• Journal of Life Science
• /
• v.26 no.10
• /
• pp.1196-1201
• /
• 2016

The ovary parts of Nelumbo nucifera were extracted in 80% methanol (MeOH), and the concentrated extract was then partitioned using n-hexane, ethyl acetate (EtOAc), n-butanol (n-BuOH), and H₂O, successively. Using an octadecyl silica gel (ODS) column, silica gel (SiO₂) column chromatography, and a HPLC purification system, five compounds were isolated from the n-hexane fraction obtained from the extract of N. nucifera ovary. The chemical structures of the metabolites were determined using several spectroscopic methods, including NMR and GC/MS and MS of 1-eicosanol (1), cycloartenol (2), trans-squalene (3), pentadecanoic acid (4), and β-sitosterol (5). This study is a first attempt to isolate and identify secondary metabolites from the ovary of N. nucifera. The results indicated that the extract of N. nucifera ovary has biological effects, such as antibacterial and -tumor activity. Therefore, it could decrease the risk of HIV transmission through breastfeeding.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.6
• /
• pp.695-703
• /
• 2011

Objective: This study was to investigate the effects of coordinated upper-limb body postures on the subjective discomfort rating, heart rate, and muscle activities. Background: Although generally many checklists such as OWAS, RULA, and REBA were applied to evaluate various body postures, the body postures were might be overestimated or underestimated because each body part(i.e., back, shoulder, and elbow etc.) was evaluated separately, and then added all rates of individual body parts to assess an overall risk level for the body posture in these methodologies. Methods: A total of 20 participants maintained 14 postures which were combinations of back, shoulder, and elbow flexion angles and then muscle activities, subjective discomfort, and heart rates were collected every three minute during a sustained 15 minute and 0.5kg weight holding task. Four muscle groups were investigated: erector spine, anterior deltoid, upper trapezius, triceps brachii. Results: Results showed that subjective discomfort was the lowest when the angle of back and shoulder were both $0^{\circ}s$, while the body posture with $45^{\circ}$ of back angle and $45^{\circ}$ shoulder angle was rated as the most subjective discomfort posture. In general, the subjective discomfort ratings increased as back and shoulder flexion angles increased. It was noted that, however, the subjective discomfort of body posture with a $45^{\circ}$ back angle and $45^{\circ}$ shoulder flexion angle was lower than that of body posture with a $0^{\circ}$ back and $45^{\circ}$ shoulder flexion angle. The research findings of heart rates and muscle activities showed similar results for the analyses of subjective discomfort ratings. Conclusions: The possible limitations of the current ergonomics evaluation techniques which assessing a body posture with summing all body part score after individually analyzed in this study. Based on the analyses of subjective discomfort, heart rate, and muscle activities, it was recommended that a use of effects of coordinated upper-limb body postures would be considered when one evaluates work-load for various working postures. Application: These findings can be used for developing a more accurate assessment checklist for working posture as well as preventing musculoskeletal disorders of workers in workplaces.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.4
• /
• pp.97-115
• /
• 2017

The Purpose of this is to Examine the Effects of Collaborative Relations of Supplier- Buyer, Sustainable Supply Chain Management(SCM) Sctivities, and Collaborative Performance in Automobile-part Companies. The Proposed Research Model is Tested using Structural Equation Modeling for Hypotheses based on the Data Collected from 274 Firms. The Results Indicate that Collaborative Relations of Supplier-buyer Positively Affect Sustainable SCM Activities. In Addition, Sustainable SCM Activities Positively Affects Collaborative Performance. The Results of the Study Show that Collaborative Relations of Supplier-buyer is Positively Associated with Sustainable SCM Activities in both Supplier and Buyer Firms. Sustainable SCM Activities have a Significant Impact on Collaborative Performance in both Parts. In Addition, Collaborative Relations of Supplier-buyer have a Significant Impact on Collaborative Performance of Buyer Firms but Supplier. This Study would Provide Useful Information for Collaboration between Supplier and Buyer to have a Long-term Strategic Relationship on Sustainable SCM Activities, which Impact on Collaborative Performance and Competitive Advantages.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7250-7255
• /
• 2015

The objective of this study is to experimentally investigate the heating performances of the portable air combustion heater using diesel fuel for auxiliary cabin heating of the battery electric vehicle. In order to evaluate the heating performances of the air combustion heater, the heating capacity was calculated by the temperature at inlet and outlet parts of the considered heater and the inner temperature distribution characteristics of the vehicle were measured during 1600 seconds with an interval of 1 second. The theoretical efficiency of the tested heater was calculated by temperature data of the air of supplying and exhausting to the cabin. As the air passed the heat-sink, the air temperature at the end of heat-sink reached to $101.3^{\circ}C$ and the difference of temperature on heat-sink was 67.8%. The average heating capacity of the air combustion heater showed 2.0 kW. After 1800 seconds, the inner temperature of the vehicle cabin was continuously increased. The temperatures of the top side and the bottom side of the car cabin under consideration were increased upto $42.5^{\circ}C$ and $24.3^{\circ}C$, respectively, and the theoretical efficiency of the tested heater was on average 63.7%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5438-5442
• /
• 2011

In order to use as weight-reduced sintered parts for automobiles, mechanical properties of sintered compacts of 2712 Al-alloys containing 0, 10, 20, and 33% ceramics, respectively, were investigated in this study. (1)Regardless of ceramic contents, all sintered compacts possessed 4~7% pores. (2)After aging the compacts sintered for 12 minutes, tensile strength of the 2712 Al-alloys containing 0, 10, 20, and 33% ceramics was 165, 260, 256, and 166 N/$mm^2$, respectively, whereas those aged after sintering for 30 minutes exhibited the tensile strength of 186, 229, 219, and 202 N/$mm^2$, respectively. In addition, the 2712 sintered compact containing 10% ceramics showed the maximum elongation of about 3.6%, (3)After aging the 10% ceramic-containing sintered compacts reached a maximum apparent hardness ($H_RF$) of 97. (4)The minimum wear volume ($174{\times}10^{-3}mm^3$) was shown in the 10% ceramic-containing 2712 sintered compact after aging. From these results, the 2712 sintered compact containing 10% ceramics thought to be the most suitable one for the fabrication of aluminum engine part.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.609-618
• /
• 2017

This paper presents the quantitative evaluation method for technologies acquired from the defense offset program. We firstly deduced the consideration in development by gathering the opinions of 128 experts by conducting a survey. Next, we made up an additional 49 experts for developing a performance management system of the offset program. The management system covered 4 technology fields which are defense R&D, depot maintenance, performance improvement, and manufacturing. The development procedure was composed of 4 parts: setting-up of work process, defining performance indicators, calculating weighted values of each indicator, and devising quantitative method. The results of this research could be used for enhancing the effectiveness of the offset program in 3 ways: establishing a systematic work process after acquisition of technology in offset program, establishing the positive feedback architecture by providing incentives to superior institute or company which is appointed through quantitative performance evaluating, and publicizing and promoting quantified outstanding performances for contributing to advance the offset program.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.378-385
• /
• 2017

This study investigated the design of a snap fit, which is widely used for fastening plastic parts. We analyzed the assembly mechanism of a lock snapfit, measured the assembly force and separation force based on the design of experiments, and derived a regression equation through an analysis of variance. The response surface methodology was also used. Polybutylene terephthalate was used to fabricate specimens, and the assembly force and separation force were measured using a micro-tensile tester. The length, width, thickness, and interference were considered as factors. A second-order regression model was used to derive the regression equation. The assembly force decreased with increasing length and width, but it increased with increasing thickness and interference. The finite element method was used to analyze the assembly mechanics. The width decreased the assembly force by increasing the ductility. The influences of the factors for low assembly force and high release force were shown to be opposite to each other. It was necessary to design a structure that minimized the assembly force while maintaining an appropriate level of separation force.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5477-5485
• /
• 2011

This study comparatively analyzed the instrumentation and the voicing structure, which were shown in the film music titled "Star Wars-Main Title" by John Williams(1932~), with analytical technique that the writer mapped out, and aimed to discover the progression principle in orchestration based on the results. Also, it applied a functional part-division method that was classified and distributed into 3 functional parts according to auditory cognitive level as for each of functional elements such as the musical element. And, it made it pattern for the vertical structure and the voicing structure in musical instruments, which were distributed to each functional part based on this, and comparatively analyzed the standard point in a change which were shown according to progression of music, namely, the operating technique. As for the results of this study, first, each theme has specific instrumentation pattern. Unity was emphasized by consistently organizing those things in exposition, reprise, and recapitulation of each theme. To reinforce diversity, an attempt was made such as adding and reducing auxiliary instruments in the middle part and the rear part. Second, even in a change of instrumentation pattern by passage in accordance with a change in theme amid each part, the same instrumental group was organized in the middle part, thereby having maintained unity. Third, to strengthen diversity by clause, which is forming each theme, a continuous change in voicing pattern was created by adding or omitting a part. Fourth, the voicing concentration was maintained the structure of "thinness-thickness" in the whole musical piece. However, in part 2 that is repeated theme 3, diversity was pursued with a unique change of "thickness-thickness." Fifth, in part 4 that is indicated theme 4, the other diversity was intensified with the inverted range in the front part and the middle part. Accordingly, based on the conclusions that were indicated in this work, it is desired to be conducive to understanding the horizontal consideration and the progression principle of orchestration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3491-3498
• /
• 2015

The purpose of this study is to identify demand of fusion education in the field of architecture and urban, according to architecture and urban market changing, product changing, increasing fusion education demand. We conducted online surveys targeting construction and non construction field practitioners so that we want to identify consumer's needs about fusion education in the field of architecture and urban. Research findings can be summarized in three parts. First, practitioners need to fuse business-related majors (Frequency changing ratio : financing(716.7%), management(633.3%), planning(454.5%) etc.) and traditional majors. Second, the survey results show that 79 percent of those questioned were in favor of switching the cyber and off-line operation methods for fusion education. They require the complementary education system between off-line and cyber education based on education accessability. Third, the survey results show that 70.9 percent of those questioned were in favor of limited freestyle(Freedom of choices without required subjects). The curriculum should be arranged according to the flow of construction business process including fusion subjects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1207-1215
• /
• 2015

The smartphone addiction research to identify the pattern according to your smartphone addiction. Recovery of 689 to 1429 parts by distributing the total recovery is 48.22%, respectively. Were utilized to study 650 data. Smartphone addiction group was divided into low, group care, group into three groups according to the degree of severity smartphone addiction. The response that smartphone addiction severity group 135 people 86.5%, lower addiction group 59 people% smartphone smartphones note 165 people group 50.2%, 35.5 'no' do you think about the own smartphone addiction (p <0.001). Showed that exceeds 50% of the smartphone severe poisoning group and attention should use having a chat group with respect to the smart phone. Also showed that beyond a midnight bed time group the more severe the smartphone addiction. Usual findings for bedtime showed a tendency to sleep late pass midnight smartphone addiction show higher water shortage phenomenon. Could be used as the basis for the study which may be a healthy life to predict the degree of occurrence of a pattern according to the type of smart phone poisoning by identifying the factors of the individual according to the degree of poisoning smartphone pattern.