• Proceedings of the Korean Magnetic Resonance Society Conference
• /
• 2000.01a
• /
• pp.26-26
• /
• 2000

• Journal of Venture Innovation
• /
• v.7 no.2
• /
• pp.1-17
• /
• 2024

This study analyzed the effect of moving into an industrial park on the performance of a company using data from individual companies. In addition, regional variables were additionally set, and industrial complexes were divided into metropolitan and non-metropolitan areas for comparison. Data were collected through KIS-2022 (manufacturing) to verify the hypothesis. In the case of the analysis method, multiple regression analysis and Propensity Score Matching(PSM) were first used. The analysis results are as follows. First, it was found that companies that moved into industrial park had a positive effect on innovation performance than companies that did not move in. Second, in terms of financial performance, there was no statistically significant difference between companies that moved into the industrial park and those that did not. Third, there was a significant difference between companies that moved into industrial park and those that did not, depending on the metropolitan and non-metropolitan areas. Based on these analysis results, policy and academic implications could be presented.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.1
• /
• pp.99-104
• /
• 2002

This paper presents a method of sensitivity analysis for the infeasible interior point method when a new variable is introduced. For the sensitivity analysis in introducing a new variable, we present a method to find an optimal solution to the modified problem. If dual feasibility is satisfied, the optimal solution to the modified problem is the same as that of the original problem. If dual feasibility is not satisfied, we first check whether the optimal solution to the modified problem can be easily obtained by moving only dual solution to the original problem. If it is possible, the optimal solution to the modified problem is obtained by simple modification of the optimal solution to the original problem. Otherwise, a method to set an initial solution for the infeasible interior point method is presented to reduce the number of iterations required. The experimental results are presented to demonstrate that the proposed method works better.

• The Journal of Korea Robotics Society
• /
• v.12 no.2
• /
• pp.206-216
• /
• 2017

This paper proposes a method to simultaneously estimate two degrees of freedom in wrist forces (extension - flexion, adduction - abduction) and one degree of freedom in grasping forces using Electromyography (EMG) signals of the forearms. To correlate the EMG signals with the forces, we applied a multi - layer perceptron(MLP), which is a machine learning method, and used the characteristics of the muscles constituting the forearm to generate learning data. Through the experiments, the similarity between the MLP target value and the estimated value was investigated by applying the coefficient of determination ($R^2$) and root mean square error (RMSE) to evaluate the performance of the proposed method. As a result, the $R^2$ values with respect to the wrist flexion-extension, adduction - abduction and grasping forces were 0.79, 0.73 and 0.78 and RMSE were 0.12, 0.17, 0.13 respectively.

• Environmental Engineering Research
• /
• v.22 no.3
• /
• pp.266-276
• /
• 2017

A life cycle impact assessment was applied in an industrial waste incineration plant to evaluate the direct and indirect environmental impacts based on toxicity and non-toxicity categories. The detailed life cycle inventory of material and energy inputs and emission outputs was compiled based on the realistic data collected from a local industrial waste incineration plant, and the Korean life cycle inventory and ecoinvent database. The functional unit was the treatment of 1 tonne of industrial waste by incineration and the system boundary included the incineration plant and landfilling of ash. The result on the variation of the impact by the unit processes showed that the direct impact was decreased by 79.3, 71.6, and 90.1% for the processes in a semi dry reactor, bag filter, and wet scrubber, respectively. Considering the final impact produced from stack, the toxicity categories comprised 91.7% of the total impact. Among the toxicity impact categories, the impact in the eco-toxicity category was most significant. A separate estimation of the impact due to direct and indirect emissions showed that the direct impact was 97.7% of the total impact. The steam recovered from the waste heat of the incineration plant resulted in a negative environmental burden.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1288-1293
• /
• 2009

The TES (Thermal Energy Storage) cooling system utilizing cheaper off-peak electricity has been applied just for building air-conditioning currently and causes limitation of usage rate and inefficiency of national resources utilization. In this regard, more says the necessity to apply TES system in industrial cooling system which is longer using period and wider usage. In this study, we will approve the technical and economical improvement in efficiency of industrial cooling system applied TES system by utilizing cheaper off-peak electricity and it will attribute the promotion of TES system and stabilization of supply and demand of electric power by proving the necessity to develop more efficient industrial cooling system by combining TES system.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.7
• /
• pp.1272-1275
• /
• 2017

Two dimeric sesquiterpenes were separated from Chloranthus japonicus Sieb. and identified as shizukaols C and F. They exhibited potent antifungal activities ($MICs=4-16{\mu}g/ml$) in vitro against various plant pathogenic fungi (Pythium ultimum, Phytophthora infestans, Botrytis cinerea, Colletotrichum lagenarium, Alternaria kikuchiana, and Magnaporthe grisea). Shizukaol C showed 88% and 91% protective activities in the greenhouse against Puccinia recondita (wheat leaf rust) and Phytophthora infestans (tomato late blight), respectively, at $100{\mu}g/ml$; shizukaol F exhibited 93% antifungal activity against Puccinia recondita at the same concentration. Therefore, these compounds might serve as interesting candidates for effective antifungal agents.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.4
• /
• pp.1-7
• /
• 2011

Korea enacted the occupational safety and health law in order to prevent industrial accidents in 1981. Led by ministry of labor, occupational safety and health support services policy has been built through government-affiliated organizations, research institutions and academic research. Korea's accident rate has remained at 0.7% for last 10 years despite continuous efforts over the last 30 years. These results means that the occupational safety and health support services policy conducted by the government have reached their limits. Therefore, the necessity of assessment about occupational safety and health support services policy is proposed. The main objective of this study, through the IPA analysis, is to grasp the point of worker's needs about occupational safety and health support services policy and to help formulate the efficient policy.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.3
• /
• pp.274-282
• /
• 2002

This paper discusses a multi-dimensional analysis for Customer Relationship Management (CRM). For this, We propose a decision-making methodology which employs three analysis models. The first model is a three-dimension positioning map to derive a strategy which achieves the Process Value Line (PVL). The second model is the web-shape analysis model to visibly understand the individual based on the customer CSI (Customer Satisfactory Index) data. The third model which supports the web-shape analysis model, is the relative satisfactory analysis model. It considers a satisfaction level after purchasing against before purchasing. Then we perform overall analysis based on the three analysis models to provide marketing strategies to decision makers.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1809-1811
• /
• 2003

Oil-TR에서의 이상을 진단하기 위해서, 유중가스 분석 및 AE센서를 사용한 부분방전측정을 중심으로 많은 연구가 진행/적용되어왔다. 근래 들어서는 거의 모든 진단항목이 환선상태에서 측정하는 것으로 전이되는 추세이며, 사용자가 설비의 현재의 상태를 계속 감시하여 수명을 연장시키는데 관심의 초점이 모아지고 있다. 이에 본 논문에서는 Spiral-Type의 광대역 UHF센서를 사용하여 TR에서 발생하는 부분방전을 측정하였다. 이 방식은 TR내부에 센서를 주입하는 방식으로서, 상대적으로 감도가 우수하며, 노이즈의 영향이 적게 받는다. 코로나방전, 표면방전 및 부유물 형태의 결함에 대하여 측정한 결과를 나타내었으며, 주파수 분포에 대한 변화를 주로 관측하였다. 결과적으로, 서로 다른 결함은 서로 다른 결과를 나타내었으며, 이를 바탕으로 Oil-TR에서 발생하는 결함을 인식할 수 있는 데이터로 활용할 수 있다.