• Journal of the Korea Society of Computer and Information
• /
• v.17 no.6
• /
• pp.1-11
• /
• 2012

As the process technology scales down, multi-core processors cause serious problems such as increased interconnection delay, high power consumption and thermal problems. To solve the problems in 2D multi-core processors, researchers have focused on the 3D multi-core processor architecture. Compared to the 2D multi-core processor, the 3D multi-core processor decreases interconnection delay by reducing wire length significantly, since each core on different layers is connected using vertical through-silicon via(TSV). However, the power density in the 3D multi-core processor is increased dramatically compared to that in the 2D multi-core processor, because multiple cores are stacked vertically. Unfortunately, increased power density causes thermal problems, resulting in high cooling cost, negative impact on the reliability. Therefore, temperature should be considered together with performance in designing 3D multi-core processors. In this work, we analyze the temperature of the cache in quad-core processors varying cache organization. Then, we propose the low-temperature cache organization to overcome the thermal problems. Our evaluation shows that peak temperature of the instruction cache is lower than threshold. The peak temperature of the data cache is higher than threshold when the cache is composed of many ways. According to the results, our proposed cache organization not only efficiently reduces the peak temperature but also reduces the performance degradation for 3D quad-core processors.

• Journal of Korean Academy of Nursing
• /
• v.30 no.6
• /
• pp.1455-1466
• /
• 2000

The purpose of this study was to develop the framework of community-based home care nursing delivery system, and to demonstrate and evaluate the efficiency of it. The study was carned out over a period of 3years from September 1996 to August 1999. The researchers developed Standards for operations, this was all aimed toward a home care recording system, and an assessment intervention algorithm for various diseases quality control and standardization. In the center, 185 patients enrolled, and of the enrollments cerebrovascular disorder and cancer were the most prevailment diseases. Also, a home care nursing activity classification was developed in six domains. Those domains were assessment, medication, treatment, education and consultation, emotional care, and referral or follow-up care. Ten sub-domains were divided according to the systematic needs. Among these nursing activities, treatment, assessment, and education and consultation were frequently performed. In sub-domain classification, skin integrity, respiration, circulation, and immobility related care were provided most frequently. The cost of home care nursing per visit was also suggested. The cost include direct and indirect nursing care, management, and transportation cost. Also, the researchers tried to overcome the limitations of hospital-based home care to provide more accessible, efficient, safe, and stable home care nursing. Therefore, clients were referred from other patients, families, public health care centers, industries, and even hospitals. As a result of this study, several limitations of operation were found. First, it was difficult to manage and communicate with doctor in the emergency situations. Second, there was too much time spent for transportation. This was because they are only five nurses, who cover all of the areas of Seoul and nearby cities. Third, preparation for special care of home care nurses was lacking. Fourth, criteria for the termination of care and the frequency of home visits were ambiguous. Finally, interconnection with home care machinery company was so yely needed. New paragraphs' strategies for solving these problems were suggested. This study will be the basis of community-based home care nursing, and the computerized information delivery system for home care nursing in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.601-610
• /
• 2020

Recently, damage caused by drought is becoming worse and worse due to the global climate change. To overcome these problems, movable-weir to control the water level has been installed instead of a fixed-weir made from concrete. On the other hand, it is difficult to operate an existing moveable-weir because of the high cost of facility management and manpower consumption. In addition, because most moveable-weirs are installed in power systems, the operating cost and the cost of connection for power systems increase when they are located in remote areas. Therefore, this paper proposes an optimal design algorithm and the evaluation algorithm of the SOC (state of charge) of a lithium-ion battery to replace an existing power supply with eco-friendly movable-power with a power supply system using PV modules and lithium-ion batteries. In addition, this study modeled a 50kW power supply system of a movable-weir using PSCAD/EMTDC S/W. The simulation results confirmed that the proposed algorithm has stable operation characteristics in an independent operation mode and interconnection operation mode and that there is the possibility of commercialization with a benefits evaluation of the eco-friendly power supply system of a movable-weir.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.4
• /
• pp.37-46
• /
• 2015

In this paper, the heat transfer characteristics of PCB (Printed Circuit Board) with cabon CCL (Copper Claded Layer) were studied through experiments and numerical analysis to compare of PCBs with conventional the FR-4 core and heavy copper cores. For study, samples are producted with HDI (High Density Interconnection) PCB of mobile phone with variations of thickness of core materials and grades of carbon material to evaluate heat transfer characteristics respectively. From this research results, heat transfer characteristics of the carbon core was rather low than heavy copper, but better than FR-4 core. In addition, even though the carbon and heavy copper core contributed on the heat transfer characteristics as their thickness increases, FR-4 cores disturbed heat transfer characteristics as it's thickness increases. Therefore, carbon core is recommendable to improve the heat transfer characteristics of the PCB because heavy copper core has much disadvantages such as increasing of wear of drill, the weight of PCB, and manufacturing cost by additional insulation materials for electrical insulation.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.4
• /
• pp.25-29
• /
• 2015

Demand for a low-cost, high-throughput, and high-resolution patterning method for fabricating devices continues to increase. The roll-to-roll (R2R) imprint lithography technique has received a great deal of attention as a means of fabricating next-generation devices. In this paper, we propose a fabrication method for polymeric planar lightwave circuit (PLC) devices that uses R2R imprint lithography. The proposed technique uses an elastomeric polydimethylsiloxane (PDMS) mold. A Si wafer with micro patterns is used as the Si master. The PDMS mold is then replicated from the Si master. By applying a precise web tension and at a given web speed, we fabricated a micro-patterned PLC device. The insertion losses were 4.0 dB for a $1{\times}2$ optical splitter. As such, the proposed method of fabricating a PLC device by the R2R process was shown to be an effective solution.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.7
• /
• pp.7-13
• /
• 2001

The wirebonding is a common interconnection technique for modern microwave devices because of rather simple and reliable processes involved. At millimeter-wave frequencies, however, the bondwire parasitics are significant and consequently limit the external performance of packaged devices. In this paper, we represent wideband characterization of multiple bondwires and ribbon in a frequency range from 20 to 35 GHz. From these results, the double bondwire shows very small insertion loss less than 0.55 dB up to 35 GHz and its performance is comparable to that of the ribbon in the millimeter-wave frequencies. Therefore, the wirebonding is very suitable for millimeter wave packaging in terms of performance and manufacturing cost.

• Journal of Internet Computing and Services
• /
• v.8 no.5
• /
• pp.133-140
• /
• 2007

Currently, as the requirement for high quality Internet access from anywhere at anytime is consistently increasing, the interconnection of pure ad hoc networks to fixed IP networks becomes increasingly important. Such integrated network, referred to as hybrid ad hoc networks, can be extended to many applications, including Sensor Networks, Home Networks, Telematics, and so on. We focus on some data communication problems of hybrid ad hoc networks, such as broadcasting and routing. In particular. power failure of mobile terminals is the most important factor since it affects the overall network lifetime. We propose an energy-efficient routing protocol based on clustering for hybrid ad hoc networks. By applying the index-based data broadcasting and selective tuning methods, the infra system performs the major operations related to clustering and routing on behalf of ad hoc nodes. The proposed scheme reduces power consumption as well as the cost of path discovery and maintenance, and the delay required to configure the route.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.5
• /
• pp.288-293
• /
• 2017

$Fe_2O_3$ is one of the most important metal oxides for gas sensing applications because of its low cost and high stability. It is well-known that the shape, size, and phase of $Fe_2O_3$ have a significant influence on its sensing properties. Many reports are available in the literature on the use of $Fe_2O_3$-based sensors for detecting gases, such as $NO_2$, $NH_3$, $H_2S$, $H_2$, and CO. In this paper, we investigated the gas-sensing performance of a Pt-doped ${\varepsilon}$-phase $Fe_2O_3$ gas sensor. Pt-doped $Fe_2O_3$ nanoparticles were synthesized by a Sol-Gel method. Platinum, known as a catalytic material, was used for improving gas-sensing performance in this research. The gas-response measurement at $300^{\circ}C$ showed that $Fe_2O_3$ gas sensors doped with 3%Pt are selective for $NO_2$ gas and exhibita maximum response of 21.23%. The gas-sensing properties proved that $Fe_2O_3$ could be used as a gas sensor for nitrogen dioxide.

• Structural Engineering and Mechanics
• /
• v.67 no.6
• /
• pp.643-658
• /
• 2018

In this paper, we introduce a new framework for running the finite element (FE) packages inside an online Loop together with MATLAB. Contrary to the Hardware-in-the-Loop techniques (HiL), in the proposed Software-in-the-Loop framework (SiL), the FE package represents a simulation platform replicating the real system which can be out of access due to several strategic reasons, e.g., costs and accessibility. Practically, SiL for sophisticated structural design and multi-physical simulations provides a platform for preliminary tests before prototyping and mass production. This feature may reduce the new product's costs significantly and may add several flexibilities in implementing different instruments with the goal of shortlisting the most cost-effective ones before moving to real-time experiments for the civil and mechanical systems. The proposed SiL interconnection is not limited to ABAQUS as long as the host FE package is capable of executing user-defined commands in FORTRAN language. The focal point of this research is on using the compiled FORTRAN subroutine as a messenger between ABAQUS/CAE kernel and MATLAB Engine. In order to show the generality of the proposed scheme, the limitations of the available SiL schemes in the literature are addressed in this paper. Additionally, all technical details for establishing the connection between FEM and MATLAB are provided for the interested reader. Finally, two numerical sub-problems are defined for offline and online post-processing, i.e., offline optimization and closed-loop system performance analysis in control theory.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.1
• /
• pp.35-44
• /
• 2005

This paper proposes an efficient heuristic load balancing algorithm for multiprocessor systems. The algorithm minimizes the number of idle links to distribute load traffic and reduces its communication cost. Each processor iteratively tries to transfer unit load to/from all neighbor processors. However, real load transfer is collectively done after all load traffic is calculated. This prevents useless traffic and thus reduces the overall load traffic. The proposed algorithm can be employed in various interconnection topologies with slight modifications. In this paper, it is applied to hypercube, mesh, k-ary n-cube and general graph environments. For performance evaluation, simulation studies are performed. The proposed algorithm and the well-known existing algorithms are implemented and compared. The results show that the proposed algorithm always balances the loads perfectly. furthermore, in comparison with the existing algorithms, it reduces the communication costs by 77%, 74% and 73% in the hypercube, the mesh, and k-ary n-cube, respectively.