• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.4
• /
• pp.232-243
• /
• 2002

There are many methods for improving TLB (translation lookaside buffer) performance, such as increasing the number of entry in TLB, supporting large page or multiple page sizes. The best way is to support multiple page sizes, but any operating system doesn't support multiple page sizes in user mode. So, we propose the new structure of TLB supporting two pages to obtain the effect of multiple page sizes with high performance and at low cost without operating system support. we propose a new TLB structure supporting two page sizes dynamically and selectively for high performance and low cost design without any operating system support. For high performance, a promotion-TLB is designed by supporting two page sizes. Also in order to attain low power consumption, a banked-TLB is constructed by dividing one fully associative TLB space into two sub-fully associative TLBs. These two banked-TLB structures are integrated into a banked-promotion TLB as a low power and high performance TLB structure for embedded processors. According to the results of comparison and analysis, a similar performance can be achieved by using fewer TLB entries and also power consumption can be reduced by around 50% comparing with the fully associative TLB.

• Journal of Science and Technology Studies
• /
• v.3 no.2 s.6
• /
• pp.29-60
• /
• 2003

Inter-Korean Cooperation in Science and Technology will contribute to building the trust between S.K and N.K as a leading factor and cut down the cost of unification by diminishing the technology lag and the gap of economic level. This study has shown that we can increase the productivity of unified Korea Innovation system if we systematically analyse the present condition of the Inter-Korean Cooperation and promote Inter-Korean Cooperation. In this study, the author analyses the present condition of the Inter-Korean Cooperation with integrated framework of three aspects to clear up the policy of Inter-Korean Cooperation. First, in the national aspect, we make use of the notion of international cooperation and multilateral mechanism of an international organization. Thereafter, we make out the alternatives in the aspects of international relationship and legal and institutional view Second, in the unification aspect, we consider the Inter-Korean Cooperation by the notion of national innovation system. Thereafter, we make out the alternative in the aspect of a phase-dependent approach. Finally, in technology aspect, we consider the Inter-Korean Cooperation by the notion of technology gap, the framework of technology transfer, and technology dependency theory. As a conclusion, through this study, the author have tried to integrate the various theoretical backgrounds. As a result, the author could analyse the present condition of ter-Korean Cooperation in Science and Technology and team a good lesson from it; Therefore, we can use it as a means of evaluation on a cooperation program and prediction for the future status of cooperation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.4
• /
• pp.19-33
• /
• 2012

Ministry of Land, Transport and Maritime Affairs prepared the method to update traffic connection system by amending "National Transport System Efficiency Act(hereinafter Act)". The key is a development of Intermodal Transfer Center. The law and guideline related with Intermodal Transfer Center requires the installation and operation of transfer information guide facility to improve user's convenience. However, there are no sufficient studies that can be used as references for the method to construct transfer support information system related with user's preference. The study performed the research about user's service satisfaction in relation with transfer support information service, which was embodied in model operation process, on the basis of transfer support information system of Intermodal Transfer Center applied to Gimpo Airport. The analysis result about service preference, importance of each supplied information, service satisfaction and consideration for service embodiment can be used as a guideline to embody the user information service of Intermodal Transfer Center. In addition, through CVM, the study estimated and proposed the service valuation of smart intermodal transfer service that provides customized information to cope with user's situation and traffic means operation status among transfer support information service. It is determined that the study will measure the benefit of Intermodal Transfer Center user by using monetary value when smart intermodal transfer service is supplied and provide the ground to expand high-tech transfer information service with high usefulness and convenience.

• Journal of Korea Water Resources Association
• /
• v.44 no.12
• /
• pp.1015-1029
• /
• 2011

Conventional MCDA techniques have been used in the field of water resources in the past. A GIS can offer an effective spatial data-handling tool that can enhance water resources modeling through interfaces with sophisticated models. However, GIS systems have a limited capability as far as the analysis of the value structure is concerned. The MCDA techniques provide the tools for aggregating the geographical data and the decision maker's preferences into a one-dimensional value for analyzing alternative decisions. In other words, the MCDA allows multiple criteria to be used in deciding upon the best alternatives. The combination of GIS and MCDA capabilities is of critical importance in spatial multi-criteria analysis. The advantage of having spatial data is that it allows the consideration of the unique characteristics at every point. The purpose of this study is to identify, review, and evaluate the performance of a number of conventional MCDA techniques for integration with GIS. Even though there are a number of techniques which have been applied in many fields, this study will only consider the techniques that have been applied in floodplain decision-making problems. Two different methods for multi-criteria evaluation were selected to be integrated with GIS. These two algorithms are Compromise Programming (CP), Spatial Compromise Programming (SCP). The target region for a demonstration application of the methodology was the Suyoung River Basin in Korea.

• Korean Journal of Comparative Education
• /
• v.18 no.4
• /
• pp.57-81
• /
• 2008

Comparing to those of the US and European countries, the education for international understanding(EIU) in Korea has a relatively short history. It has been accelerated since Korean government put an emphasis on globalization of the country in 1990s. However, it was not until the beginning of 2000s that academic discussion on EIU has really begun. This study evaluated the development of EIU in Korea and proposed future directions based on its assessment. First of all, EIU in Korea needs to invite more diverse actors beyond UNESCO. Being an interdisciplinary subject, EIU requires more supports from and cooperations among professionals in diverse fields. The main themes in EIU, such as global interdependence, global perspectives, cross-cultural understanding need to be more emphasized, and the global issues such as peace and human rights need to be integrated into the framework of EIU. Based on the analyses of current EIU practices and the forgoing discussions, some recommendations were proposed for the improvement of EIU in Korean schools. In addition, the relationship between EIU and multicultural education was discussed and some suggestions were focused on the ways to improve their cooperation as the world becomes more closer and the Korean society moves into a multicultural society.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.194-201
• /
• 2019

This study analyzed the properties of concrete depending on the coal gasification slag(CGS) contents in order to examine the applicability of CGS as the fine aggregate for concrete. Experimental results, trended that the slump and slump flow increased with increasing CGS contents, and air contents has decreased. Evaluation index for segregation of normal strength concrete(EISN) is showed was good from CGS 25% when using crushed sand A(CSa) and CGS 50% when using mixed sand(MS). The compressive strength decreased with increasing CGS contents when CSa was used. However, when MS was used, the maximum value was CGS 50% due to parabolic tendency. Depending on fine aggregates type, compared with compressive strength of CSa was about 8% higher than that of MS, and depending on the use or unuse of CGS, more advantageous at higher strength than low strength. As a result of relative performance study on the quality of concrete according to the CGS contents, it is considered that CGS can be positively contributed to enhancement of workability and strength development when mixed with fine aggregate around 25~50%.

• Journal of Biomedical Engineering Research
• /
• v.40 no.5
• /
• pp.197-205
• /
• 2019

The existing Extracorporeal membrane oxygenation(ECMO) and Cardiopulmonary bypass system(CPB) have been developed and applied to various devices according to their respective indications. However, due to the complicated configuration and difficult usage method, it causes inconvenience to users and there is a risk of an accident. Therefore, smart all-in-one cardiopulmonary circulation device is being developed recently. The smart all-in-one cardiopulmonary assist device consists of a blood pump for cardiopulmonary bypass, a blood oxidizer for cardiopulmonary bypass, a blood circuit for cardiopulmonary bypass, and an artificial cardiopulmonary device. It is an integrated cardiopulmonary bypass device that can be used for a variety of purposes such as emergency, intraoperative, post-operative intensive care, and long-term cardiopulmonary assist, combined with CPB used in open heart surgery and ECMO used when patient's cardiopulmonary function does not work normally. The smart all-in-one cardiopulmonary assist device does not exist as a standard and international standard applicable to advanced medical devices. Therefore, in this study, we will refer to the International Standard for Blood Components, the International Standard for Blood, the Guideline for Blood Products, and prepare applicable performance and safety guidelines to help quality control of medical devices, and contribute to the improvement of the health of people. The guideline, which is the result of conducted a survey of the method of safety and performance test, is based on the principle of all-in-one cardiopulmonary aiding device, related domestic foreign standards, the status of domestic and foreign patents, related literature, blood pump(ISO 18242), blood oxygenator (ISO 7199), and blood circuit (ISO 15676) for cardiopulmonary bypass.The items on blood safety are as follows: American Society for Testing and Materials ASTM F1841-97R17), and in the 2010 Food and Drug Administration's Safety Assessment Guidelines for Medical Assisted Circulatory Devices. In addition, after reviewing the guidelines drawn up through expert consultation bodies including manufacturers / importers, testing inspectors, academia, etc. the final guideline was established through revision and supplementation process. Therefore, we propose guidelines for evaluating the safety and performance of smart all-in-one cardiopulmonary assist devices in line with growing technology.

• Journal of Environmental Impact Assessment
• /
• v.30 no.6
• /
• pp.413-424
• /
• 2021

Health impact assessment in the environmental impact assessment is conducted to determine whether to exceed the standard of each single substance and to establish appropriate reduction measures. In some development projects, although all substances in risk assessment meet the standard, exposure concentration is very close to it. However, considering the cumulative exposure of all substances, health effects are likely to occur considerably severer than those of individual substances, so it is necessary to prepare a concrete and improved methodology for integrating evaluation of emissions to identify the health effects actually exposed to receptors of living things. This study established the definition of cumulative risk assessment through overseas advanced cases and domestic and foreign literature reviews, and proposed a methodology for utilizing cumulative risk assessment considering health effects on multiple substances when developing industrial complexes. Applied by the proposed methodology, integrated indicators forfourtypes of hazardous heavy metals (Ni, Cr⁶⁺, Cd, As) emitted from industrial complexes were calculated, and applicability was tested with case of the industrial complex development projects conducted over the last decade (2011-2020).

• The Korean Journal of Food And Nutrition
• /
• v.34 no.5
• /
• pp.477-486
• /
• 2021

To utilize Malus pruniforia Borkh. as a functional material, cold-water (CW), hot-water (HW), and 70% ethanol (EtOH) extracts were prepared, and their antioxidant and anti-inflammatory activities were compared. The antioxidant activity of the HW extract evaluated by ABTS and DPPH radical scavenging and FRAP activity was significantly effective. The total polyphenol content of the HW extract was also higher by 15.5±0.7 mg GAE/g extract compared to other extracts. The EtOH extract showed significantly decreased TNF-α (39.8%), IL-6 (65.5%), and NO (34.9%) levels in RAW 264.7 cells compared to the LPS-induced control group. The levels of IL-6 (21.1%) and IL-8 (19.3%) were significantly decreased by treatment of EtOH extract in HaCaT keratinocytes induced with TNF-α and IFN-γ. The UHPLC-MS results indicated that the EtOH extract might have chlorogenic acid and phlorizin as the major compounds. This was validated using HPLC-DAD, which showed that the EtOH extract had higher levels of chlorogenic acid and phlorizin (1,185±58 and 470±10 ㎍/g extract, respectively). In conclusion, the present study suggested that the anti-inflammatory activity of the EtOH extract was more effective than the CW and HW extracts, and chlorogenic acid and phlorizin could be used as indicator compounds and functional substances.

• Ocean and Polar Research
• /
• v.43 no.4
• /
• pp.229-243
• /
• 2021

Quality control (QC) to process observed time series has become more critical as the types and amount of observed data have increased along with the development of ocean observing sensors and communication technology. International ocean observing institutions have developed and operated automatic QC procedures for these observed time series. In this study, the performance of automated QC procedures proposed by U.S. IOOS (Integrated Ocean Observing System), NDBC (National Data Buy Center), and OOI (Ocean Observatory Initiative) were evaluated for observed time-series particularly from the Yellow and East China Seas by taking advantage of a confusion matrix. We focused on detecting additive outliers (AO) and temporary change outliers (TCO) based on ocean temperature observation from the Ieodo Ocean Research Station (I-ORS) in 2013. Our results present that the IOOS variability check procedure tends to classify normal data as AO or TCO. The NDBC variability check tracks outliers well but also tends to classify a lot of normal data as abnormal, particularly in the case of rapidly fluctuating time-series. The OOI procedure seems to detect the AO and TCO most effectively and the rate of classifying normal data as abnormal is also the lowest among the international checks. However, all three checks need additional scrutiny because they often fail to classify outliers when intermittent observations are performed or as a result of systematic errors, as well as tending to classify normal data as outliers in the case where there is abrupt change in the observed data due to a sensor being located within a sharp boundary between two water masses, which is a common feature in shallow water observations. Therefore, this study underlines the necessity of developing a new QC algorithm for time-series occurring in a shallow sea.