• Journal of the Korean Institute of Telematics and Electronics
• /
• 제24권4호
• /
• pp.618-624
• /
• 1987

This paper describes the design and fabrication of a signal processing integrated circuit required for the recording and playback of VTR audio signal. The integrated circuit was designed using 8\ulcorner design rule and its chip size is 2.5x2.5mm\ulcorner It was fabricated using SST bipolar standard process technology. The measurement analysis of the fabricated circuit proves the satisfactory DC characteristics and its proper audio signal processing funcstion.

• Journal of information and communication convergence engineering
• /
• 제6권3호
• /
• pp.270-274
• /
• 2008

This paper proposes an advanced signal processing circuit for a fingerprint sensor based on ridge resistivity. A novel fingerprint integrated sensor using ridge resistivity variation resulting from ridges and valleys on the fingertip is presented. The pixel level simple detection circuit converts from a small and variable sensing current to binary voltage out effectively. The sensor circuit blocks were designed and simulated in a standard CMOS 0.35 ${\mu}m$ process.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.970-973
• /
• 2003

Abstract An idea to redce the direct-path short circuit current of the CMOS digital integrated circuit is present. The sample circuit model of the CMOS digital circuit is the CMOS current-control digital output driver circuit, which are also suitable for the low voltage supply integrated circuits as the simple digital inverter, are present in this title. The circuit consists of active MOS load as the current control source, which construct from the saturated n-channel and p-channel MOSFET and the general CMOS inverter circuits. The saturated MOSFET bias can control the output current and the frequency response of the circuit. The experimental results show that lower short circuit current control can make the lower frequency response of the circuit.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.419-421
• /
• 1996

We propose the digitized pressure sensor and the interface circuit to read directly the pressure signal in the digital form. The interface circuit has the control clock, comparator, and bit value decision circuit. The digitized sensor and interface circuit are integrated on the one chip using the post processing after IC fabrication. The dimension of the fabricated digitized pressure sensor is $3{\times}6{\times}1mm^3$.

• Journal of Sensor Science and Technology
• /
• 제14권1호
• /
• pp.28-32
• /
• 2005

In this paper, a CMOS integrated detection circuit for capacitive type fingerprint sensor signal processing is described. We designed a detection circuit of charge-sharing sensing scheme. The proposed detection circuit increases the voltage difference between a ridge and valley. The test chip is composed of $160{\times}192$ array sensing cells (12 by $12.7{\;}mm^{2}$). The chip was fabricated on a 0.35 m standard CMOS process. Measured difference voltage between a ridge and valley was 0.95 V.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• 제29A권1호
• /
• pp.48-59
• /
• 1992

This paper presents the design of a layout processing system that performs circuit and symbolic extraction from hierarchical designs containing arbitrarily shaped layout. The system is flexible enough to deal with various technologies, MOS or bipolar, by providing extraction rules in the form of technology files. In this paper, new efficient algorithms for trapezoidal decomposition of polygon and symbolic path extraction using trapezoidal template are proposed for symbolic extraction. Circuit and symbolic extractor is developed as an integrated design environment of SOLID system.

• Journal of Semiconductor Engineering
• /
• 제1권2호
• /
• pp.64-73
• /
• 2020

As CMOS technology scales down, the design of analog signal processing circuit becomes far more difficult because of steadily decreasing supply voltage and smaller intrinsic gain of transistors. With sub-1V supply voltage, the conventional analog signal processing relying on high-gain amplifiers is not an effective solution and different approach has to be sought. One of the promising approaches is "time-domain analog signal processing" which exploits the improving switching speed of transistors in a scaled CMOS technology. In this paper, various time-domain analog signal processing techniques are explained with some experimental results.

• The Journal of the Acoustical Society of Korea
• /
• 제36권2호
• /
• pp.123-129
• /
• 2017

In this paper, the realization of a directional digital hearing aid was considered. Conventional time domain time delay method was replaced with digital filters in order to make any general-purposed DSP (Digital Signal Processing) chip to produce the similar directivity pattern. Both the time delay algorithm and the digital filter algorithm were initially evaluated by Matlab (Matrix laboratory) for comparison, and it was confirmed by CSR 8675 Bluetooth DSP IC (Digital Signal Processing Integrated Circuit) chip firmware realization. Some remote control features by a smart phone was added to the smart hearing aid for user interface easiness.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.960-964
• /
• 2003

In this paper, the CMOS integrated circuit technique for implementing current-mode maximum and minimum operations scheme is described. The maximum and minimum operations are incorporated into the same scheme with parallel processing. Using this scheme as the basic unit, an analog three-input maximum, median, and minimum circuit is designed. The performance of the proposed circuit shows a very sharp transfer characteristic and high accuracy. The proposed circuit achieves a high-speed operation, which is suitable for real-time systems. The PSPICE simulation results demonstrating the characteristic of the proposed circuit are included.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• 제37권6호
• /
• pp.42-49
• /
• 2000

In this paper, we propose the parallel ternary logic circuit design algorithm to DCG Property with 2$^n$ nodes. To increase circuit integration, one of the promising approaches is the use of multiple-valued logic(MVL). It can be useful methods for the realization of compact integrated circuit, the improvement of high velocity signal processing using parallel signal transmission and the circuit design algorithm to optimize and satisfy the circuit property. It is all useful method to implement high density integrated circuit. In this paper, we introduce matrix equation to satisfy given DCG with 2$^n$ nodes, and propose the parallel ternary logic circuit design process to circuit design algorithm. Also, we propose code assignment algorithm to satisfy for the given DCG property. According to the simulation result of proposed circuit design algorithm, it have the following advantage ； reduction of the circuit signal lines, computation time and costs.