• Title/Summary/Keyword: Industrial Accidents

Search Result 1,363, Processing Time 0.034 seconds

Study on the Chemical Management - 2. Comparison of Classification and Health Index of Chemicals Regulated by the Ministry of Environment and the Ministry of the Employment and Labor (화학물질 관리 연구-2. 환경부와 고용노동부의 관리 화학물질의 구분, 노출기준 및 독성 지표 등의 특성 비교)

  • Kim, Sunju;Yoon, Chungsik;Ham, Seunghon;Park, Jihoon;Kim, Songha;Kim, Yuna;Lee, Jieun;Lee, Sangah;Park, Donguk;Lee, Kwonseob;Ha, Kwonchul
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.25 no.1
    • /
    • pp.58-71
    • /
    • 2015
  • Objectives: The aims of this study were to investigate the classification system of chemical substances in the Occupational Safety and Health Act(OSHA) and Chemical Substances Control Act(CSCA) and to compare several health indices (i.e., Time Weighted Average (TWA), Lethal Dose ($LD_{50}$), and Lethal Concentration ($LC_{50}$) of chemical substances by categories in each law. Methods: The chemicals regulated by each law were classified by the specific categories provided in the respective law; seven categories for OSHA (chemicals with OELs, chemicals prohibited from manufacturing, etc., chemicals requiring approval, chemicals kept below permissible limits, chemicals requiring workplace monitoring, chemicals requiring special management, and chemicals requiring special heath diagnosis) and five categories from the CSCA(poisonous substances, permitted substances, restricted substances, prohibited substances, and substances requiring preparation for accidents). Information on physicochemical properties, health indices including CMR characteristics, $LD_{50}$ and $LD_{50}$ were searched from the homepages of the Korean Occupational and Safety Agency and the National Institute of Environmental Research, etc. Statistical analysis was conducted for comparison between TWA and health index for each category. Results: The number of chemicals based on CAS numbers was different from the numbers of series of chemicals listed in each law because of repeat listings due to different names (e.g., glycol monoethylether vs. 2-ethoxy ethanol) and grouping of different chemicals under the same serial number(i.e., five different benzidine-related chemicals were categorized under one serial number(06-4-13) as prohibited substances under the CSCA). A total of 722 chemicals and 995 chemicals were listed at the OSHA and its sub-regulations and CSCA and its sub-regulations, respectively. Among these, 36.8% based on OSHA chemicals and 26.7% based on CSCA chemicals were regulated simultaneously through both laws. The correlation coefficients between TWA and $LC_{50}$ and between TWA and $LD_{50}$, were 0.641 and 0.506, respectively. The geometric mean values of TWA calculated by each category in both laws have no tendency according to category. The patterns of cumulative graph for TWA, $LD_{50}$, $LC_{50}$ were similar to the chemicals regulated by OHSA and CCSA, but their median values were lower for CCSA regulated chemicals than OSHA regulated chemicals. The GM of carcinogenic chemicals under the OSHA was significantly lower than non-CMR chemicals($2.21mg/m^3$ vs $5.69mg/m^3$, p=0.006), while there was no significant difference in CSCA chemicals($0.85mg/m^3$ vs $1.04mg/m^3$, p=0.448). $LC_{50}$ showed no significant difference between carcinogens, mutagens, reproductive toxic chemicals and non-CMR chemicals in both laws' regulated chemicals, while there was a difference between carcinogens and non-CMR chemicals in $LD_{50}$ of the CSCA. Conclusions: This study found that there was no specific tendency or significant difference in health indicessuch TWA, $LD_{50}$ and $LC_{50}$ in subcategories of chemicals as classified by the Ministry of Labor and Employment and the Ministry of Environment. Considering the background and the purpose of each law, collaboration for harmonization in chemical categorizing and regulation is necessary.

Factors Related with Job Satisfaction in Workers - Through the Application of NIOSH Job Stress Model - (직장인의 직무만족도 관련요인 분석 - NIOSH의 직무스트레스 모형을 적용하여 -)

  • Kim, Soon-Lae;Lee, Bok-Im;Lee, Jong-Eun;Rhee, Kyung-Yong;Jung, Hye-Sun
    • Research in Community and Public Health Nursing
    • /
    • v.14 no.2
    • /
    • pp.190-199
    • /
    • 2003
  • This study was conducted to determine the factors affecting job satisfaction in workers by using the Job Stress Model proposed by the National Institute for Occupational Safety and Health (NIOSH). Data were collected from December 1 to December 30, 1999. The subjects were 2,133 workers employed at 155 work sites, who were examined using NIOSH Job Stress questionnaire translated by the Korea Occupational Safety ${\pounds}|$ Health Academy and Occupational Safety ${\pounds}|$ Health Research Institute. SAS/PC program was used for statistical analysis using descriptive analysis. Pearson's correlation coefficient, ANOVA, and Stepwise multiple regression analysis. The results of this study were as follows. 1. According to general characteristics of the subjects, job satisfaction was high in those with less number of children. 2. By work condition, job satisfaction was higher in those who were working in a permanent job position, were working with regular time basis than with shift basis, were working in regular shift hours than in changing shift hours, were working for a short period, and were working less hours and overtime works per week. 3. In terms of physical work environment, job satisfaction was significantly related to 10 physical environmental factors. In other words, job satisfaction was high in workers who were working in an environment with no noise, bright light, temperature adjusted to an appropriate level during summer and winter, humidity adjusted to an appropriate level. well ventilation, clean air, no exposure to hazardous substance during work hour, overall pleasant work environment and not crowded work space. 4. By work-related factors, job satisfaction was high in those with less ambiguity about future job and role, high job control/autonomy, and less workload. On the other hand, job satisfaction was low in those with little utilization of competencies, and much role conflict at work and workload. 5. As for the relationships between job satisfaction and the non-work related factors, job satisfaction was high in workers who were volunteering at different organizations or active in religious activities for 5-10 hours per week. 6. In the relationships between job satisfaction and buffering factors, significantly positive correlations were found between job satisfaction and factors such as support by direct superior, support by peers, and support by spouse, friend and family. 7. There were nine factors that affected job satisfaction in the workers: age, number of children, work hours per week, noise, temperature at the work site during summer, uncomfortable physical environment, role ambiguity, role conflict, ambiguity in job future, work load, no utilization of competencies and social support from direct supervisor. These nine factors accounted for 26% of the total variance in the multiple regression analysis. In conclusion. the following are proposed based on the results of this study. 1. The most important physical environmental factors affecting job satisfaction in workers were noise, role ambiguity, and work load, suggesting a need to develop strategies or programs to manage these factors at work sites. 2. A support system that could promote job satisfaction is needed by emphasizing the roles of occupational health nurses who may be stationed at work sites and manage the factors that could generate job stress. 3. Job satisfaction is one of the three acute responses to stress proposed in NIOSH job stress model (job satisfaction. physical discomfort and industrial accidents). Therefore, further studies need to be conducted on the other two issues.

  • PDF

Development of a Dynamic Offtracking Model on Horizontal Curve Sections (Based on Articulated Vehicles) (도로 평면곡선부에서 동적궤도이탈모형 개발에 관한 연구 (굴절차량을 중심으로))

  • 최재성;김우현
    • Journal of Korean Society of Transportation
    • /
    • v.20 no.3
    • /
    • pp.115-128
    • /
    • 2002
  • Dislike the tangent sections, the horizontal curve sections of roads should be designed, considering several factors : one of such factors is widening. In other words, since widening results from that when a vehicle runs on the horizontal curve sections, the rear wheels of the vehicle run not along with tracks of the front wheels but out of that, such offtracking should be exactly investigated and reflected in design of the curve sections. Especially in the case of industrial roads which semi-trailers and large trucks run frequently or arterial roads with small curve radiuses in mountainous regions. serious offtracking Phenomenons result in increasing the risk of accidents. decreasing the capacities and jeopardizing pedestrians' safety on the curve sections. For the offtracking, widening amounts of roads has been determined under the traditional presumption that vehicles run at a low speed and there is no superelevation. In fact, however, since the vehicles run at a high speed as well as at a low speed and the superelevation is installed on the horizontal curve sections in the structural aspect of roads, the existing standards for installing widening have a limitation to reflect exactly actual Phenomenons. In particular, for articulated wheel axles of a tractor and a trailer and long articulated vehicles, not only the offtracking degree is very high but also the interpretation shows different aspects from one of single axles. Comparing and reviewing the results of Korean and foreign studies related to the trailer offtracking model theory and the standards for installing widening, this study developed a realistic dynamic offtracking model which considers geometric structures of roads and speeds of vehicles, suggested how to measure widening with this model and examined applicability of the model. The findings of this study are as follows ; First. a dynamic offtracking model. which considers dynamic movements of a tractor and a trailer and the superelevation, was developed. Second, a new method to measure widening with the developed dynamic offtracking model was developed and a method to measure widening with swept path width was suggested as well. Finally, validity of the current standards for installing widening was examined by determining actual offtracking and widening amounts with the developed model and the applicability was investigated through the case studies. Compared with the existing offtracking models, the dynamic offtracking model developed in this study can reflect practically vehicle speed. dimension and geometric structural aspects of roads. In conclusion, the meaning of this study is that it reviews validity of the current standards for installing widening and provides a base to establish such standards by suggesting new methods to measure the widening with this dynamic offtracking model.

Standardization of Identification-number for Processed Food in Food-traceability-system (가공식품에 대한 이력추적관리번호 부여체계의 표준화 방안)

  • Choi, Joon-Ho
    • Journal of Food Hygiene and Safety
    • /
    • v.27 no.2
    • /
    • pp.194-201
    • /
    • 2012
  • Facing a number of global food-related accidents, the concept and system for food traceability have been designed and introduced in many countries to manage the food-safety risks. To connect and harmonize the various food traceability-information in food traceability system according to the food supply chain, the coding system of identification-number for food-traceability has to be standardized. The GTIN (Global Trade Item Number) barcode system which has been globally standardized and implemented, is reviewed with the mandatory food-labeling regulation in expiration date of processed foods. The integration of GTIN-13 bar-code system for food-traceability is a crucial factor to expand its function in the food-related industrial areas. In this literature, the standard coding system of identification-number for food-traceability is proposed with 20 digit coding number which is combined with GTIN-13 bar-code (13 digit), expiration date (6 digit), and additional classification code (1 digit). This proposed standard coding system for identification-number has a several advantages in application for prohibiting the sale of hazard goods, food-recall, and inquiring food traceability-information. And also, this proposed coding system could enhance the food traceability system by communicating and harmonizing the information with the national network such as UNI-PASS and electronic Tax-invoice system. For the global application, the identification-number for food-traceability needs to be cooperated with the upcoming global standards such as GTIN-128 bar-code and GS1 DataBar.

Relationship between Sleep Insufficiency and Excessive Daytime Sleepiness (수면 부족과 과도한 주간졸림증의 관련성)

  • Choi, Yun-Kyeung;Lee, Heon-Jeong;Suh, Kwang-Yoon;Kim, Leen
    • Sleep Medicine and Psychophysiology
    • /
    • v.10 no.2
    • /
    • pp.93-99
    • /
    • 2003
  • Objectives:Sleep loss and excessive daytime sleepiness may have serious consequences, including traffic and industrial accidents, decreased productivity, learning disabilities and interpersonal problems. Yet despite these adverse effects, there are few epidemiological studies on sleep loss and daytime sleepiness in the general population of Korea. This study investigates the number of people who suffer from sleep insufficiency, how much recovery sleep occurs on weekends, and the relationship between the amount of recovery sleep and daytime sleepiness. Methods:A total 164 volunteers, aged 20 and over, were recruited by advertisement. The subjects were workers and college students living in Seoul, Korea. Subjects were excluded if they were aged over 60;if they had medical, neurological, psychiatric or sleep disorders that could cause insomnia or daytime sleepiness;if they were not following a regular sleep schedule;if they traveled abroad during the study;or if they did not leave home to work or were shift workers. They were interviewed and given a sleep log to complete on each of 14 consecutive mornings. They also completed the Epworth Sleepiness Scale (ESS) at noontime on the last day of the second week. All statistical data were analyzed by t-test, $X^2$-test or ANOVA, using SPSS/PC+. Results:The results showed that the subjects woke up at 6:50 (${\pm}1$:16) on weekdays, 7:09 (${\pm}1$:29) on Saturdays, and 8:12 (${\pm}1$:39) on Sundays and holidays. They took more frequent and longer naps on Sundays than on weekdays and Saturdays. The mean sleep duration was 6h 35 min. on week nights, with a mean increase of about 1h on weekends. Only 9.1% of the subjects spent more than 8h in bed on week nights, with 67% spending less than 7h, and 49.4% reported recovery sleep of more than 1h on Sundays. The subjects who reported recovery sleep of more than 2h on Sundays, showed significantly more excessive daytime sleepiness than those who reported less than 30 min (F=2.62, p<.05). Conclusions:These findings suggest that sleep insufficiency and excessive daytime sleepiness are relatively common in Korea, and that the people who get insufficient sleep on weekdays try to compensate for sleep loss with oversleeping and daytime napping on Sundays and holidays. It appeared that daily sleep insufficiency had a cumulative effect and increased daytime sleepiness.

  • PDF

A Statistical Study on the Key Words in the Titles of Nursing Related Theses (학위논문의 주요어 분석 (간호학 및 간호학관련 학위논문을 중심으로 : 1960-1991. 8))

  • 고옥자;김상혜;김희걸;이금재;이영숙
    • Journal of Korean Academy of Nursing
    • /
    • v.24 no.1
    • /
    • pp.58-69
    • /
    • 1994
  • In order to see the development of Nursing related research activities in Korea over the last three decades, abstracts of almost all of the Master and Ph.D theses that appeared from 1961 up to August 1991 were collected. The number of theses was 2354, from which an index of key words has been constructed. Key words were defined as those terms in each thesis title that convey major objectives of the given thesis study and the important nursing concepts dealt with in the thesis. Although all the key words were picked from the thesis title only, full use was made of the abstracts in deciding the principal objectives and essential contents of the thesis studies and their important concepts as well. In total, 539 kinds of key words were identified from the 2354 titles, and the identified words were all found to be in the International Nursing Index. On an average each title has two key words. Which key words were most frequently used, how they have changed with time, what kind of concept is preferably dealt with by each graduate school, and the concepts to which a given key word is likely to be connected were examined. The results are summerized below : 1) For each decade the theses numbers were as follows : 54(2.3%) from the 60’s, 413(17.5%) from the 70’s, 1523(64.7%) from the 80’s, and 364(15.5%) from the 90’s. Master’s thesis contributed 96% (2252) of the papers and Ph. D’s theses filled the remaining 4%(102). 2) A total of 539 key words were used, averaging about 2 for each thesis. The most frequently used key words were ‘Nurse’, ‘Anxiety’, ‘Knowledge / Attitude /Practice’, ‘Stress /Stressor’, ‘Attitude’, ‘Job-Satisfaction’, ‘Mental Disorder’, ‘Operation’, ‘Elderly’, ‘Nursing Role’. 3) Each decades key words can be classified as : the 60’s : ‘Nursing Education’, ‘Pulmonary Tuberculosis’, ‘Mother-Child Health’, ‘Growth & Development’, ‘Public Facilities’, ‘Mental Disorder’ : the 70’s : ‘Nurse’, ‘Family Planning’, ‘Attitude’ / ‘Knowledge, Attitude / Practice’, ‘Curriculum in Nursing Education’, ‘Clinical Practice in Nursing’, ‘Analysis of the Work of the Nurse’, ‘Health Education of School’, : the 80’s : ‘Nurse’, ‘Anxiety’, ‘Stress /Stressor’, ‘Operation’, ‘Nursing Role’, ‘Job Satisfaction’ : the 90’s : ‘Nurse’, ‘Elderly’, ‘Family-Support’, ‘Stress /Stressor’, ‘Home Care’. Key word ‘Nurse’ appears continuously and most frequently through the years, which indicates that there has been active study of the characteristics of nurses and related fields. The concept ‘Anxiety’ has been studied steadly from the 80’s and it shows that interest in health and disease are increasing Which comes as a result of society changing to an industrial and informational community. 4) Looking into each graduate school’s study area key words ‘Anxiety’, ‘Nurse’, ‘Mental Disorder’, ‘Stress /Stressor’, ‘Operation’, ‘Attitude’, ‘Hemo-dialysis’, were studied in the regular graduate school : ‘Family Planning /Contraception’, ‘Knowledge / Attitude /Practice’, ‘Physical Health-State /Physical Health Examination’, ‘Nurse’, ‘Using Clinical Facilities’, ‘Health Education of School’, were studied in the Graduate School of Public Health’ ; ‘Nurse’, ‘Anxiety’, ‘Stress / Stressor’, ‘Job-Satisfaction’, ‘Clinical Practice Education’, ‘Nursing Education’, were studied in the Graduate School of Education : ‘Nurse’, ‘Job Satisfaction’, ‘Nursing Role’, ‘Administration - Employment /Employment Management’, ‘Leadership’, ‘Personnel Profile’, ‘Nursing Manpower / Changing Working Place’, were studied in the Graduate School of Public Administration. 5) The Connection between key words were : ‘Nurse Job Satisfaction’, ‘Stress / Stressor ⇔ Coping / Ajustment’, ‘Nurse ⇔ Nursing Role’, ‘Anxiety ⇔ Giving Information’, ‘Nurse ⇔ Stress / Stressor’, ‘Anxiety ⇔ Operation’, ‘Nurse ⇔ Burnout’, ‘Knowledge, Attitude, Practice ⇔ Family Planning’, ‘Nurse Administration ⇔ Employment’, ‘Anxiety Muscle ⇔ Relaxation Technic’, ‘Anxiety ⇔ Mental Disorder’. From the above it can be noted that many nursing concepts were handled in the thesis titles. But there were more than enough papers on the characteristics of the nurse. It is suggested that in depth research be made on ‘Nursing Accidents’, t-‘Ethics’, ‘Nurse - Patient Interactions’, ‘Spritual Care’, ‘Dying’, ‘Hospice’, ‘Resident Helper’ and that there should be in depth research relating to the physical and mental development of youth and in particular physical concepts like ‘Drug - Abuse’, ‘Child -Abuse and Teaching’.

  • PDF

Variation of Indoor Air Temperature by using Hot Water Piping in Greenhouse (온수배관에 의한 온실 내부의 온도변화)

  • Yoon, Yong-Cheol;Shin, Yik-Soo;Bae, Seoung-Beom;Kim, Hyeon-Tae;Choi, Jin-Sik;Suh, Won-Myung
    • Journal of agriculture & life science
    • /
    • v.46 no.2
    • /
    • pp.179-190
    • /
    • 2012
  • This study was performed to obtain a heat saving effect and enhance the efficiency of a greenhouse by using a hot water piping in order to minimize the operating costs of a greenhouse as oil prices continue to rise. This method also reduces the likelihood of accidents caused by snowdrifts in regions with heavy snowfall. In general, the experimental plot was $2.0{\sim}6.0^{\circ}C$ higher than the control plot. When the skylight felt was opened, the minimum temperature was in the range of $3.0{\sim}12.0^{\circ}C$. Therefore, we judged that damage caused by snowdrifts may be prevented partly by active heating. The temperature difference inside of the greenhouse by height was insignificant. The maximum heating load of the greenhouse according to crop was respectively about $37,000kcal{\cdot}h^{-1}$ and $41,700kcal{\cdot}h^{-1}$. During the experiment, the heat value of each designed temperature in the range of the minimum ambient temperature $-11.9{\sim}4.0^{\circ}C$ was about 95,000~322,000 kcal and it was in the range of $6,050{\sim}20,900kcal{\cdot}h^{-1}$. If it is compared with the maximum heating load, it can be shown that about 15~56% of the heating energy can be supplied. The total heat value and the amount of power consumption were 2,629,025 kcal and 677.3 kWh respectively during the experiment. If it is heated with diesel, a fossil fuel, the consumption during the experiment was 291 L and the cost was 331,700won. Total cost of using electric power was about 24,400 won and it is shown that it is about 7.5% of the cost of diesel consumption. Also, if the total amount of power consumption is converted into energy, it is approximately 582,200 kcal and the energy was just about 22% of the total heat value.

Christian Sabbath and Christian Education in the Era of 'Life Crisis' ('생명 위기'의 시대, 기독교의 안식, 그리고 기독교교육)

  • Ryu, Sam Jun
    • Journal of Christian Education in Korea
    • /
    • v.67
    • /
    • pp.339-375
    • /
    • 2021
  • The author considers that contemporary society has entered the era of 'life on earth in peril' as a very serious situation in comparison with the past, and assumes that this life-in-peril situation, known as 'life crisis,' is one of the most urgent and important issues in Christian education as well as in public education. This urgency and importance is mainly based on the belief that Christianity is the religion of life that values all living beings' life and all Christians have the sacred vocation to cope with this crisis of life on earth, given by the life-giving God. For this reason, this study aims at identifying some tasks that Christian education should perform in the era of imperiled life, premising that diverse life-threatening situations and circumstances in today's world are closely related to the Christian Sabbath. More specifically, first of all, this article analyzes some notable phenomena of the life crisis in the contemporary world, such as deaths from intentional self-harm (suicides), deaths from industrial accidents and disasters, the real-life situation of vulnerable populations, people's indifference and insensitivity to the situation, and natural environmental degradation, by reflecting on current global issues as well as issues in Korea. This paper also criticizes neoliberalism, productivism, consumerism, economic materialism, egotism, and anthropocentrism as ideologies for causing these phenomena. After the criticism, the author interprets, from biblical and theological perspectives on the Christian Sabbath, main purposes and meanings of the Sabbath for contemporary society that are deeply connected with the crisis of life on earth: confessing that God takes the initiative to govern every creature's living and being; building the relationship with the God who has given the power of life to all living beings; practicing the Sabbath rest by living a holy life; and participating in the Sabbath rest as 'life-giving ministry.' In conclusion, this article suggests Christian educational practices that confront the life crisis, rooted in the purposes and meanings of the Christian Sabbath: reminding participants of the belief that God is the source of life on earth; cultivating 'life literacy'; helping people to resist the crisis of life; and encouraging humans to pursue the well-being and peace of both humanity and the earth.

Designing and Fabricating of the High-visibility Smart Safety Clothing (고시인성 스마트 안전의류의 설계 및 제작)

  • Park, Soon-Ja;Kim, Sun-Woong
    • Science of Emotion and Sensibility
    • /
    • v.23 no.4
    • /
    • pp.105-116
    • /
    • 2020
  • The purpose of this study is to progress the limitations and disadvantages of existing safety clothing by applying high technology to current safety clothing that is produced and distributed only with fluorescent fabrics and retroreflective materials. Therefore, the industrial suspender-type safety belt and engineering technology are introduced, designed, and fabricated to help save a life in an emergency. First, the suspender-type safety belt to be developed is designed to emit light by LED attached to the film, and the body of the belt-wearer is recognized from a distance through retroreflection from the flashing LED. It aims to support people's safety by preventing accidents during roadside work, rescue activities, and sports activities at night. Second, with the development of advanced devices when the user is in an unconscious state due to distress or falls into an unconscious state due to distress or accident, the tilt sensor of the control unit attached to the belt automatically detects the angle of the human body and generates light and sound. It is intended to further enhance the utilization by mounting a sensing and signaling device that generates a distress signal and shaping it in the form of a belt attached to a vest that can be easily detached from the outside of the garment. When the wearer falls due to an accident, the tilt sensor of this belt detects the angle change and then the controller generates a high-frequency sound and repeated LED blinking signals at the same time. In the case of conventional safety vests, it is almost impossible to detect that the person is wearing a vest when there is no ambient light, but in case of the safety belts in this study, the sound and light signals of the safety belt enable us to find the wearer within 100 meters even when there is no ambient light.

A Study on Major Safety Problems and Improvement Measures of Personal Mobility (개인형 이동장치의 안전 주요 문제점 및 개선방안 연구)

  • Kang, Seung Shik;Kang, Seong Kyung
    • Journal of the Society of Disaster Information
    • /
    • v.18 no.1
    • /
    • pp.202-217
    • /
    • 2022
  • Purpose: The recent increased use of Personal Mobility (PM) has been accompanied by a rise in the annual number of accidents. Accordingly, the safety requirements for PM use are being strengthened, but the laws/systems, infrastructure, and management systems remain insufficient for fostering a safe environment. Therefore, this study comprehensively searches the main problems and improvement methods through a review of previous studies that are related to PM. Then the priorities according to the importance of the improvement methods are presented through the Delphi survey. Method: The research method is mainly composed of a literature study and an expert survey (Delphi survey). Prior research and improvement cases (local governments, government departments, companies, etc.) are reviewed to derive problems and improvements, and a problem/improvement classification table is created based on keywords. Based on the classification contents, an expert survey is conducted to derive a priority improvement plan. Result: The PM-related problems were in 'non-compliance with traffic laws, lack of knowledge, inexperienced operation, and lack of safety awareness' in relation to human factors, and 'device characteristics, road-drivable space, road facilities, parking facilities' in relation to physical factors. 'Management/supervision, product management, user management, education/training' as administrative factors and legal factors are divided into 'absence/sufficiency of law, confusion/duplication, reduced effectiveness'. Improvement tasks related to this include 'PM education/public relations, parking/return, road improvement, PM registration/management, insurance, safety standards, traffic standards, PM device safety, PM supplementary facilities, enforcement/management, dedicated organization, service providers, management system, and related laws/institutional improvement', and 42 detailed tasks are derived for these 14 core tasks. The results for the importance evaluation of detailed tasks show that the tasks with a high overall average for the evaluation items of cost, time, effect, urgency, and feasibility were 'strengthening crackdown/instruction activities, education publicity/campaign, truancy PM management, and clarification of traffic rules'. Conclusion: The PM market is experiencing gradual growth based on shared services and a safe environment for PM use must be ensured along with industrial revitalization. In this respect, this study seeks out the major problems and improvement plans related to PM from a comprehensive point of view and prioritizes the necessary improvement measures. Therefore, it can serve as a basis of data for future policy establishment. In the future, in-depth data supplementation will be required for each key improvement area for practical policy application.