• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.132-137
• /
• 2004

On-Board Diagnostic(OBD) systems are in most cars and light trucks on the load today. During the 1970's and early 1980's manufacturers started using electronic means to control engine functions and diagnose engine problems. The CARB's diagnostic requirements to meet EPA emission standards have been designated as OBD with a goal of monitoring all of the emissions-related components, as well as the chassis, body, accessory devices and the diagnostic control network of the vehicle for proper operation. In this paper, we present a remote measurement system for the wireless monitoring of diagnosis signal and sensors output signals of ECU adopted KWP2000, united the OBD communication protocol, on OBD-compliant vehicle using the wirless communication technique of Bluetooth. In order to measure the ECU signals, the interface circuit is designed to communicate ECU and designed terminal wirelessly according to the ISO, SAE regulation of communication protocol standard. A microprocessor S3C3410X is used for communicating ECU signals. The embedded system's software is programmed to measure the ECU signals using the ARM compiler and ANCI C based on MicroC/OS kernel to communicate between bluetooth modules using bluetooth stack. The diagnostic system is developed using Visual C++ MFC and protocol stack of bluetooth for Windows environment. The self-diagnosis and sensor output signals of ECU is able to monitor using PC with bluetooth board connected in serial port of PC. The algorithms for measuring the ECU sensor output and self-diagnostic signals are verified to monitor ECU state. At the same time, the information to fix the vehicle's problem can be shown on the developed monitoring software. The possibility for remote measurement of self-diagnosis and sensor signals of ECU adopted KWP2000 in embedded system verified through the developed systems and algorithms.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.1
• /
• pp.1-9
• /
• 2004

In this paper, we proposed a hardware(H/W) structure which can compress and recontruct the input image in real time operation and implemented it into a FPGA platform using VHDL(VHSIC Hardware Description Language). All the image processing element to process both compression and reconstruction in a FPGA were considered each of them was mapped into a H/W with the efficient structure for FPGA. We used the DWT(discrete wavelet transform) which transforms the data from spatial domain to the frequency domain, because use considered the motion JPEG2000 as the application. The implemented H/W is separated to both the data path part and the control part. The data path part consisted of the image processing blocks and the data processing blocks. The image processing blocks consisted of the DWT Kernel for the filtering by DWT, Quantizer/Huffman Encoder, Inverse Adder/Buffer for adding the low frequency coefficient to the high frequency one in the inverse DWT operation, and Huffman Decoder. Also there existed the interface blocks for communicating with the external application environments and the timing blocks for buffering between the internal blocks. The global operations of the designed H/W are the image compression and the reconstruction, and it is operated by the unit or a field synchronized with the A/D converter. The implemented H/W used the 54％(12943) LAB(Logic Array Block) and 9％(28352) ESB(Embedded System Block) in the APEX20KC EP20K600CB652-7 FPGA chip of ALTERA, and stably operated in the 70MHz clock frequency. So we verified the real time operation. that is. processing 60 fields/sec(30 frames/sec).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.2 s.344
• /
• pp.51-59
• /
• 2006

Von Neumann architecture suffers from the interface between the central processing unit and the memory, which is called 'Von Neumann bottleneck' In this paper, we propose a scalable general-purpose associative processor (AP) based on content-addressable memory (CAM) which solves this problem and is suitable for the search-oriented applications. We propose an efficient instruction set and a structural scalability to extend for larger applications. We define twelve instructions and provide some reduced instructions to speed up which execute two instructions in a single instruction cycle. The proposed AP performs in a bit-serial, word-parallel fashion and can be considered as a 32-bit general-purpose parallel processor with a massively parallel SIMD structure. We design and simulate a maximum/minumum search greater-than/less-than search, and parallel addition to verify the proposed architecture. The algorithms are executed in a constant time O(k) regardless of the number of input data.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.22-30
• /
• 2010

KARI had integrated and tested GEO satellite in cooperation with Astrium Inc., France. In the middle of integration and test, It was necessary to check GEO satellite SA(solar array) status and require electrical interface verification with bus. SA of GEO satellite have different mechanical characteristics in comparison with those of LEO satellite which was tested in KARI. LEO SA has been deployed by simple mechanical hinge system but GEO SA has been done by more complicated method. so in this paper, we designed the test configuration and analyzed the test result of solar array electrical integration of GEO satellite.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.1
• /
• pp.33-40
• /
• 1988

The new technique has been used to determine the soil-reinforcement interaction. The testing apparatus is essentially a triaxial cell fitted with the capability to house a hollow cylinderical sample. A hollow cylinderical sand specimen with a concentrical layer of reinfarcing material sandwitched in the middle is used in this investigation. The reinforcement is fastened at the base. The hollow specimen can be viewed as a "unit sheet" of a soil-reinforcement composite system of infinite horizontal extent. Axial load as well as inner and outer chamber pressures can be applied to perform a test. The specimen is first subjected to an isotropic stress state corresponding to the overburden pressure. Next, an extension test by reducing the axial load is carried out. The specimen is "loaded" to failure by either the breakage of reinforcing material (tensile failure) or slippage which takes place at the soil-reinforcement interface (i.e. the overcoming of the bonding capacity). Since the reinforcement is fastened at its lower end to the base, any tendency of relative movement between the reinforcement and the sand during an extension test can induce tensile force in the reinforcement thus forming a "reversed pull-out" test condition. Preliminary test results have demonstrated positively of the new approach to test the soil-reinforcement interaction. Reinforcing elements of different extensibility were used to study the deformbility of reinforced soil. Furthermore, both the breakage and the pull-out modes of failure were observed.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.425-435
• /
• 1996

The effect of application of dentin bonding agent to the exposed dentin on the intradental nerve activity (INA), dentinal fluid movement and sealing of the dentinal tubules, was investigated in this study. The INA was recorded from the single pulp nerve unit dissected from the inferior alveolar nerve. And specimen of dentin was observed by SEM. Dentinal fluid 'movement through exposed dentin surface was measured before and after the application of dentin bonding agent. 1. Eight Ao-fiber units (conduction velocity: $8.0{\pm}4.0m$/sec) were identified. 4M NaCl evoked an irregular burst of action potentials which ceased immediately after washing. 2. In 4 $A{\delta}$-fiber units, appliction of All Bond 2 completely abolished the INA induced by 4M NaCl. Also, application of Scotchbond Multipurpose(SBMP) totally abolished the INA induced by 4M NaCl in 4 $A{\delta}$-fiber units. 3. Before the application of dentin bonding agent, outward dentinal fluid movement of $10.2{\pm}5.7\;pl{\cdot}s^{-1}{\cdot}mm^{-2}$ was obsered. But after the application of dentin bonding agent the movement of dentinal fluid was stopped. 4. The gap width of 2-$3{\mu}m$ was formed between exposed dentin and adhesive resin in the specimens applied with dentin bonding agents of All Bone 2 and SBMP. But the formation of hybrid layer and the penetration of resin into were dentinal tubules were not clearly observed in interface between dentin and adhesive resin.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.437-444
• /
• 2014

The integrated modular avionics (IMA) system has quite a number of line repalceable moduels (LRMs) in a cabinet. The LRM performs functions like line replaceable units (LRUs) in federated architecture. The video processing module (VPM) acts as a video bus bridge and gateway of ARINC 818 avionics digital video bus (ADVB). The VPM is a LRM in IMA core system. The ARINC 818 video interface and protocol standard was developed for high-bandwidth, low-latency and uncompressed digital video transmission. FPGAs of the VPM include video processing function such as ARINC 818 to DVI, DVI to ARINC 818 convertor, video decoder and overlay. In this paper we explain how to implement VPM's Hardware. Also we show the verification results about VPM functions and IP core performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.909-916
• /
• 2015

Recently, as shown demands and the need for Cloud dig data, large-scale data centers, as well as factory unit's have also vigor. This study focuses the system design that can integrate various facilities on the data center build upon of the factory and the midsize group. Because the integrated facilities management of midsize groups should have variety of sensors and devices requires integrated monitoring system that can manage them as a whole. In this study, it constitutes a integrated model protocol interface of the various facilities, it suggests ways to avoid the errors that may occur during design to study the development and systematically carried out. For this purpose, this study provides the analysis of a failure information delivery time and integration scenario for efficient analysis and evaluation of an integrated monitoring system.

• Journal of KIISE:Software and Applications
• /
• v.31 no.8
• /
• pp.980-990
• /
• 2004

The component-based development methodology aims at the high state of abstraction and the reusability with components larger than classes. It is indispensible to measure the component so as to improve the quality of the component-based system and the individual component. And, the quality of the component should be improved through putting the results into the process of the development. So, it is necessary to study the component metric which can be applied in the stage of the component analysis and design. Hence, in this paper, we propose component cohesion, coupling, independence metrics reflecting the information extracted in the step of component analysis and design. The proposed component metric bases on the similarity information about behavior patterns of operations to offer the component's service. Also, we propose the redesigning process for the improvement of component design. That process uses the techniques of clustering and is for the thing that makes the component as the independent functional unit having the low complexity and easy maintenance. And, we examine that the component design model can be improved by the component metrics and the component redesigning process.

• Atmosphere
• /
• v.17 no.4
• /
• pp.339-348
• /
• 2007

Global Environment Laboratory at Yonsei University in Seoul ($37.57^{\circ}N$, $126.95^{\circ}E$) has carried out the ozone layer monitoring program in the framework of the Global Ozone Observing System of the World Meteorlogical Organization (WMO/GAW/GO3OS Station No. 252) since May of 1984. The daily measurements of total ozone and the vertical distribution of ozone amount have been made with the Dobson Spectrophotometer (No.124) on the roof of the Science Building on Yonsei campus. From 2004 through 2006, major parts of the manual operations are automated in measuring total ozone amount and vertical ozone profile through Umkehr method, and calibrating instrument by standard lamp tests with new hardware and software including step motor, rotary encoder, controller, and visual display. This system takes full advantage of Windows interface and information technology to realize adaptability to the latest Windows PC and flexible data processing system. This automatic system also utilizes card slot of desktop personal computer to control various types of boards in the driving unit for operating Dobson spectrophotometer and testing devices. Thus, by automating most of the manual work both in instrument operation and in data processing, subjective human errors and individual differences are eliminated. It is therefore found that the ozone data quality has been distinctly upgraded after automation of the Dobson instrument.