• Journal of the Korean GEO-environmental Society
• /
• v.16 no.2
• /
• pp.45-52
• /
• 2015

To minimize the cost of maintenance, repair and over-design of track substructure, an accurate evaluation of strength and stiffness of the track substructure is necessary. In this study, a cone penetrometer with impact penetration rod (CPI) is developed for the evaluation of track substructure. For applicability test, the chamber and field tests were performed. As the experimental results of the CPI, dynamic cone penetration endex (DCPI), cone tip resistance ($q_c$), friction resistance ($f_s$) and friction ratio (Fr) were obtained. In the chamber test, the experimental results show reasonable values for the simulated track substructure. In the field test, the CPI clearly detects the interface between the ballast and the subgrade. Also, discontinuous layers are detected in the subgrade. It is expected that the developed CPI may be an effective tool for the evaluation of track substructure by evaluating the ballast layer by dynamic penetration and the subgrade by static penetration of the inner rod.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.10
• /
• pp.13-23
• /
• 2011

Bearing capacity of pile foundations in cold region is dominated by adfreeze bond strength between surrounding soil and pile perimeter. It denotes that adfreeze bond strength is the most important design parameter for foundations in cold region. Adfreeze bond strength is affected by various factors like 'soil type', 'frozen temperature', 'normal stress acting on soil/pile interface', 'loading rate', 'roughness of pile surface', etc. Several methods have already been proposed to estimate adfreeze bond strength during past 50 years. However, most methods have not considered the effect of normal stress for adfreeze bond strength. In this study, both freezing temperature and normal stress have been controlled as primary factors affecting adfreeze bond strength. A direct shear box was used to measure adfreeze bond strength between sand and aluminum under different temperature conditions. Based on the test results, the relation between shear strength of frozen sand and adfreeze bond strength have been investigated. The test results showed that both of shear strength and adfreeze bond strength tend to increase with decreasing frozen temperature or increasing confining pressure. The ratio of shear strength and adfreeze bond strength, expressed as $r_s$, decreased initially frozen section but increased at much lower frozen temperature and there were uniform intervals under the different normal stress conditions. A method for predicting adfreeze bond strength using $r_s$ has finally been proposed in this study.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.2
• /
• pp.96-105
• /
• 2011

Ubiquitos sensor network(USN) is a technology which is widely used in our life. This paper introduces an example of design and implementation for a system which is based on the USN technology and can provide an efficient management tool for a space that should be precisely controlled for a certain range of uniformity in temperature and humidity. This introduced system builds a wireless sensor network using a number of sensor modules that are equipped with temperature and humidity sensors, and collects temperature and humidity information in real-time while simultaneously providing a method for monitoring the status of temperature and humidity by the graphical user interface. Also, the system will give a warning signal if the monitored values are differ from the pre-specified values of temperature and humidity for each sensor module more than a certain amount of tolerance. This temperature and humidity logging and monitoring system can perform better management for the space easily and efficiently by automating the existing manual method for data collection and management. Furthermore, using the stored data, it can make possible to perform post-analysis on the problems caused by temperature and humidity and to obtain information for environmental enhancement for the space.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.4
• /
• pp.104-113
• /
• 2012

Followed by that HTML5(Hypertext Markup Language5) was introduced, many kinds of program and services based on this have been developed and released. HTML5 is technical standard specifications for cross platform for personal computers and mobile devices so that it is expected that continuing progress and wide application in the both sides of the academic and the industrial fields increase. This study is to design and implement a mobile application program for overlay rendering with DEM and other geo-based image sets using HTML5 WebGL for 3D graphic processing on web environment. Particularly, the blending technique was used for overlay processing with multiple images. Among available WebGL frameworks, CubicVR.js was adopted, and various blending techniques were provided in the user interface for general users. For the actual application in the study area around the Sejong city, serveral types of geo-based data sets were used and processed: KOMPSAT-2 images, ALOS PALSAR SAR images, and grid data by environment measurements. While, DEM for 3D viewing with these geo-based images was produced using contour information of the digital map sets. This work demonstrates possibilities that new types of contents and service system using geo-based images can be extracted and applied.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.4
• /
• pp.128-136
• /
• 2011

To monitor and predict the change of coastal environment according to the construction of Saemangeum sea dyke and the development of land reclamation, we have done real-time and periodic ocean observation and numerical simulation since 2002. Saemangeum coastal environmental data can be largely classified to marine meteorology, ocean physics and circulation, water quality, marine geology and marine ecosystem and each part of data has been generated continuously and accumulated over about 10 years. The collected coastal environmental data are huge amounts of heterogeneous dataset and have some characteristics of multi-dimension, multivariate and spatio-temporal distribution. Thus the implementation of information system possible to data collection, processing, management and service is necessary. In this study, through the implementation of Saemangeum coastal environmental information system using geographic information system, it enables the integral data collection and management and the data querying and analysis of enormous and high-complexity data through the design of intuitive and effective web user interface and scientific data visualization using statistical graphs and thematic cartography. Furthermore, through the quantitative analysis of trend changed over long-term by the geo-spatial analysis with geo- processing, it's being used as a tool for provide a scientific basis for sustainable development and decision support in Saemangeum coast. Moreover, for the effective web-based information service, multi-level map cache, multi-layer architecture and geospatial database were implemented together.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.4
• /
• pp.393-400
• /
• 2015

This study proposes a method to create and combine a superstructure module by parametric modeling, in order to improve the production efficiency of information model for modular steel bridge superstructure that can be used in planning, design and construction phase. Compound classification was performed in order to derive elements to apply the parametric modeling, and according to assembly condition, the classified elements were grouped into 13 types. In addition, three assembly conditions were derived for production of stable superstructure through combination of superstructure module, which is a production unit for modular steel bridge factory. Parameter that reflects assembly condition in compound shape when producing superstructure module through parametric modeling was deducted. Superstructure module compounds were produced according to type and parameter using interface generation based on Building Information Model(BIM) software that was developed in this study. The superstructure module produced reflects information to combine into a superstructure. To verify this, information model based on Industry Foundation Classes(IFC) was built and confirmed the application in production of superstructure by identifying the reflected property information.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.6
• /
• pp.601-608
• /
• 2011

In order to design floating structures, it should be required to evaluate hydrodynamic motions and structural behavior under the wave loadings. Then, structural behavior of floating structures should be evaluated including the effects of wave-induced hydraulic pressure subjected to floating structures. However, there has been a problem to exactly evaluate structural behavior of floating structures since it was difficult to directly connect wave-induced hydraulic pressure resulting from hydrodynamic analysis with structural analysis model. In this study, in order to exactly evaluate structural behavior of floating structures under the wave loading, integrated analysis of hydrodynamic motion and structural behavior was carried out to the large-scaled floating structure. The wave-induced hydraulic pressure resulting from hydrodynamic analysis AQWA were directly mapped to structural analysis model ANSYS bia Workbench interface of ANSYS Inc.. As the results of this study, it was found that the integrated analysis of this study evaluate exactly structural behavior of floating structures under the wave loadings since this method can directly reflect wave-induced hydraulic pressure resulting from hydrodynamic analysis to structural analysis model. Also, as the results of structural behavior evaluation, it was found that the tensile stress on the top slab was maximized at the wave direction of $0^{\circ}$, and tensile stress on the bottom slab was maximized at the wave direction of $45^{\circ}$, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.5 s.335
• /
• pp.31-38
• /
• 2005

The architecture and the implementation details of a UTMI(USB2.0 Transceiver Macrocell Interface) compatible USB2.0 transceiver chip were presented. To confirm the validation of the incoming data in noisy channel environment, a squelch state detector and a current mode Schmitt-trigger circuit were proposed. A current mode output driver to transmit 480Mbps data on the USB cable was designed and an on-die termination(ODT) which is controlled by a replica bias circuit was presented. In the USB system using plesiochronous clocking, to compensate for the frequency difference between a transmitter and a receiver, a synchronizer using clock data recovery circuit and FIFO was designed. The USB cable was modeled as the lossy transmission line model(W model) for circuit simulation by using a network analyzer measurements. The USB2.0 PHY chip was implemented by using 0.25um CMOS process and test results were presented. The core area excluding the IO pads was $0.91{\times}1.82mm^2$. The power consumptions at the supply voltage of 2.5V were 245mW and 150mW for high-speed and full-speed operations, respectively.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.6
• /
• pp.106-117
• /
• 2003

The advanced medical information systems usually consist of loosely-coupled interaction of independent systems, such as HIS/RIS and PACS. To support easier information exchange between these systems and between hospitals, and to support new types of medical service such as teleradiology, it becomes essential to integrate separated medical information and allow them to be exchanged and retrieved through internet. This thesis proposes an integrated medical information system using XML. We analyzed HL7 and DICOM standard formats, and designed an integrated XML DTD. We extracted information from HL7 messages and DICOM files and generated XML document instances and XSL stylesheets based on the proposed XML DTD. We implemented the web interface for the integrated medical information system, which supports data sharing, information exchange and retrieval between two different standard formats. The proposed XML-based integrated medical information system will contribute to solve the problems of current medical information systems, by enabling integration of separated medical informations and by allowing data exchange and sharing through internet. The proposed system with XML is more robust than web-based medical information systems developed by using HTML, because XML itself provides more flexibility and extensibility than HTML.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.128-140
• /
• 2006

In the IEEE 802.16 Wireless MAN standard specifies the air interface of fixed point-to-multipoint broadband wireless access systems providing multiple services. Among the service classes supported between the base station and subscriber stations in the wireless MAN, the best effort service class is ranked on the lowest position in priority and is assisted by a MAC scheme based on reservation ALOHA. The wireless MAN standard, however, does not reveal every detail of the MAC scheme but only describes the skeleton of the MAC scheme. Focusing on the amount of resource that a subscriber demands by a request and the amount of resource that the base grants to a request we thus present a number of resource demand rules and resource grant rules. Also, we construct a candidate MAC scheme by implanting a pair of resource demand and grant rules into the skeleton of the MAC scheme. Meanwhile a difficult situation for the best effort service is expected wherein only scarce resource is available after most of the resource is already preempted by other services. Perceiving such a situation, we evaluate the throughput and delay performance of each candidate MAC scheme. Especially we develop an analytical method to approximately calculate the throughput in the saturated environment. From the numerical results, we observe that the candidate MAC scheme which adopts the non-gated exhaustive demand rule paired with the full grant rule attains superior performance at the expense of the fairness.