• Computers and Concrete
• /
• 제23권3호
• /
• pp.171-188
• /
• 2019

This study proposed a new and efficient 2D damage-plasticity model within the framework of Isogeometric analysis (IGA) for the geometrically nonlinear damage analysis of concrete. Since concrete exhibits complicated material properties, two internal variables are introduced to measure the hardening/softening behavior of concrete in tension and compression, and an implicit gradient-enhanced formulation is adopted to restore the well-posedness of the boundary value problem. The numerical results calculated by the model is compared with the experimental data of three benchmark problems of plain concrete (three-point and four-point bending single-notched beams and four-point bending double-notched beam) to illustrate the geometrical flexibility, accuracy, and robustness of the proposed approach. In addition, the influence of the characteristic length on the numerical results of each problem is investigated.

• 한국지반공학회논문집
• /
• 제18권4호
• /
• pp.207-214
• /
• 2002

미소변형에서 대변형에 이르는 전체 변형도 영역의 구성모델을 ABAQUS 코드에 구현하였다. 구성모델은 비등방경화규칙에 근거한 전응력 개념의 탄소성 모델이다. 사용된 정식화 및 알고리즘은 (1) Jaumann 응력속도를 이용한 대변형도 조건 정식화 (2) 내재적 인 응력적분 (3) 일관된 접선계수를 포함하고 있다. 이를 통하여 비등방경화 구성관계를 적용한 대변형 해석을 정확하고 효율적으로 수행할 수 있는 토대를 구축하였다. 동반논문(전병곤 등, 2002)에서는 예제해석을 통하여 새로운 구성모델과 ABAQUS 코드를 이용한 대변형 해석결과를 기술하였다.

• 대한기계학회논문집A
• /
• 제25권4호
• /
• pp.574-581
• /
• 2001

Transient linear elastodynamic problems are numerically analyzed in a time-domain by the Finite Element Method, for which the variational formulation based upon the equations of motion in convolution integral is newly derived. This formulation is implicit and does not include the time derivative terms so that the computation procedure is simple and less assumptions are required comparing to the conventional time-domain dynamic numerical algorithms, being able to get the improved numerical accuracy and stability. That formulation is expanded using the semi-discrete approximation to obtain the finite element equations. In the temporal approximation, the time axis is divided equally and constant and linear time variations are assumed in those intervals. It is found that unconditionally stable numerical results are obtained in case of the constant time variation. Some numerical examples are given to show the versatility of the presented formulation.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1950-1963
• /
• 1995

A modification of the approximate-factorization method is made to accelerate the convergency rate and to take sufficiently large Courant number without loss of accuracy. And a stable implicit finite-difference scheme for solving the incompressible Navier-Stokes equations employed above modified method is developed. In the present implicit scheme, the volume fluxes with contravariant velocity components and the pressure formulation in curvilinear coordinates is adopted. In order to satisfy the continuity condition completely and to remove spurious errors for the pressure, the Navier-Stokes equations are solved by a modified SMAC scheme using a staggered gird. The upstream-difference scheme such as the QUICK scheme is also employed to the right hand side. The implicit scheme is unconditionally stable and satisfies a diagonally dominant condition for scalar diagonal linear systems of implicit operator on the left hand side. Numerical results for some test calculations of the two-dimensional flow in a square cavity and over a backward-facing step are obtained using both usual approximate-factorization method and the modified one, and compared with each other. It is shown that the present scheme allows a sufficiently large Courant number of O(10$^{2}$) and reduces the computing time.

• 한국전산유체공학회지
• /
• 제19권1호
• /
• pp.27-33
• /
• 2014

A new and efficient implicit scheme is proposed to obtain a steady-state solution in time integration and the comparison of characteristics with the approximation ways for the implicit method to solve the incompressible Navier-Stokes equations is provided. The conservative, finite-volume cell-vertex upwind scheme and artificial compressibility method using dual time stepping for time accuracy is applied in this paper. The numerical results obtained indicate that the direct application of Jacobian matrix to the Lower and upper sweeps of implicit LU-SGS leads to better performance as well as convergence regardless of CFL number and true time step than explicit scheme and approximation of Jacobian matrix. The flow simulation around box in uniform flow with unstructured meshes is demonstrated to check the validity of the current formulation.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제9권3호
• /
• pp.191-197
• /
• 2009

Up to now, a number of models have been proposed and discussed to describe a wide range of inelastic behaviors of materials. The fatal problem of using such models is however the existence of model errors, and the problem remains inevitably as far as a material model is written explicitly. In this paper, the authors define the implicit constitutive model and propose an implicit viscoplastic constitutive model using neural networks. In their modeling, inelastic material behaviors are generalized in a state space representation and the state space form is constructed by a neural network using input-output data sets. A technique to extract the input-output data from experimental data is also described. The proposed model was first generated from pseudo-experimental data created by one of the widely used constitutive models and was found to replace the model well. Then, having been tested with the actual experimental data, the proposed model resulted in a negligible amount of model errors indicating its superiority to all the existing explicit models in accuracy.

• 한국지반공학회지:지반
• /
• 제12권4호
• /
• pp.145-156
• /
• 1996

연약한 지반의 거동을 적절하게 표현할 수 있는 일반 등방경화 규칙에 근거한 비등방경화 구성모델을 비선형 유한요소해석에 적용하기 위하여 내재적인 응력적분기법을 정식화하였다. 정식화된 응력적분기법은 비선형 해석시에 필요한 응력을 일반 사다리꼴규칙에 의하여 내재적으로 적분하고 응력변형률 접선계수를 비선형 해법에 일관되게 도출할 수 있다. 이러한 알고리즘을 통하여 해의 정확도 및 수렴도를 확보할 수 있으므로, 비등방경화 구성 관계를 적용한 비선형 해석을 정확하고 효율적으로 수행할 수 있는 토대를 구축할 수 있었다.

• 한국전산유체공학회지
• /
• 제2권2호
• /
• pp.26-34
• /
• 1997

An implicit viscous turbulent flow solver is developed for two-dimensional geon unstructured triangular meshes. The flux terms are discretized based on a cell-centered formulation with the Roe's flux-difference splitting. The solution is advanced in time us backward-Euler time-stepping scheme. At each time step, the linear system of equation approximately solved wi th the Gauss-Seidel relaxation scheme. The effect of turbulence is with a standard k-ε two-equation model which is solved separately from the mean flow equation the same backward-Euler time integration scheme. The triangular meshes are generated advancing-front/layer technique. Validations are made for flows over the NACA 0012 airfoil. Douglas 3-element airfoil. Good agreements are obtained between the numerical result experiment.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1997년도 추계 학술대회논문집
• /
• pp.29-37
• /
• 1997

An implicit viscous turbulent flow solver is developed for two-dimensional geometries on unstructured triangular meshes. The flux terms are discretized based on a cell-centered finite-volume formulation with the Roe's flux-difference splitting. The solution is advanced in time using an implicit backward-Euler time-stepping scheme. At each time step, the linear system of equations is approximately solved with the Gauss-Seidel relaxation scheme. The effect of turbulence effects is approximated with a standard $k-{\varepsilon}$ two-equation model which is solved separately from the mean flow equations using the same backward-Euler time integration scheme. The triangular meshes are generated using an advancing-front/layer technique. Validations are made for flows over the NACA0012 airfoil and the Douglas 3-element airfoil. Good agreements are obtained between the numerical results and the experiment.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.75-78
• /
• 2005

The static implicit finite element method is applied effectively to analyze back inner panel stamping processes, which include the forming stage Analysis results examining possibility and validity of the formulation and the factor of study are presented. Further, the simulated results for f/apron panel stamping processes are shown and discussed. Its application is being increased especially in the automotive industrial area for the cost reduction, weight saving, and improvement of strength.