Acknowledgement
본 연구는 2020학년도 경기대학교 대학원 연구원장학생 장학금 지원에 의하여 수행되었음.
References
- S. Lee, K. Kim, D. Ko, Y. Yoon, and Y. Cho, An experimental study on the combustion and emission characteristics of hydrogen enriched lpg fuel in a constant volume chamber, Transaction of the Korean Hydrogen and New Energy Society, 23, 227-235 (2012). https://doi.org/10.7316/KHNES.2012.23.3.227
- P. Biswas and C. Y. Wu, Control of toxic metal emissions from combustors using sorbents: A Review, J. Air Waste Manag. Assoc., 48, 113-127 (1998). https://doi.org/10.1080/10473289.1998.10463657
- Y. Manohara, S. E. Hosseini, B. Butler, H. Alzhahrani, B. T. F. Senior, T. Ashuri, and J. Krohn, Hydrogen fuel cell vehicles; current status and future prospect, Appl. Sci., 9, 2296 (2019).
- S. E. Hosseini, A. M. Andwari, M. A. Wahid, and G. Bagheri, A review on green energy potentials in Iran, Renew. Sust. Energ. Rev., 27, 533-545 (2013). https://doi.org/10.1016/j.rser.2013.07.015
- M. Granovskii, I. Dincer, and M. A. Rosen, Greenhouse gas emissions reduction by use of wind and solar energies for hydrogen and electricity production: Economic factors, Int. J. Hydrog. Energy, 32, 927-931 (2007).
- L. Giorgi1 and F. Leccese, Fuel cells: Technologies and applications, The Open Fuel Cells Journal, 6, 1-20, (2013).
- A. Kerviel, A. Pesyridis, A. Mohammed, and D. Chalet, An evaluation of turbocharging and supercharging options for high-efficiency fuel cell electric vehicles, Appl. Sci., 8, 2474 (2018).
- C. Wang, M. H. Nehrir, and H. Gao, Control of PEM fuel cell distributed generation systems, IEEE Trans. Energy Convers., 21, 586-595 (2006). https://doi.org/10.1109/TEC.2005.860404
- T. Somekawa, K. Nakamura, T. Kushi, T. Kume, K. Fujita, and H. Yakabe, Examination of a high-efficiency solid oxide fuel cell system that reuses exhaust gas, Appl. Therm. Eng., 114, 1387-1392 (2017). https://doi.org/10.1016/j.applthermaleng.2016.10.096
- M. Y. Ayad, M. Becherif, and A. Henni, Vehicle hybridization with fuel cell, supercapacitors and batteries by sliding mode control, Renew. Energ., 36, 2627-2634 (2011). https://doi.org/10.1016/j.renene.2010.06.012
- U. K. Chakraborty, A new model for constant fuel utilization and constant fuel flow in fuel cells, Appl. Sci., 9, 1066 (2019).
- A. Costilla-Reyes, C. Erbay, S. Carreon-Bautista, A. Han, and E. Sanchez-Sinencio, A time-interleave-based power management system with maximum power extraction and health protection algorithm for multiple microbial fuel cells for internet of things smart nodes, Appl. Sci., 8, 2404 (2018).
- S.-M. Lim, S.-W. Sung, Y.-K. Lee, and J.-W. Kim, Technical trends of hydrogen fuel cell railway rolling stock, 2018 Annual Meeting and Autumn Conference of the Korean Society for Railway, October 18-19, Jeju, Korea (2018).
- C. Kim and S. Kim, Technology development trends for environmentally friendly hydrogen railway vehicles, Railw. J., 23, 15-20 (2020).
- H. J. Ahn, S. H. Lee, N. Hur, M. K. Lee, and G. Yong, The numerical simulation of hydrogen jet diffusion for hydrogen leakage in the enclosed geometry, J. Comput. Fluids Eng., 14, 32-38 (2009).
- H. Xie, X. Li, and D. M. Christopher, Emergency blower ventilation to disperse hydrogen leaking from a hydrogen-fueled vehicle, Int. J. Hydrog. Energy, 40, 8230-8238 (2015). https://doi.org/10.1016/j.ijhydene.2015.03.146
- H. W. Ji, H. Lee, I. Hwang, and H. Jang, Safe ventilation methods against leaks in hydrogen fuel cell rooms in homes, Energies, 15, 5434 (2022).
- M. R. Swain and M. N. Swain, Passive ventilation systems for the safe use of hydrogen, Int. J. Hydrogen Energy, 21, 823-835 (1996). https://doi.org/10.1016/0360-3199(96)00002-X
- D. Lomot and Z. Karpinski, Hydrogen oxidation over alumina-supported palladium-nickel catalysts, Res. Chem. Intermed., 41, 9171-9179 (2015). https://doi.org/10.1007/s11164-015-1935-3
- D. Y. Lee and S. S. Kim, A Study on the H2 oxidation over Pt/TiO2, SO2 poisoning and regeneration, Appl. Chem. Eng., 30, 731-736 (2019).
- S. A. Singh, K. Vishwanath, and G. Madras, Role of hydrogen and oxygen activation over Pt and Pd-doped composites for catalytic hydrogen combustion, ACS Appl. Mater. Interfaces, 9, 19380-19388 (2017). https://doi.org/10.1021/acsami.6b08019
- Y. Jang, S. M. Lee, and S. S. Kim, Effect of a modified 13X zeolite support in Pd-based catalysts for hydrogen oxidation at room temperature, RSC Adv., 11, 38047-38053 (2021). https://doi.org/10.1039/D1RA06395B
- Y. Jang, S. M. Lee, and S. S. Kim, A optimization study on the preparation and coating conditions on honeycomb type of Pd/TiO2 catalysts to secure hydrogen utilization process safety, J. Korea Org. Resour. Recycl. Assoc., 29, 47-54 (2021).
- H. Jouhara, N. Khordehgah, S. Almahmoud, B. Delpech, A. Chauhan, and S. A. Tassou, Waste heat recovery technologies and applications, Therm. Sci. Eng. Prog., 6, 268-289 (2018). https://doi.org/10.1016/j.tsep.2018.04.017
- H. Eom, Y. Jang, S. Y. Choi, S. M. Lee, and S. S. Kim, Application and regeneration of honeycomb-type catalysts for the selective catalytic oxidation of H2S to sulfur from landfill gas, Appl. Catal. A-Gen., 590, 117365 (2020).
- J. Lyer, T. Moore, D. Nguyen, P. Roy, and J. Stolaroff, Heat transfer and pressure drop characteristics of heat exchangers based on triply periodic minimal and periodic nodal surfaces, Appl. Therm. Eng., 209, 118192 (2022).