is not welcomed by both labor and management due to its ambiguity, and it is suggested that the punishment and legislative content of the management manager who violated the duty to ensure safety and health is abstract and the level of punishment is excessive. In addition, due to the ambiguous part of the management manager's interpretation and serious industrial accidents, most companies appoint large law firms to receive legal interpretation and advice, so only law firms are getting full, and the cost that companies invest to protect the CEO is actually a safety accident. It is suggested that the current enforcement ordinance, which has ambiguity, needs to be revised because it must be entered into as a preventive cost.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.6
• /
• pp.145-153
• /
• 1995

An algorithm for the automatic generation of quadrilateral shell elements on three-dimensional sculptured surfaces has been developed, which is one of the key issues in the finite element analysis of structures with complex shapes such as automobile structures. Mesh generation on sculptured surfaces is performed in three steps. First a sculptured surface is transformed to a projection plane, on which the loops are subdivided into subloops by using the best split lines, and with the use of 6-node/8-node loop operators and a layer operator, quadrilateral finite elements are constructed on this plane. Finally, the constructed mesh is transformed back to the original sculptured surfaces. The proposed mesh generation scheme is suited for the generation of non-uniform meshes so that it can be effectively used when the desired mesh density is available. Sample meshes are presented to demonstrate the versatility of the algorithm.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.3
• /
• pp.36-43
• /
• 2016

Carbon fiber-reinforced silicon carbide (Cf-SiC) and SiC / SiC composites have high thermal conductivity, and excellent corrosion and wear resistance, a low coefficient for thermal expansion and are lightweight. This is why they are commonly used in parts of the aerospace industry to develop an aircraft thrust deflector, jet vane, combustion chamber, elevens, body flap, and a shingle. So, understanding how this state-of-the-art Cf-SiC affects both internal and external crack detection and determining issues during the manufacturing process of composite materials, should be evaluated according to valuation techniques in the external environment. In this paper, we apply a non-contact air ultrasonic technique of non-destructive testing techniques to perform a study on internal defect detection identification and assessment of carbon-fiber reinforced silicon carbide composites to perform basic research and applied research.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.6
• /
• pp.636-647
• /
• 2012

Construction projects have become so large, complicated and incredibly high-tech that process management is currently considered one of the most important issues. Unlike typical manufacturing industries, most major construction activities are performed in the open air and thus are exposed to various environmental factors. Many studies have been conducted with the goal of establishing efficient techniques and tools for overcoming these limitations. Productivity analysis and prediction, one of the related research subjects, must be considered when evaluating approaches to reducing construction duration and costs. The aim of this research is to present a quantified impact analysis of construction delay factors on construction productivity of a steel staircase system, which has been widely applied to high rise building construction. It is also expected to improve the process by managing the factors, ultimately achieving an improvement in construction productivity. To achieve the research objectives, this paper analyzed different delay factors affecting construction duration by means of multiple regression analysis focusing on steel staircase systems, which have critical effects on the preceding and subsequent processes in structure construction. Statistical analysis on the multiple linear regression model indicated that the environment, labor and material delay factors were statistically significant, with 0.293, 0.491, and 0.203 as the respective quantified impacts on productivity.

• Korean Journal of Construction Engineering and Management
• /
• v.3 no.4 s.12
• /
• pp.139-144
• /
• 2002

Management of today's dynamic projects requires a shift of focus from product to process. The purpose of traditional project controls is to conform performance to plan. The purpose of lean project controls is to make the best possible choices at each point in time during the course of the project, as well as contributing knowledge to the parent organizations so they can learn from project experience. The Lean Construction Institute(LCI) proposed the Last Planner System(LPS) capable of accomplishing that purpose, principally through controlling the quality of planning and of management processes themselves, as distinct from concentrating exclusively on project performance. The case project was a pilot project for the implementation of the Last Planner. Consequently, the coordination of the work on this project was extremely successful. The project had its share of challenges. The coordination did not prevent design problems, or supplier errors, but helped the team deal with the problems effectively while maintaining the work flow. The last planner helped the contractors know: a) who will be doing what and where, b) what each one needs from the others, and c) what are the project priorities. The system itself created a more collaborative environment, because it 'demands' that the subcontractors address these issues.

• Progress in Superconductivity and Cryogenics
• /
• v.16 no.2
• /
• pp.7-19
• /
• 2014

Since the discovery of iron-based superconductors in 2008, extensive and intensive studies have been performed to find the microscopic theory for the high temperature superconductivity in the materials. Electronic structure is the basic and essential information that is needed for the microscopic theory. Experimentally, angle resolved photoelectron spectroscopy (ARPES) is the most direct tool to obtain the electronic structure information, and therefore has played a vital role in the research. In this review, we review what has been done so far and what is needed to be done in ARPES studies of iron-based superconductors in search of the microscopic theory. This review covers issues on the band structure, orbital order/fluctuation, and gap structure/symmetries as well as some of the theories.

• ETRI Journal
• /
• v.43 no.3
• /
• pp.471-482
• /
• 2021

Several code-division multiple access (CDMA)-based interconnect schemes have been recently proposed as alternatives to the conventional time-division multiplexing bus in multicore systems-on-chip. CDMA systems with a dynamic assignment of spreading codewords are particularly attractive because of their potential for higher bandwidth efficiency compared with the systems in which the codewords are statically assigned to processing elements. In this paper, we propose a novel distributed arbitration scheme for dynamic CDMA-bus-based systems, which solves the complexity and scalability issues associated with commonly used centralized arbitration schemes. The proposed arbitration unit is decomposed into multiple simple arbitration elements, which are connected in a ring. The arbitration ring implements a token-passing algorithm, which both resolves destination conflicts and assigns the codewords to processing elements. Simulation results show that the throughput reduction in an optimally configured dynamic CDMA bus due to arbitration-related overheads does not exceed 5%.

• Asia pacific journal of information systems
• /
• v.23 no.2
• /
• pp.67-86
• /
• 2013

This study first provides a stylized model that captures the essential features of the SC (Social Commerce) business and the competition process. The model focuses on the relationship between key decision issues such as marketing inputs and market value. As more SCs join the industry, they are inevitably faced with fierce competition, which may lead to sharp increase in the total marketing and advertising expenditure. This type of competition may lead the industry away from its optimal development path, and at worst, toward a disruption of the entire industry ecosystem. Such being the case, another goal of this study is to examine the possibility that the ToC (Tragedy of the Commons) may occur in the SC industry. We build game models, each of which assumes homogeneity and heterogeneity of SC providers, respectively, and derive explicit equilibrium solutions from both models. Our basic analysis presents Nash equilibria in both models and shows that SC providers are inevitably faced with fierce competition, which may lead to sharp increase in the total marketing expenses. We also compare the game outcomes with one with a hypothetical social planner who determines the total marketing level that optimizes the entire market value. Then, ToC can be defined to describe the situation where the total marketing efforts exceed the socially optimal level of marketing efforts. In both models, we examine the possibility of the ecosystem disruption and specify the conditions under which ToC may occur. However, the chance of avoiding ToC is higher with heterogeneous players than with homogeneous players. To supplement our analytical results, we develop a simulation model which incorporates a market dynamics based on the gap between actual marketing efforts and socially optimal marketing level. Simulation experiments present some lessons and insights which also confirm out findings from equilibrium analysis. For example, heterogeneity in SC providers alleviates the severity of ToC and makes it faster for survivors to escape from the ToC trap. As a result, the degree of industrial concentration tends to increase, which also explains the 'rich-get-richer' phenomenon observed in some empirical studies on the SC industry. Lastly, based on our analytical and experimental results, we come up with some measures to avoid ToC and overcome the shortcomings intrinsic to the current business model. And further discussions provide strategic implications and policy directions to overcome the possible trap of ToC in this ecosystem, and eventually help the industry to sustainably develop itself toward the next level. To name a few examples of policy measures, regulations on the marketing activities so that the overall marketing expenses cannot go beyond the socially optimal level; institutional guidelines and rules to straightening up the distortions in the way that SC providers view the marketing costs (the current marketing costs are underestimated, thereby encouraging SC providers to increase marketing expenditure); and so on.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.5
• /
• pp.211-216
• /
• 2018

The recovery of rare earth elements (REE) including La, Nd and Ce from spent batteries is important issues to reuse scarce resources. Herein, we present a simple recovery process to obtain lanthanum oxide ($La_2O_3$) from spent Ni-MH batteries, and demonstrate the conversion mechanism from $NaLa(SO_4)_2{\cdot}H_2O$ to $La_2O_3$. This strategy requires the initial preparation of $NaLa(SO_4)_2{\cdot}H_2O$ and subsequent metathesis reaction with $Na_2CO_3$ at $70^{\circ}C$. This metathesis reaction resulted in the crystalline lanthanum carbonate hydrate ($La_2(CO_3)_3{\cdot}xH_2O$) powder with plate-like morphology. On the basis of TGA result, the $La_2(CO_3)_3{\cdot}xH_2O$ powder was calcined in air at three different temperatures, that is, $300^{\circ}C$, $500^{\circ}C$, and $1000^{\circ}C$. As the calcination temperature increased, the morphology of powder was changed; prism-like ($NaLa(SO_4)_2{\cdot}H_2O$) ${\rightarrow}$ platelike ($La_2(CO_3)_3{\cdot}xH_2O$) ${\rightarrow}$ aggregated irregular shape ($La_2O_3$). Futhermore, XRD results indicated that the crystalline $La_2O_3$ could be synthesized after the metathesis reaction with $Na_2CO_3$, followed by heat-treatment at $1000^{\circ}C$, along with a change of crystallographic structures; $NaLa(SO_4)_2{\cdot}H_2O$ ${\rightarrow}$ $La_2(CO_3)_3{\cdot}xH_2O$ ${\rightarrow}$ $La_2O_3$.