• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.307-310
• /
• 1998

Finite element analysis was investigated on the stress distribution at the 2-D model of piezoelectric ceramic actuators. The y direction maximum stress decreased with a(internal electrode gap) size until 0.4 mm and is not much difference with c(external electrode thickness) size. The stress distribution with internal layers is almost same, and the stress distribution of load condition is higher than that of no load condition. The y direction maximum stress increased exponentially with the number of layer and saturated at 260 layers. In the case of defective actuator, the stress distribution is smaller than that of normal actuator.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.21 no.2
• /
• pp.113-132
• /
• 2005

The purpose of this study was to assess the stress-induced pattern at the supporting bone, the implant fixture, the abutment and the abutment screw according to a friction-fit joint (Astra; Model 1) or slip- fit joint (Frialit-2; Model 2) in the internal connection system under vertical and inclined loading using finite element analysis. In conclusion, in the internal connection system of the implant and the abutment connection methods, the stress-induced pattern at the supporting bone, the implant fixture, the abutment and the abutment screw according to the abutment connection form had difference among them, and the stress distribution pattern usually had a widely distributed tendency along the inner surface of the implant fixture contacting the abutment post. The magnitude of the stress distributed in the supporting bone, the implant fixture, the abutment and the abutment screw was higher in the friction-fit joint than in the slip-fit joint. But it is considered that the further study is necessary about how this difference in the magnitude of the stress have an effect on the practical clinic.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.1
• /
• pp.55-74
• /
• 2006

The external contour of an implant can have significant effects on the load transfer characteristics and may result in different bone failure rates for different implant system. The purpose of this study was to investigate the effects of crest module shape and occlusal load direction on bone failure modes of five commercially available dental implant systems. Five different implant systems with internal connection; ITI (Model 1), Astra (Model 2), Bicon (Model 3), Friadent (Model 4), and Paragon (Model 5), comparable in size, but different in thread profile and cest module shapes, were compared using the finite element method. Conclusively, in the internal connection system of the implant-abutment connection methods, the stress-induced pattern at the supporting bone according to the abutment connection form had differenence among them, and implants with narrowing crestal module cross-sections at the top of the cortical bone created more favorable load transfer characteristics in this region. But it is considered that the future study is necessary about how this difference in the magnitude of the stress have an effect on the practical clinic.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2252-2258
• /
• 2000

In order to investigate the effect of nozzle on stress concentration in pressure vessels, three dimensional finite element analyses were performed. The results were compared with those for corresponding two dimensional axisymmetric finite element analyses. A three dimensional finite element model with a surface crack was also designed to evaluate the effect of internal pressure and heat transfer on crack face, and the resulting stress intensity factors from the finite element analyses were compared with those for ASME Sec. XI and Raju-Newman's stress intensity factor solution. As a result, the validity of currently available stress intensity factor solutions for a surface crack was reviewed in the presence of geometrical complexity, heat transfer and internal pressure.

• Journal of the Korean Society of Safety
• /
• v.28 no.5
• /
• pp.54-60
• /
• 2013

In this study, a finite element model based on the SU/PG scheme was developed to solve shallow-water equations and the influences of parameters and internal boundary conditions on depth-averaged flow behavior were investigated. To analyze the effect of roughness coefficient and eddy viscosity on flow characteristics, the developed model was applied to rectangular meandering channel with two bends, and transverse velocities and water depth distributions were examined. As the roughness coefficient adjacent to wall increased, the velocities near the wall decreased, and the reduced velocities were compensated by the expanding mid-channel velocities. In addition, the flow characteristics around a circular cylinder were analyzed by varying the internal boundary conditions as free slip and no slip. The assignment of slip condition changed the velocity distribution on the cylinder surface and reduced the magnitude of the shear stress up to one third.

• Korean Journal of Child Studies
• /
• v.26 no.4
• /
• pp.157-171
• /
• 2005

Causal relationships between school maladjustment and related variables were examined in 371 5th grade elementary school students. School maladjustment was ascertained by revised the School Adjustment Test(Lim, 1993; Song, 1999). After analysis of differences in internal locus of control, academic stress, and academic achievement between the school maladjusted and adjusted groups, the study built a structural equation model of school maladjustment-related variables goodness of fit was tested with LISREL 8 for Windows. Significant differences were found in internal locus of control, academic stress, and academic achievement by level of school maladjustment. Internal locus of control, academic stress, and academic achievement both directly and/or indirectly influenced school maladjustment. These variables explained 64% of the variances in school maladjustment.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.436-444
• /
• 1991

A computational method has been developed to analyze the bone-remodeling induced by external fixator. The method was based on the Finite Element Method (FEM) in combination with numerical formulation of adaptive bone-remodeling theories. As a feed-back control variable, compressive strain and effective stress were used to determine the surface remodeling and internal (density) remodeling respectively. Surface remodeling and internal remodeling were combined at each time step to predict the rel situation. A noticeable shape and density change were detected at the region between two pins and density change was decreased with time increment. At final time step, the shape and density distribution were converged closely to its original intact bone model. Similar change was detected in stress distribution. The altered stress distribution due to the pin and external fixator converged to the intact stress distribution with time.

• Tribology and Lubricants
• /
• v.37 no.4
• /
• pp.136-143
• /
• 2021

This paper presents the loosening behavior that occurs after the application of an external load to internal and external connection types of dental implants using the finite element method. We use fastening force between an abutment and a fixture to clamp the dental implant system; however, loosening and breakage may occur owing to cyclic external loads. In this study, we considered the initial fastening condition in the pre-load analysis and then investigated the change in stress and contact surface status when applying external loads. After the application of the initial fastening load, we verified that the internal connection-type model exhibited a relatively lower stress distribution than that of the external connection-type one. Moreover, we found that the former model showed a lower stress concentration after the application of the external load. In addition, after the application of this load, we found that the higher the shear load acting on the implant system, the higher the possibility of loosening. The study results showed the change in stress distribution and contact surface according to the connection type of the dental implants and the phenomenon of loosening by cyclic loads. We expect that the results of this study will be useful for the study of reliability and design of dental implant systems.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1575-1588
• /
• 2019

Fracture near the U-10Mo/cladding material interface impacts fuel service life. In this work, a mesoscale stress model is developed with the fuel foil considered as a porous medium having gas bubbles and bearing bubble pressure and surface tension. The models for the evolution of bubble volume fraction, size and internal pressure are also obtained. For a U-10Mo/Al monolithic fuel plate under location-dependent irradiation, the finite element simulation of the thermo-mechanical coupling behavior is implemented to obtain the bubble distribution and evolution behavior together with their effects on the mesoscale stresses. The numerical simulation results indicate that higher macroscale tensile stresses appear close to the locations with the maximum increments of fuel foil thickness, which is intensively related to irradiation creep deformations. The maximum mesoscale tensile stress is more than 2 times of the macroscale one on the irradiation time of 98 days, which results from the contributions of considerable volume fraction and internal pressure of bubbles. This study lays a foundation for the fracture mechanism analysis and development of a fracture criterion for U-10Mo monolithic fuels.

• Korean Journal of Oriental Medicine
• /
• v.3 no.1
• /
• pp.119-151
• /
• 1997

Conclusions for the relationship between a conceptional model of stress theory and its examination based on the Oriental medicine; 1. It was considered that a general conception of stress is included into the meaning of Ki in the Oriental medicine. 2. The response-based model to stress could be comparable to a conception of Ki-pathogens interchange In the Onental medicine. 3. The stimulus-based model may be explained as a modern conception of immoderation feeling related with an internal etiological factor, specially injury of seven emotions, among three groups of etiological factors for disease. 4. The feedback conception based on the interaction model could explain the principal of reversible emotion therapy in the nine Ki. 5. In the Oriental medicine, a study to clarify a emotional etiologic factor and its pathophysiologlcal mechanism has been continued for long time before establishment of stress theory.