• Journal of the Korean earth science society
• /
• v.40 no.2
• /
• pp.177-187
• /
• 2019

Several volcanic activities have continued in Mt. Baekdu since the Millennium eruption, and these phenomena have increased the need for volcanic activity surveillance. Various geophysical approaches are needed to obtain the depth and size of magma chamber that lie several kilometers below the surface. We examined the applicability of direct-current resistivity survey in this study. In order to explore the deep magma chamber of Mt. Baekdu, which has a spatial limitation due to the borderline, a large-scale survey with a length of tens of kilometers should be conducted. This type of survey requires a distributed measurement system and optimized exploration designs. Therefore, we propose survey designs taking advantage of our developed distributed acquisition system and analyze the applicability using numerical simulation. We confirmed that our designs that use single survey line with offline transmitting points show comparable results to the conventional 3D survey. It is expected that our research result can contribute to the deep geophysical exploration in Mt. Baekdu.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.4
• /
• pp.421-429
• /
• 2018

Hydrazine based reductive dissolution applied on magnetite oxide was investigated. Dissolution of Fe(II) and Fe(III) from magnetite takes place either by protonation, surface complexation, or reduction. Solution containing hydrazine and sulfuric acid provides hydrogen to break bonds between Fe and oxygen by protonation and electrons for the reduction of insoluble Fe(III) to soluble Fe(II) in acidic solution of pH 3. In terms of dissolution rate, numerous transition metal ions were examined and Cu(II) ion was found to be the most effective to speed up the dissolution. During the cycle of Cu(I) ions to Cu(II) ions, the released electron promoted the reduction of Fe(III) and Cu(II) ions returned to Cu(I) ion due to the oxidation of hydrazine. In the experimental results, the addition of a very low amount of cupric ion (about 0.5 mM) to the solution increased the dissolution rate about 40% on average and up to 70% for certain specific conditions. It is confirmed that even though the coordination structure of copper ions with hydrazine is not clear, the $Cu(II)/H^+/N_2H_4$ system is acceptable regarding the dissolution performance as a decontamination reagent.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.953-959
• /
• 2018

This paper deals with controlling surge oscillations of a mooring vessel system under large external disturbances such as wind, waves and currents. A control synthesis based on Sliding Mode Control (SMC) with a Super-Twisting Algorithm (STA) has been applied to suppress nonlinear surge oscillations of a two-point mooring system. Despite the advantages of robustness against parameter uncertainties and disturbances for SMC, chattering is the main drawback for implementing sliding mode controllers. First-order SMC shows convergence within the desired level of accuracy, in which chattering is the main obstacle related to the destructive phenomenon. Alternatively, STA completely eliminates chattering phenomenon with high accuracy even for large disturbances. SMC based on STA is an effective tool for the motion control of a nonlinear mooring system because it avoids the chattering problems of a first-order sliding mode controller. In addition, the error trajectories of controlled mooring systems implemented by means of STA form in the bounded region. Finally, the control gain effect of STA can be observed in sliding surface and position trajectory errors.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.566-576
• /
• 2018

The C-ITS requires the lane level positioning of the vehicle in the land transportation environment, and it is most effective to utilize the GNSS. In the precision positioning system based on satellite navigation, the evaluation of dynamic environment of lane level positioning performance should be accompanied and the evaluation system configuration should be preceded. In this paper, we selected performance indicators, assessment equipment, and reliability of reference equipment for evaluation of precision positioning user systems based on the GNSS. The performance evaluation system described above is applied to a real system, and the performance evaluation tool developed for the evaluation system is described. The numerical performance evaluation was carried out based on the data collected by carrying out the actual testbed driving. The performance evaluation by the actual driving trajectory and driving image comparison was performed to derive and analyse the evaluation results of the vehicle lane level positioning user system.

• Journal of Korean Society of Forest Science
• /
• v.107 no.4
• /
• pp.385-392
• /
• 2018

The slope stabilization analysis was performed by conducting survey and selecting the representative section in order to improve slope composition and management technology of masonry embankments in the quarry area, The mean slope of the masonry retain wall (A, B, C, D, E, F) was $38.5^{\circ}$, although the steep slope of the lowest slope (A) as $59^{\circ}$. The horizontal distance of the masonry embankments is 66.2 m and the slope height is 48.3 m. However, the inclination of the masonry embankments is relatively steep and visually unstable. The slope stability analysis for the slope stability analysis was taken into account during the drying and saturation. The slope stability analysis during saturation was performed by modeling the fully saturated slope. The strength constants of the ground were divided into two groups. The safety factor for dry period was 1.850 and the safety factor for rainy season was 1.333. The safety rate of dry period and rainy season was above 1.5 and 1.2. However, the weathered granite on the upper part of the masonry embankments at the time of heavy rainfall is considered to have a high risk of slope erosion and collapse. Therefore, it is considered necessary to take measures for stabilization through appropriate maintenance such as drainage installation.

• Journal of the Korean Institute of Gas
• /
• v.23 no.2
• /
• pp.1-8
• /
• 2019

Because of environmental pollution problem, interests in hydrogen energy has been concentrating sharply. Especially in Korea, the market related with fuel cell vehicles and hydrogen refueling stations is increasing actively under the government-led. However, the actual contributions to environmental improvement effect of hydrogen energy is required to be evaluated with representing reality. In this sense, lots of conventional analyzing tools have some limitations to adapt in Korea's situation directly. It is caused by the differences of raw energy market between the US and Korea. That is, most of analytic tools are developed by representing energy market of the US, where can produce variety of raw feed energy sources. Therefore, in this paper, we propose mass balance based numerical analyzing method, which is suitable for the actual hydrogen production process in Korea for exact evaluation of $CO_2$ emission amount in this country. Using proposed method, we has demonstrated reformed hydrogen from natural gas, LPG and naphtha, electrolysis-based hydrogen, and COG-based hydrogen. Furthermore, with the comparison of GREET program analysis results, robustness of numerical analysis method is demonstrated.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.5
• /
• pp.1-12
• /
• 2019

The purpose of this study is to enhance the seismic performance of exposed column-base plate weak-axis connections for small-sized steel buildings. According to the site inspection for the small-sized building construction, the arbitrary connection details in steel buildings have been applied at the job site, which is considered to be insufficient to guarantee structural safety and stability considering the increased seismic risk in Korea. Therefore, a series of test programs had been done to develop enhanced connection details in order to ensue the adequate seismic stability and safety of small-sized steel buildings. From the test results, It was found that the exposed column-base plate weak-axis connections commonly used in Korea shows very poor seismic behavior due to the "Rocking" phenomena caused by the residual plastic deformation of anchor bolts between anchor plate and concrete. A series of hysteretic tests for finding that solution were conducted to reduce the "Rocking" phenomena of the column-base plate connections, and local buckling of webs in H-column. Finally the enhanced stable seismic behavior was obtained by reinforcing at least 8 anchor bolts with good bonding strength and stiffeners to the webs in H-column.

• Journal of Technology Innovation
• /
• v.27 no.2
• /
• pp.73-98
• /
• 2019

This study aims to contribute to the improvement of the patent activity of small and medium-sized enterprises in the future by proposing five strategies for enhancing customized patent activity for small and medium-sized enterprises under the assumption that patent application affects firm performance. The subjects of this study were 25 years of active patent activity, using patent activity statistics for 5 years from 2010 and statistical data of business performance based on 2014. The research procedure was conducted in the order of DEA-BCC efficiency analysis, patent activity analysis, and patent portfolio analysis, and then propose a strategy to improve patent activity. As a result of the research, it was confirmed that 5 industries with high patent activity and IRS type have a substantial effect on improving corporate performance as an industry with high patent efficiency. On the other hand, there are 12 industries in the form of IRS/DRS, and 8 industries with low patent activity, DRS, CRS/IRS mixed type and IRS, and that the efficiency of the patent may vary depending on the characteristics of each industry.

• Journal of Convergence for Information Technology
• /
• v.9 no.8
• /
• pp.274-281
• /
• 2019

This study examined the effects of GATA-3-dependent Th2 cells and IgE inhibition by using PM-E and PM-70M isolated from Sasao. It was analyzed that the 70 % methanol layer contained adsorbed chromatograms of the fraction of sodium hypochlorite that inhibited GATA-3 transcription factor activity. As a result, PM-70 %MFL fraction seems to have an antiallergic effect by inhibiting GATA-3 which regulates Th2 cytokine. PM-30A, PM-70A, and PM-30A layers by inhibiting IgE secretion in B cells by co-culturing the fractions with anti-CD40/rmIL-6 and TNF-${\alpha}$ mRNA and IgE were not different from control. However, expression of IL-6 and TNF-${\alpha}$ mRNA was $0.69{\pm}0.058$ (p<0.001) and $0.72{\pm}0.58$ (p<0.05), respectively. The amount of IgE secretion was $94.6{\pm}16.0$, which was significantly decreased by 45.6% (p<0.01) compared with the control group. This study suggests that the PM-70% MFL layer in the fraction of Sasao contains the components that inhibit the differentiation and activity of B cells.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.277-280
• /
• 2016

Currently, systems for finding missing children are composed of using communication between a QR code and RFID chip, as the use of a smartphone. However, the current systems for finding missing children have limitations in that children can only be found if there are people in the surrounding area; there is an economic burden on parents required to purchase a smartphone for their children; along with difficulties in finding the missing children without the assistance of those in the surrounding area in critical situations such as a kidnapping, due to the limited duration of the battery life. In order to solve such problems, approaches need to be made from two perspectives: having someone in the surrounding area; and absence of anyone in the surrounding area. This thesis is centered on the development of a IoT (Internet of Things) system for finding missing children that combines two methods, namely, the method of finding missing children without a guardian in the surrounding area -within the limited space in which AP is installed by using a beacon and open source hardware being highlighted as the IoT technology - and the method of finding missing children with the smartphone application in which each individual becomes the Access Point (AP). The Main purpose is to provide accurate information of missing children's location for the 2situations and it is found that the accuracy of smartphones APP is 97.7% and security device AP is 91.1%.