• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1989.10a
• /
• pp.59-64
• /
• 1989

Daylight is regarded by most people as preferred light source for interior lig-hting. With poper design, daylight can save electric lighting during daytime. This paper attemptes to show that bett-er use of daylight might be the balanced use of supplementary artificial lighting at times and places where the natural 1-ighting is inadequate with consequent c-ost and energy saving.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1993.10a
• /
• pp.11-16
• /
• 1993

쾌적한 환경을 제공하기 위한 조명은 보건 위생 및 작업 능률 등에 커다란 영향을 미친다. 그러나 적절하지 못한 조명은 전술한 내용을 약화시키며 에너지 낭비를 초래하게 된다. 그러므로 적절한 조도기준이 필요하다. 본 연구에서는 세계각국의 조도기준 자료를 수집 분석하고 우리나라 사람을 대상으로 한 실험결과를 적용하여 우리나라에 적합한 조도기준을 설정하였다. 본 연구의 결과는 조도설계 및 관리의 효율화 및 작업능률의 극대화를 이룰수 있으며, 조명 에너지 관리의 효율화를 통한 에너지 절감의 효과를 얻을 것이라 기대된다.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.1204-1208
• /
• 2012

A new photoelectrode composed of $Sb_6O_{13}$ nanoparticles with the size of 20-30 nm has been prepared via thermolysis of a colloidal antimony pentoxide tetrahydrate ($Sb_2O_5{\cdot}4H_2O$) suspension. The $Sb_6O_{13}$ electrode showed good semiconducting properties applicable to dye-sensitized solar cells (DSSCs); the energy band gap was estimated to be $3.05{\pm}0.5$ eV and the position of conduction band edge was close to those of $TiO_2$ and ZnO. The DSSC assembled with the $Sb_6O_{13}$ photoelectrode and a conventional ruthenium-dye (N719) exhibited the overall photo-current conversion efficiency of 0.74% ($V_{oc}$ = 0.76 V, $J_{sc}=1.99\;mAcm{-2}$, fill factor = 0.49) under AM 1.5, $100\;mWcm^{-2}$ illumination.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.1
• /
• pp.1-8
• /
• 2010

Some methods employing the Active Contour Model have been widely used to extract face contour. Their performance, however, depends on the initial position of the model and the coefficients of the energy function which should be reconsidered whenever illumination and environmental condition of an input image is changed. Additionally, the number of points in the contour model should increase drastically in order to extract a fine contour. In this paper, we thus propose a novel approach which extracts face contour by segmenting the face region with threshold values obtained by a histogram analysis technique in the separated region of input image. The proposed method shows good performance under various illumination and environmental condition since it extracts face contour by considering the characteristics of the input image.

• Journal of Korean Ophthalmic Optics Society
• /
• v.1 no.2
• /
• pp.49-55
• /
• 1996

Hydrogenated amorphous carbon(a-C:H) films were fabricated by the low-frequency (60Hz) glow discharge of the mixture of methane and hydrogen, and their electrical properties were investigated. We observed that a-C:H films show the persistent photoconductivity(PPC) by illumination of heat-filtered while light for a few seconds. The PPC was about 10 times larger than the annealed dark conductivity. The samples clearly showed metastable characteristics. With increasing illumination times from 1 to 100 min, the annealing activation energy of the PPC was about 0.39eV. The annealing temperature at which the PPC disappeared increasing from $100^{\circ}C$ to $130^{\circ}C$. Illumination longer than 80 min leads to the formation of ${\pi}$ defects and to the decrease of PPC. From these results, we tentatively propose that the states in the ${\pi}$ band act as deep trap centers generating the metastabilities.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.4
• /
• pp.548-561
• /
• 2020

Paecilomyces japonica is widely cultured to produce mycelium for medicinal and health food use. Illumination is an important factor in the growth and production of mycelium in submerged culture. The effects of different light-emitting diode (LED) combinations on the growth and cordycepin content as bioactive substances of mycelium were investigated. The results showed that the mycelium dry weights were lower under dark condition and red LED treatments. Dark condition, fluorescent light, and ultraviolet-A failed to increase the cordycepin content. Blue light was necessary to increase the cordycepin content, and a red-to-blue ratio of 3:7 induced the highest cordycepin content. The cordycepin contents of mycelium in submerged culture were significantly higher in a 12 h/day illumination time under red and blue (red-to-blue ratio of 3:7) LED treatments, showing an increase of up to 38% compared with those under the fluorescent-light control condition. The results demonstrated the roles of light with different wavelengths on the biosynthesis of cordycepin as bioactive substances. The low-heat release and replacement of traditional fluorescent lights with low-energy-consuming LEDs could increase the contents of bioactive substances. After optimization of the cordycepin production using response surface methodology (Box-Behnken design) to its canonical form, the optimum combination was found to be as follows: illumination time = 17.7 h/day, sugar content in the medium = 9.7 g/50 mL, and incubation time = 61.2 h. The model predicted a maximum response of 3779.2 ㎍/mL cordycepin yield.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.2
• /
• pp.201-207
• /
• 2012

Pulsed lasers at the 613 nm and 1064 nm wavelengths on nanoseconds have been utilized to characterize the damage on Si photodiode exposed to intense illumination. Morphological damages and structural changes at sites on the photodiode irradiated during microseconds of laser pulses were analyzed by FE-SEM images and XRD patterns, respectively. The removal of oxide coating, ripple, melting marks, ridges, and crater on photodiodes were definitely observed in order of increasing the pulse intensities generated above the damage threshold. Then, the degradation in photosensitivity of the Si photodiode irradiated by high power density pulses was measured as a function of laser irradiation time at the various wavelengths. The free charge carrier and thermal diffusion mechanisms could have been invoked to characterize the damage. The relative photosensitivity data calculated using the thermal diffusion model proposed in this paper have been compared with the experimental data irradiated above the damage threshold.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.74-79
• /
• 2014

Illumination is an effective technique that must be in the mankind today. These lights, there is artificial light that is created by using an artificial light source daylight illumination by sunlight, in this paper, it is created using the electrical energy it is a paper on the study of technology management scheme and efficient control technology of artificial light.

• Journal of the Korean Vacuum Society
• /
• v.10 no.3
• /
• pp.350-355
• /
• 2001

We have investigated characteristics of ZnSe epilayer grown by molecular beam epitaxy(MBE) on semi-insulating(SI) GaAs by using surface photovoltage(SPV). The measurements of SPV were performed with illumination intensity and modulation frequency. The bandgap energy of ZnSe epilayer was determined from derivative surface photovoltage (DSPV). The five states were observed at room temperature(RT), and those states relate to the impurity and defect formed hetero-interface of ZnSe and GaAs during the sample growth. The observed states represented as a tendency of typical extrinsic transition on the increasing illumination intensity. The 1s and 2s signals related to the excitonic absorption were not observed at RT, but those were presented with the splitted of two peaks in the SPV at 80 K. From the modulation frequency dependence, we obtained the junction conductance and capacitance of the sample.

• Korean Journal of Head & Neck Oncology
• /
• v.26 no.2
• /
• pp.187-192
• /
• 2010

Background and Objectives : LED(Light emitting diode) is recently introduced as a energy-saving light source in many area including agriculture and environment. In medical field it is known as bright and safe light source in surgical lighting including headlight. This study is aimed to test effectiveness and cost-saving of mountain-climbing headlight in comparison with xenon headlight. Materials and Methods : Internet market-available mountain-climbing headlight was compared with medical xenon headlight regarding heat generation after 30 minutes' usage, intensity of illumination and possible burn to the perioral skin. To get temperature data, 5 cases of tonsillectomy were done with the aid of LED headlight, while another 5 tonsillectomies were done using xenon headlight. Results : The temperatures of all light sources were below 45 degrees Celcius until finish of the surgery without burn or complications. No differences in operation time with both headlights. The maximal intensities of illumination were 24000 Lux for xenon, 20000 Lux for LED. Conclusion : Mountain-climbing headlight could be safe and helpful light source with low cost in simple oral surgery.