• Industry Promotion Research
• /
• v.2 no.1
• /
• pp.45-50
• /
• 2017

This study analyzed the effect of on - the - job training of workers in Chungnam western area on productivity improvement. A total of 76 questionnaires were analyzed for workers in the western part of Chungcheongnam-do that completed the training course of the Korea Polytechnic University Education and Labor Ministry. The results of this study are as follows: First, the higher the motivation to receive the on - the - job training for the improvement of the productivity, the higher the satisfaction of the training of the worker, but the effect on the job productivity was not significant. Second, the correlation between training experience and job productivity was not statistically significant. Third, as for the effect on the productivity improvement according to the rank, the temporary workers showed higher education satisfaction than the regular workers (agency), and the job productivity was higher than the manager (manager level). Results of ANOVA analysis showed that there was a significant effect on educational satisfaction and job satisfaction according to years of work, career, and rank. The purpose of this study is to analyze the effects of on - the - job training of workers in the western part of Chungnam, on the productivity improvement, The validity of the study is significant.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.4
• /
• pp.45-54
• /
• 2020

This study investigated basic data on walking characteristics, including walking speed and cognitive-response for the elderly, and based on these, the time of walking signal was calculated. The on-site survey examined the actual pedestrian crossing speed using a stopwatch, and the age was divided into groups of ordinary people and the elderly. Analysis of the data showed that the average walking speed for the general public was 1.29 m/s, while the average walking speed for the elderly was 1.13 m/s, higher than that of the general public. In addition, the lower speed of the 15th percentile was analyzed to 1.01 m/s for the general population and 0.85 m/s for the elderly, showing a lower walking speed than the standard for the general area and 0.8 m/s for the protected area. However, for senior citizens who use walking sticks or wheelchairs, the speed of the lower 15th-percentile is 0.73 m/s, which is lower than the current standard of protected areas, according to the analysis.

• Journal of Korea Port Economic Association
• /
• v.28 no.2
• /
• pp.1-27
• /
• 2012

As more manufacturing and global businesses are being pulled into the port area, the idea of a Port Business Valley (PBV) is being pondered as it would create jobs and added value. The PBV would be centered around the harbor and be connected to the port, a logistics district, an industrial district, and the city. The resulting domestic and foreign investment in logistics, industry, business, tourism, living, etc. would vitalize the geographical characteristics of Incheon Port. It would also generate the largest amount of ripple effects between industries in the PBV. However, up until recently, the most frequently offered examples of planning that have helped logistics of a port to grow that have used a PBV have been those of Busan New Port and Gwangyang Port. However, this study is the result of the recent inception of the idea of creating a PBV centered around Incheon Port and the need for experts to develop a plan for such a PBV in Incheon by conducting a site specific study. The aim of this study is to set up the concept of PBV and establish PBV model of Incheon Port. In addition, this study identifies construct factors and their strategies for establish PBV of Incheon Port and then, shows the key factors and related-strategies on Fuzzy-AHP analysis from a survey of logistics experts with Incheon Port.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.1 no.2
• /
• pp.181-191
• /
• 1991

The present study determined the overall noise level and the distribution of sound pressure level over audible frequency range of noise produced at various work sites. Work-related noise greater than 80dBA produced from 98 separate work sites at 37 manufacturing companies and machine shops were analysed for the overall sound level (dBA) and frequency distribution. In addition, to determine the possible hearing loss related to work site noise, a hearing test was also conducted on 1,374 workers in these work sites. The results of the study were as follows ; 1. Of the total 98 work sites, 57 work sites(58.2%) produced noise exceeding threshold limit value (${\geq}90dBA$) set by the Ministry 01 Labor. In terms of different manufacturing industries the proportion of work sites which exceeded 90dBA was the highest for the cut-stone products industry with 6/6 work sites and lowest for the commercial printing industry with 1/13 work sites. 2. The percentage of workers who were exposed to noise greater than 90dBA was 19.8% (1,040 workers) 01 the total 5,261 workers. In terms of different industries, cut-stone products industry had the most workers exposed to noise exceeding 90dBA with 82.8%, textile bleaching and dyeing industry was next at 30.6% followed by fabricated metal products industry with 27.9%, plastic products manufacturing industry had the lowest percentage of workers exposed to 90dBA exceeding noise with 4.5%. 3. There was a statistically significant correlation between the frequency of noise-induced hearing loss and the percentage of workers exposed to noise exceeding 90dBA (P<0.05). 4. The frequency analysis of noise produced at the 98 work sites revealed that 44 work sites (44.9%) had the maximum sound pressure level at high-frequencies greater than 2KHz. In addition, significantly higher sound pressure level was detected at the high-frequencies at 90dBA exceeding work sites as compared to below 90dBA work sites (P<0.01). 5. The differences in sound level meter's A-and C-weighted sound pressure levels were analysed by frequencies. Of the 28 work sites which showed 0-1 dB difference in the two weighted sound levels, 20 work sites (71.4%) had significantly higher sound pressure levels at high-frequencies greater than 2KHz (P<0.01). Furthermore, there was a tendency for higher sound pressure levels to occur in the high-frequency range as the differences in the two weighted sound levels decreased.

• 전자공학회논문지 IE
• /
• v.49 no.1
• /
• pp.12-17
• /
• 2012

Fast development of ubiquitous technology prompted the broadening of the related application area. Application of ubiquitous techniques and system into the construction sites may give us many benefits. There are always a lot of hazard situations in construction sites, and the falling is known to have the high accident rate. To prevent the falling, there has been a lot of efforts including safety education and use of safety gears. In this study, we designed, fabricated and tested a system that can monitor the worker's safety and location informations in real time by using the wireless technology of TOA and RSSI. We used ATmegal28 that is popular in the industrial equipments as MCU and NanoPan 5357 module from Nanotron and CC2500 chipset from TI for radio circuits. We also used 3-axis accelerometer and pressure MEMS sensors to obtain the environmental information, and therefore to aquire the informations of the worker's movement and altitude. We used Labview software from National Instrument to monitor and control the system. We developed the system to send the warning alarms to the server operator and the workers when the workers in the danger zone did not wear the safety hook.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.4
• /
• pp.275-288
• /
• 2009

The Korean government strengthened the environmental polices to manage and enhance Metropolitan Area air quality, and also has enforced "Special Act on Seoul Metropolitan Air Quality Improvement (SASMAQI)" issued in Dec. 2004. Recently government expanded the Seoul Metropolitan Air Quality Management District (SMAQMD) to the outskirts satellite cities of Seoul area through the "Revised Law Draft of SASMAQI". The SMAQMD has been alloted the allowable emission loads to the local governments on the basis of the carrying $PM_{10}$ capacity. However, in order to establish the effective air quality control strategy for $PM_{10}$, it is necessary to understand the corresponding sources which have a potential to directly impact ambient $PM_{10}$ concentration. To deal with the situations, many receptor methodologies have been developed to identify the origins of pollutants and to determine the contributions of sources of interests. The objective of this study was to extensively identify $PM_{10}$ sources and to estimate their contributions at the metropolitan area. $PM_{10}$ samples were simultaneously collected at the 3 semi-industrialized local cities in the Seoul metropolitan area such as Hwasung-si, Paju-si, and Icheon-si sites from April 15 to May 31, 2007. The samples collected on the teflon membrane filter by one $PM_{10}$ cyclone sampler were analyzed for trace metals and soluble ions and samples on the quartz fiber filter by another sampler were analyzed for OC and EC. Source apportionment study was then performed by using a positive matrix factorization (PMF) receptor model. A total of 6 sources were identified and their contributions were estimated in each monitoring site. Contribution results on Hwasung, Paju, and Icheon sites were as follows: 33%, 27%, and 27% from soil source, 26%, 26%, and 21% from secondary aerosol source, 11%, 11%, and 12% from biomass burning, 12%, 6%, and 5% from sea salt, 7%, 15%, and 19% from industrial related source, and finally 11%, 15%, and 16% from mobile and oil complex source, respectively. This study provides information on the major sources affecting air quality in the receptor sites and thus it will help to manage the ambient air quality in the metropolitan area by establishing reasonable control strategies, especially for the anthropogenic emission sources.

• Journal of Korea Water Resources Association
• /
• v.37 no.11
• /
• pp.897-913
• /
• 2004

There has been continuous efforts to manage the water resources for the required water quality criterion at river channel in Korea. However, we could not obtain the partial improvement only for the point source pollutant such as, wastewater from urban and industrial site through the water quality management. Therefore, it is strongly needed that the Best Management Practice(BMP) throughout the river basin for water quality management including non-point source pollutant loads. This problem should be resolved by recognizing the non-point source pollutant loads from upstream river basin to the outlet depends on the land use and soil type characteristic of the river basin using the computer simulation by distributed parameter model based on the detailed investigation and the application of Geographic Information System(GIS). Used in this study, Annualized Agricultural Non-Point Source Pollution (AnnAGNPS) model is a tool suitable for long term evaluation of the effects of BMPs and can be used for un gauged watershed simulation of runoff and sediment yield. Now applications of model are in progress. So we just describe the limited result. However If well have done modeling and have investigated of propriety of model, well achieve our final goal of this study.

• Korean Journal of Microbiology
• /
• v.46 no.4
• /
• pp.383-388
• /
• 2010

Alkaline protease-overproducing strains of Vibrio metschnikovii were developed by using the molecular evolution from the classical mutants V. metschnikovii L12-23, N4-8, and KS1. Each vapK (Vibrio alkaline protease K) was obtained from the genomic DNAs of mutants by PCR to carry out the DNA shuffling. The modified vapK-1 obtained by DNA shuffling was used again as a template for the error-prone PCR to make the vapK-2. Both genes were cloned in the plasmid pKF3 to construct the recombinant plasmids which have one or two copies of the modified genes. The recombinant plasmids were back-transformed to V. metschnikovii KS1 to construct recombinant V. metschnikovii that expresses the alkaline protease. About 3.9-fold more protease activity was measured in the strain which has the plasmid containing two copies of vapK-2 when compared to strain KS1. When compared to wild type V. metschnikovii RH530, 43-fold more activity was achieved. Comparison of amino acids among vapK, vapK-1, and vapK-2 revealed that the active sites was highly conserved and not changed. However, many amino acids except the active sites were changed. These results suggested that the changes in amino acids might play an important role in the increase of protease activity by allowing the easy access of substrate to active sites of the protease. The fermentation of alkaline protease from the V. metschnikovii KS1 harboring the plasmid that contains two copies of vapK-1 showed the possibility of this strain to be used as industrial producer.

• Journal of Practical Engineering Education
• /
• v.12 no.1
• /
• pp.31-39
• /
• 2020

Big data analysis is analyzed and used in a variety of management and industrial sites, and plays an important role in management decision making. The job competency of big data analysis personnel engaged in management analysis work does not necessarily require the acquisition of microscopic IT skills, but requires a variety of experiences and humanities knowledge and analytical skills as a Data Scientist. However, big data education by state-run and state-run educational institutions and job education institutions based on the National Competency Standards (NCS) is proceeding in terms of software engineering, and this teaching methodology can have difficult and inefficient consequences for non-technical majors. Therefore, we analyzed the current Big Data platform and its related technologies and defined which of them are the requisite job competency requirements for field personnel. Based on this, the education courses for big data analysis and visualization techniques were organized for non-technical-based majors. This specialized curriculum was conducted by working-level officials of financial institutions engaged in management analysis at the management site and was able to achieve better educational effects The education methods presented in this study will effectively carry out big data tasks across industries and encourage visualization of big data analysis for non-technical professionals.

• Journal of Digital Convergence
• /
• v.15 no.5
• /
• pp.37-48
• /
• 2017

Recently, the importance of software education is growing because computational thinking of software education is recognized as a key means of future economic development. Also human resources who will lead the 4th industrial revolution need convergence and creativity, computational thinking based on critical thinking, communication, and collaborative learning is known to be effective in creativity education. Software education is also a time needed to reflect social issues such as collaboration with developers sharing interests and open source development methods. Github is a leading social coding site that facilitates collaborative work among developers and supports community activities in open software development. In this study, we apply operational cases of basic learning of social coding sites, learning for storage server with sources and outputs of lectures, and open collaborative learning by using Github. And we propose educational model consisted of four stages: Introduction to Github, Using Repository, Applying Social Coding, Making personal portfolio and Assessment. The proposal of this paper is very effective for software education by attracting interest and leading to pride in the student.