• 한국정밀공학회지
• /
• 제28권10호
• /
• pp.1181-1188
• /
• 2011

A control system for stabilizing a small robot or inverted pendulum using twisted gyro wheel is proposed. Conventional stabilizer using inertial wheel employs action-reaction force/torque to control a pendulum, which can generate relatively small torque and short period of output. In this paper, a novel actuation method using twisted gyro torque in 3-dimentional space was proposed to stabilizing a pendulum by twisting the assembly including a rotating gyro wheel. In addition, two special control functions for this type of twisted gyro wheel were designed. One is the function of self-adjusting the mass center of the robot and the other is the torque reloading configuration for continuous torque generation. The proposed system was verified by experimental result and simulation. The designed twisted gyro wheel control system can be easily packed in a small size module and installed in a humanoid robot or inverted pendulum type mechanism.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.646-651
• /
• 2004

This paper deals with a new adaptive fuzzy sliding mode controller and its application to an inverted pendulum. We propose new method of adaptive fuzzy sliding mode control scheme that the fuzzy logic system is used to approximate the unknown system functions in designing the SMC of uncertain nonlinear systems. The controller's construction and its analysis involve sliding modes. The proposed controller consists of two components. Sliding mode component is employed to eliminate the effects of disturbances, while a fuzzy model component equipped with an adaptation mechanism reduces modeling uncertainties by approximating model uncertainties. To demonstrate its performance, the proposed control algorithm is applied to an inverted pendulum. The results show that both alleviation of chattering and performance are achieved

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제11권1호
• /
• pp.12-18
• /
• 2011

This paper deals with a new adaptive fuzzy sliding mode controller and its application to an inverted pendulum. We propose a new method of adaptive fuzzy sliding mode control scheme that the fuzzy logic system is used to approximate the unknown system functions in designing the SMC of uncertain nonlinear systems. The controller's construction and its analysis involve sliding modes. The proposed controller consists of two components. Sliding mode component is employed to eliminate the effects of disturbances, while a fuzzy model component equipped with an adaptation mechanism reduces modeling uncertainties by approximating model uncertainties. To demonstrate its performance, the proposed control algorithm is applied to an inverted pendulum. The results show that both alleviation of chattering and performance are achieved.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권10호
• /
• pp.457-463
• /
• 2001

This paper presents a simple and new digital redesign algorithm for fuzzy-model-based controllers. In the first stage, a continuous-time TS fuzzy model is constructed for a given continuous-time nonlinear system and a corresponding continuous-time fuzzy-model-based controller is established based on the existing controller synthesis algorithms. In the second stage, the continuous-time fuzzy-model-based controller is converted to equivalent discrete-time fuzzy-model-based controller, aiming at maintaining the property of the analogue controlled system, which are called intelligent digital redesign. Finally, the proposed method is applied to the digital control of inverted pendulum system to shows the effectiveness and the effectiveness and the feasibility of the method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1470-1473
• /
• 2003

In this paper the networked control systems (NCS) problem is discussed where plants and controllers are distributed and interconnected by a common network. NCS is designed with LQ regulator and applied to an inverted pendulum accounting for the multiple time delays. We are to deals with a networked control system with a single controller, multiple sensors and multiple actuators. Since these parts are distributed, they are interconnected by communication networks. An NCS with LQ regulator is designed and applied to an inverted pendulum as a benchmark plant to check its performance under time delays induced by the network. Network induced delays are composed of two parts. One is the delay from controller to plant, and another is from plant to controller. They are assumed to be constant in this paper, and the plant and controller are discretized. To apply the LQ regulator the NCS model is transformed to a standard model with delayed states as state variable. And real network induced delay is measuring in TCP/IP network assuming that two delays are constant.

• 한국정보통신학회논문지
• /
• 제16권3호
• /
• pp.432-439
• /
• 2012

본 논문에서 이륜 역진자 로봇의 밸런싱에 사용되고 있는 기존 PD 제어기를 대신하여 신경회로망 학습을 통해 향상된 PD 제어기를 이륜 역진자형 이동로봇에 적용하여 실험하고 성능을 검증하였다. 먼저 제어실험에 사용할 이륜 역진자 로봇시스템을 구축하고 나서 기존의 PD 제어기를 사용하여 사용자 몸무게에 따라 시행착오적으로 이득값을 구해 로봇을 밸런싱시켰다. 그리고 시행착오적으로 구한 이득 값을 신경회로망 학습을 통해 일반화시켜 몸무게에 따라 일반화된 PD 이득 값을 가지는 제어기를 구현하였다. 이렇게 구현된 제어기가 기존의 PD 제어기보다 안정적 제어 측면에서 더 유리함을 실험적으로 확인할 수 있었다.

• 융합신호처리학회논문지
• /
• 제5권4호
• /
• pp.301-307
• /
• 2004

본 논문에서는 Takagi-Sugeno(T-S) 퍼지모델에 대한 가변구조제어방식을 제안하며 이를 이용한 바퀴구동 도립 진자의 자세제어를 보인다. 비선형 시스템이 T-S 퍼지모델로 모델링 될 수 있다는 가정 하에서 바퀴구동 도립진자에 대하여 몇 개의 대표 동작점을 기준으로 시스템을 선형화하여 퍼지모델을 얻고 이를 통해 가변구조제어이론을 도입하여 제어기를 설계한다. 제안된 제어법칙은 퍼지모델을 구성하는 각각의 선형 부 시스템의 입력이득 행렬을 동일한 행렬로 단일화하고 그 단일화된 제어이득행렬을 토대로 설계되어진다. 이득행렬의 단일화 과정에서 생성되는 불확실성은 가변구조제어 이론의 입력 외란으로 해석되어질 수 있으며 이러한 단일화 외란은 기존 가변구조제어의 강인성에 의해 해결되어질 수 있다. 바퀴구동 도립진자 시스템 예를 통해 제안된 제어알고리즘의 타당성과 유용성을 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2309-2311
• /
• 1998

The attitude control of a double inverted pendulum with a periodical disturbance at link top is dealt in this paper. The proposed system is consisted of the double inverted pendulum and a disturbance link. The lower link is hinged on the plate to free for rotation in the vertical plane. The upper link is connected to the lower link through a DC motor. The DC motor is used to control the posture of the pendulum by adjusting the position of the upper link. The periodical disturbance can be generated by the additional link attached at the end of link 2 through another DC motor, which is the modeling of a posture for a biped supporting with one leg. The motor for the joint simulates the knee joint(or hip joint) and the disturbance for the legs moving in air. The algorithm for controlling a proposed inverted pendulum is consisted of a state feedback control and a fuzzy logic controller. The fuzzy controller keeps the center of gravity of the biped within the specified range through the nonlinear feedback compensator. The state feedback control takes over the role to maintain a desired posture regardless the disturbance at the link top. In these case, the change of the angle and COG of an upper link is compensated with on-line. Simulations with a mathematical model are conducted to show the validity of the proposed controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2143-2145
• /
• 2002

This paper proposes the control problem of an inverted pendulum system based on adaptive fuzzy sliding mode. The universal approximating capability, learning ability, adaptation capability and disturbance rejection are collected in one control strategy. The proposed scheme does not require an accurate dynamic model and the joint acceleration measurement, yet it guarantees asymptotic trajectory tracking. Experimental results perform with an inverted pendulum to show the effectiveness of the approach.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1289-1292
• /
• 1993

Though fuzzy control is very popular at present, the application field of fuzzy system will be wider if we design it as a man-machine system. We suggest, in this paper, a man-machine cooperating system which makes easy the manual control of a triple inverted pendulum by simple fuzzy controller, and verify its effectiveness by experiments.