• 한국전기전자재료학회논문지
• /
• 제20권11호
• /
• pp.977-982
• /
• 2007

The realization of the photoresist(PR) removal method with vaporized water and ozone gas mixture has been studied for the LCD TFT array manufacturing. The developed PR stripper uses the water boundary layer control method based on the high concentration ozone production technology. We develop the prototype of PR stripper and experiment to find the optimal process parameter condition like as the ozone gas flow/concentration, process reaction time and thin boundary layer formation. As a results, we realize the LCD PR strip rate over the 0.4 ${\mu}m/min$ and this PR removal rate is more than 5 times higher than the conventional immersion type ozonized water process.

• Restorative Dentistry and Endodontics
• /
• 제27권5호
• /
• pp.521-529
• /
• 2002

The purpose of this study was to compare the shaping time of two shaping methods and the leakage of three different obturation techniques. Ninty three canaled human molar teeth were used, which were randomly divided into two groups of forty teeth each and ten control teeth. After working length determination, the one group was prepared crown-down technique using rotary root canal instruments of GT rotary files .12/20, .10/20, .08/20 and .06/20 taper(Maillefer Instrument SA. Switzerland). The other group was instrumented with Gates Glidden burs(#1, #2, and #3) to coronal preparation and GT rotary files .08/20 and .06/30 taper to apical preparation. Shaping time was measured. After root canals were instrumented, they were divided to three subgroups and obturated as follows : Subgroup 1, obturated with single cone method Subgroup 2, obturated with lateral condensation : Subgroup 3, obturated with continuous wave technique. Three subgroups were obturated using non-standardized gutta-percha cone(Diadent, Korea, .06 or .08 taper) and AH-26(Dentsply DeTrey, Germany) as a root canal cement. Ten unobturated teeth served as positive and negative controls. After immersion in 2% methylene blue solution for 1 month, the teeth were washed during 24h. The teeth were demineralized in 10% nitric acid and dehydrated by immersion in 80, 90 and 100% ethyl alcohol. The teeth were finally cleared and stored in 100% methylsalicylate, and apical dye penetration was evaluated under stereomicroscope(Leica M420, LC, U.S.A)at $\times$8.75 magnification. Liner measurement of dye penetration was assessed with the use of digitalized image analysing system (analySIS, GmbH, Germany) The data were analysed statistically using independent T-test and Two-way ANOVA and Tukey test. The result were as follows 1. In canal prepared with GT$^{TM}$ rotary file, shaphing time taked more than the group of using Gates Glidden drill to coronal preparation without statistical significance (p>0.05) 2. The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files showed significantly more apical leakage than those of lateral condensation and continuous wave technique regardless of shaping method (p<0.05). 3 The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files and Gates Glidden drill showed significantly more apical leakage than those of continuous wave technique regardless of shaping method (p<0.05). 4. Regardless of shaping method, The group of continuous wave obturation showed less apical leakage than those of lateral condensation without statistical significance (p>0.05). 5. The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files and Gates Glidden drill showed more apical leakage than the group of lateral condensation using same shaping method with-out statistical significance (p＞0.05).

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권1호
• /
• pp.142-156
• /
• 2015

A new method for ship Inner Shell optimization, which is called Parametric Inner Shell Optimization Method (PISOM), is presented in this paper in order to improve both hull performance and design efficiency of transport ship. The foundation of PISOM is the parametric Inner Shell Plate (ISP) model, which is a fully-associative model driven by dimensions. A method to create parametric ISP model is proposed, including geometric primitives, geometric constraints, geometric constraint solving etc. The standard optimization procedure of ship ISP optimization based on parametric ISP model is put forward, and an efficient optimization approach for typical transport ship is developed based on this procedure. This approach takes the section area of ISP and the other dominant parameters as variables, while all the design requirements such as propeller immersion, fore bottom wave slap, bridge visibility, longitudinal strength etc, are made constraints. The optimization objective is maximum volume of cargo oil tanker/cargo hold, and the genetic algorithm is used to solve this optimization model. This method is applied to the optimization of a product oil tanker and a bulk carrier, and it is proved to be effective, highly efficient, and engineering practical.

• Design & Manufacturing
• /
• 제16권2호
• /
• pp.46-52
• /
• 2022

As the consumer market in the eco-friendly vehicle industry grows, the demand for water pump in a electric car parts market. This study intend to propose a mathematical model that can verify the effect of improving thermal properties when a non-conductive cooling filler liquid is introduced into an electric vehicle water pump. Also, the pros and cons of the immersion cooling method and future development way were suggested by analyzing the cooling characteristics using on the derived analysis solution. Thermal characteristics analysis of electric water pump applied with non-conductive filler liquid was carried out, and the diffusion boundary condition in the motor body and the boundary condition the inside pump were expressed as a geometric model. As a result of analyzing the temperature change for the heat source of the natural convection method and the heat conduction method, the natural convection method has difficulty in dissipating heat because no decrease in temperature due to heat release was found even after 300 sec. Also, it can be seen that the heat dissipation effect was obtained even though the non-conductive filling liquid was applied at the 120 sec and 180 sec in the heat conduction method. It has proposed to minimize thermal embrittlement and lower motor torque by injecting a non-conductive filler liquid into the motor body and designing a partition wall thickness of 2.5 mm or less.

• 한국콘텐츠학회논문지
• /
• 제10권9호
• /
• pp.410-420
• /
• 2010

본 연구는 경찰조직 여가스포츠참여자의 참여만족에 따른 조직유효성 및 조직헌신도의 관계를 규명하는데 목적이 있다. 연구대상은 2009년 광주광역시에 근무하고 있는 경찰공무원 중 여가스포츠에 참여하고 있는 경찰공무원을 대상으로 편의표본추출법을 이용하여 5개 경찰서를 선정, 총 200명을 표집하여 불성실하거나 수거되지 않은 27부를 제외한, 최종 173부의 설문자료를 사용하였다. 분석 결과는 다음과 같다. 첫째, 참여만족의 하위변인인 공익기여, 사회인정, 개인성취는 조직유효성의 하위변인인 직무만족과 조직 몰입 모두에 영향을 미치는 것으로 나타났다. 둘째, 참여만족의 하위변인인 공익기여, 사회인적, 개인성취는 조직헌신도의 하위변인인 가치헌신에는 공익기여, 사회인정 변인에서 영향을 미쳤으며, 근속헌신에는 공익기여와 개인성취에서 영향을 미치는 것으로 나타났다. 셋째, 조직유효성의 하위변인인 직무만족, 조직몰입은 조직헌신도의 하위변인인 가치헌신에는 모두 영향을 미쳤으며, 근속헌신에는 조직몰입만이 영향을 미치는 것으로 나타났다.

• Composites Research
• /
• 제30권1호
• /
• pp.71-76
• /
• 2017

본 연구에서는 환경인자에 노출된 탄소섬유/에폭시 복합재의 층간전단강도를 이용하여 장기 성능을 예측하였다. 필라멘트와인딩 공법으로 제작된 층간전단시편은 분위기 온도가 $50^{\circ}C$, $70^{\circ}C$, $100^{\circ}C$인 건조 조건과 분위기 온도가 $25^{\circ}C$, $50^{\circ}C$, $70^{\circ}C$인 침수 조건에 각각 3000시간까지 노출시켰다. 연구결과에 따르면 분위기 온도가 $50^{\circ}C$와 $70^{\circ}C$인 건조 상태에서는 층간전단강도가 노출시간에 따라 크게 변하지 않지만 분위기 온도가 $100^{\circ}C$인 건조 상태에서는 노출시간이 길어지면 후경화로 인해 다소 증가한다. 그러나 분위기 온도가 $25^{\circ}C$인 침수 상태의 경우 층간전단강도는 노출 초기에 크게 변하지 않다가 노출시간이 길어지면 감소하고 감소 정도는 분위기 온도가 높아지면 커진다. 각 분위기 온도에 대한 층간전단강도 선형회귀식은 침수 상태에 3000시간까지 노출된 시편에서 얻은 층간전단강도에서 구할 수 있었다. 이들 선형 회귀식을 이용하면 층간전단강도는 분위기 온도가 $25^{\circ}C$와 $50^{\circ}C$인 경우 측정값의 5.5% 이내, 분위기 온도가 $70^{\circ}C$인 경우 측정값의 2.3% 이내로 예측이 가능하였다. 따라서 제시된 성능 예측 절차는 환경인자에 노출된 탄소섬유/에폭시 복합재의 장기 층간전단강도를 잘 예측할 수 있다.

• 대한의용생체공학회:의공학회지
• /
• 제17권3호
• /
• pp.327-336
• /
• 1996

This study was performed to investigate the effec% of immersion in water and thermal cycling on the mechanical peoperties of light cured restorative composite resins. Five commerically available light-cured composite resins(Photo Clearfil A : CA, Lite-Fil A . LF, Clearril Photo Posterior CP, Prisms AP.H.. PA, 2100 : ZH) were unto The specimens of 12 m in diameter and 0.7 m in thickness were made, and an immersion in $37^{\circ}C$ water for 7 days and a thermal cycling of 1000 cycles at 15 second dwell time each in $5^{\circ}C$ and $55^{\circ}C$ baths were performed. Biaxial flexure test was conducted using the ball-on-three-ball method at the crosshead speed of 0.5mm/min. In order to investigate the deterioration of composite resins during the thermal cycling test, Weibull analysis for the biaxial flexure strengths was done. Fracture surfaces and the surfaces before and after the thermal cycling test were examined by SEM. The highest Weibull modulus value of 10.09 after thermal cycling tests which means the lowest strength variation, was observed in the CP group, and the lowest value of 4.47 was obsered in the LF Group. Biaxial flexure strengths and Knoop hardness numbers significantly decreased due to the thermal cycling ($\textit{p}$< 0.01), however, they recovered when specimens were drie4 The highest biaxial flexure strength of 125.65MPa was observed in the ZH group after the thermal cycling test, and the lowest value of 64.86MPa was observed in the CA group. Biaxial flexure strengths of ZH and CP groups were higher than those of PA, CF, and CA groups after thermal cycling test($\textit{p}$< 0.05). Knoop hardness numbers of CP group after the thermal cycling test was the highest(95.47 $\pm$ 7.35kg/$mm^2$) among the samples, while that of CA group was the lowest(30.73 $\pm$ 2.58kg/$mm^2$). Knoop hardness numbers showed the significant differences between the CP group and others after the thermal cycling test(($\textit{p}$< 0.05). Fracture surfaces showed that the composite resin failure developed along the matrix resin and the filler/resin interface region, and the cracks propagated in the conical shape from the maximum tensile stress zone.

• 대한치과보철학회지
• /
• 제41권2호
• /
• pp.136-147
• /
• 2003

Statement of problem : Ceramic and composite resin have been used to fulfill the demand for esthetic prosthesis. However, ceramic is easy to break and wears off the opposite natural teeth. Conventional composite resin also has low abrasive resistance and color stability. Ceramic Optimized Polymer (ceromer) was developed in mid-1990s to overcome the shortfalls of ceramic and composite resin. Ceromer has similar abrasiveness with the natural tooth and has relatively high strength. Color stability affects esthetics and long-term prognosis of the prosthesis. Purpose The purpose of this study was to compare color stability of ceromers(2 types : $Artglass^{(R)}$. $Targis^{(R)}$) with ceramics ($Vintage^{(R)}$-polishing, $Vintage^{(R)}$-glazing). Material and Method : The color difference(${\Delta}E^*$) was measured by spectrophotometer with different immersion time. Twenty disks, 3mm in thickness and 10mm in diameter, were fabricated for each specimen in shade A2(Vita Lumin shade guide), Specimens (5 samples in each group) were immersed in the food colorants (Red no.3. Yellow no.4, Blue no.1, Distilled water) for 24 hours, 48 hours and 72 hours respectively. $L^*,\;a^*$ and $b^*$ value were measured with spectrophotometer (CM 503i : Minolta Co., Japan) and mean ${\Delta}E^*$ value was calculated for statistical analysis Results : The results of this study were obtained as follows. 1. The ${\Delta}E^*$ values of all test samples increased with the time of immersion. 2. The ${\Delta}E^*$ values of all materials increased in order of Distilled Water, Yellow no.4, Blue no.1 and fed no.3. There was significant difference between Red no.3 and the other food colorants(p<0.05). 3. The ${\Delta}E^*$ values increased in order of $Vintage^{(R)}$-glazing, $Vintage^{(R)}$-polishing. $Artglass^{(R)}$ and $Targis^{(R)}$. There was significant difference between $Vintage^{(R)}$-glazing and the other materials (p<0.05). Conclusion : By means of the above results, immersion time was found to be a critical factor for color stability of ceromer. For the long-term color stability of prosthesis it is recommended patients having ceromer prosthesis ($Artglass^{(R)},\;Targis^{(R)}$) to reduce the habitual intake of Red no.3 colorants con taming foods.

• 한국식품과학회지
• /
• 제31권6호
• /
• pp.1511-1517
• /
• 1999

$5^{\circ}C$로 냉각한 전해산화수를 사용, 상치를 대상으로 하여 침지, 분사, 유수 및 다단침지법에 따른 세척방법별 살균효과 및 저장중 품질변화를 조사한 결과, 세척방법에 따른 미생물 살균효과는 전해산화수로 2분간 3회 처리한 다단 침지방식이 가장 우수하였으며, 2분간 3회 처리한 다단 침지방식으로 처리한 후 포장하여 $10^{\circ}$ 저장시의 품질변화에 있어서는, 초기 총균수는 전해산화수 처리구가 무처리구 및 수도수 처리구에 비해 각각 1/300 및 1/100정도 낮았고, 대장균군수도 침지 초기에는 전해산화수 처리구가 $3.1{\times}10^3CFU/g$으로 무처리구의 1/3,000 수준으로 매우 낮게 나타났으나 저장 3일 후부터는 무처리구와 유사한 수준이었다. 저장중의 색도변화는 전해산화수 처리구가 무처리 및 수돗물 처리구에 비해 L 및 b값이 다소 높게 나타났으며, 클로로필 함량은 초기에 무처리구보다 9% 적은 값을 나타내었으나 저장기간이 경과하면서 무처리구와 거의 같은 수준으로 감소하였다. 폐기율은 저장 6일까지 전해산화수로 침지한 상치가 가장 낮게 나타났으며, 종합적 기호도는 저장 3일까지, 외관적 품질은 저장 6일까지 전해산화수 처리구가 무처리구보다 좋은 것으로 나타났다.

• 한국재난정보학회 논문집
• /
• 제19권3호
• /
• pp.698-709
• /
• 2023

연구목적: 본 논문에서는 기후변화로 기존 도심지 침수 발생이 증가하는 현 상황에서 공동주택 단지에 소규모 우수저류시설을 계획하였을 때 기존 하류부 도심지 침수량 증가율과 기존 도심지 침수량 저감 정도를 분석하고자 한다. 연구방법: 미국환경보호청 SWMM 모델을 활용해서 대규모 하수도 모델을 구축하고 시뮬레이션을 통해 하류부 기존 도심지 침수영향을 분석하였다. 구축한 모델은 개발지구, 하류부 기존 도심지, 우수를 방류하는 하천유역 전체를 포함하였다. 연구결과: 대규모 개발행위 시 연구 대상지역에서 공동주택 블록별로 최소 우수저류조 용량을 산정하여 시뮬레이션한 결과, 하류부 기존 도심지에서 방재성능목표강우량 1시간 기준 4,893㎥, 2시간 기준 25,815㎥, 3시간 기준 55,528㎥의 침수량을 저감할 수 있을 것으로 나타났다. 결론: 본 연구와 같이 하류부 기존 도심지까지 고려한 대규모 침수 시뮬레이션을 실시하였을 때 하류부 도심지 침수가 크게 증가하는 것을 알 수 있고, 개발전 공동주택 단지 블록별로 필요한 우수저류조 용량을 계획하고 개발시 비용 지원 등으로 우수저류조 건설을 권장한다면 하류부 기존 도심지 홍수 부담을 감소시킬 수 있다.