• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.5
• /
• pp.41-54
• /
• 2018

In recent years, as interest in youth startup has increased, the Korean government has established various policies to support young entrepreneurs and actively implements such policies. Especially, as a way to promote youth startup, the development of startup clubs in universities is being suggested, and the importance of startup clubs is growing day by day. As reflected in these points, the Korean government is increasing its budget every year to support the startup clubs of universities, and actively supports the funds and space required for the startup clubs of universities. Unfortunately, however, despite the growing importance of startup clubs and the active support of the government for the startup clubs, academic attempts to see how effectively the startup clubs are operating are not enough. For this reason, this study analyzes the effect of entrepreneurship of university start-up club members on the effectiveness of start-up club. More specifically, in this study, entrepreneurship of club members is classified as risk-taking propensity, proactiveness, and innovativeness, as emphasized in previous researches. We empirically analyzed the effects of these independent variables on the effectiveness of the start-up clubs, focusing on the moderating effect of club members' diversity. We conducted empirical analyses on 1112 start-up club members from 12 universities located in Jeollanam-do and Jeollabuk-do, and the analysis results are as follows. First, the entrepreneurship of the start-up club members, namely risk taking propensity, proactiveness and innovativeness, all have a positive effect on the effectiveness of the start-up club. These results are consistent with the emphasis of many previous studies. The higher the tendency to take risks, the more inclined to move forward through difficulties, and the higher the tendency to break out of the existing framework and pursue new things, suggesting that the effectiveness of the club is enhanced. Second, as a result of verifying the moderating effect of the club members' diversity, it was found that club members' diversity moderates the relationship between the proactiveness of club members and club effectiveness in the negative (-) direction. In other words, the positive effect of the entrepreneurship of club members on the effectiveness of the start-up club means that the proactiveness is weakened in the case of a club having members from different major backgrounds. The results of this study are expected to provide meaningful theoretical and practical implications by identifying the influencing factors of the start-up club's effectiveness, which has not received much attention so far.

• Progress in Medical Physics
• /
• v.21 no.2
• /
• pp.201-208
• /
• 2010

Recently, along with technology development of endoscopic equipment, a stent has been developed for the convenience of operation, shortening of recovery times, and reduction of patient's pain. To this end, optimal factors are simulated for the stent structure and mechanical reaction and verified using finite element analysis. In order to compare to present commercialized product such as Zilver (Cook, Bloomington, Indiana, USA) and S.M.A.R.T (Cordis, Bridgewater Towsnhip, New Jersey, USA), mechanical impact factors were determined through Taguchi factor analysis, and flexibility and expandability of all the products including ours were tested using finite element analysis. Also, important factors were sought that fulfill the optimal condition using central composition method of response surface analysis, and optimal design were carried out based on the important factors. From the centra composition method of Response surface analysis, it is found that importat factors for flexibility is stent thickness (T) and unit area (W) and those for expandability is stent thickness (T). In results, important factors for optimum condition are 0.17 mm for stent thickness (T) and $0.09\;mm^2$ for unit area (W). Determined and verified by finite element analysis in out research institute, a stent was manufactured and tested with the results of better flexibility and expandability in optimal condition compared to other products. Recently, As Finite element analysis stent mechanical property assessment for research much proceed. But time and reduce expenses research rarely stent of optimum coditions. In this research, Important factor as mechanical impact factor stent Taguchi factor analysis arrangement to find flexibility with expansibility as Finite element analysis. Also, Using to Center composition method of Response surface method appropriate optimized condition searching for important factor, these considering had design optimized. Production stent time and reduce expenses was able to do the more coincide with optimum conditions. These kind of things as application plan industry of stent development period of time and reduce expenses etc. be of help to many economic development.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.2
• /
• pp.113-121
• /
• 2018

Baekasan Acheon cave located in Hwasun-gun, Jeollanam-do is a natural limestone cave only found in this province. In this study, the mineralogical and geochemical characteristics of speleothems collected from Baekasan Acheon cave were identified and the capability of carbonate mineral formation by aerobic microorganisms enriched from the cave and the mineralogical and geochemical characteristics of carbonate minerals formed by the microorganisms were investigated. The samples of sediments (clay) and speleothems (shelfstone and cave coral) were collected at three sites in the cave. The samples of shelfstone and cave coral were identified mainly as carbonate mineral, Mg-rich calcite, and clay minerals were composed of quartz, muscovite, and vermiculite by X-ray diffraction (XRD) analysis. To cultivate the carbonate forming microorganisms, parts of the sediment and speleothems were placed in D-1 medium containing urea, respectively, and the growth of microorganisms was observed under the aerobic condition at room temperature. The capability of carbonate mineralization of the cultured Baekasan Acheon cave microorganisms was examined through adding 1% (v/v) of the cultured microorganisms and calcium sources, Ca-acetate or Ca-lactate, into the D-1 medium. XRD analysis showed that the microorganisms cultured in cave deposits formed calcium carbonate ($CaCO_3$) under all conditions, and these microbial carbonate minerals included calcite and vaterite. The morphological characteristics and chemical composition of biologically formed minerals were observed by SEM-EDS showed various crystal forms such as rhomboid, spherical, perforated surface with Ca, C, and O of major chemical components. The existence of such microorganisms in the cave can contribute the formation of carbonate minerals, and it is likely to affect the geochemical cycles of carbon and calcium in the cave.

• Journal of Korean Society of Forest Science
• /
• v.82 no.3
• /
• pp.235-245
• /
• 1993

This study was carried out to understand the stand structure based on the compositional characteristics of natural deciduous forest dominated by Quercus species, which will provide with fundamental ecological and silvicultural information for effective forest management. Of two tracts selected from the Seoul National University Research Forests, one is located in Kwangju-Gun Kyunggi-Do, and the other in Kwangyang-Gun Chollanam-Do. Point-quarter sampling method w-as employed to survey woody vegetation confined to larger than 6cm in DBH. The numbers of sample points were 152 and 187, in Kwangju-Gun and Kwangyang-Gun, respectively. Comparative analysis for two forest tracts was made as follows ; 1) species composition by calculation of importance values ; 2) number of stems per hectare for major tree species ; 3) species diversity for the forests in two locations ; 4) inter-species association based on $X^2$ test. The relative dominate of Quercus speices showed 88% at Kwangju-Gun, Kyunggi-Do and 50% at Kwangy-ang-Gun. Chollanam-Do. Such high dominance occurred due to high importance values of Quercus variahilis and Q. mortgolica in both locations. Quercus serrata showed low value at Kwangju-Gun. Kyunggi-Do whereas Q. acutissirna, Q. dentata and Q. aliena did none at Kwangyang-Gun. Chollanam-Do. The species diversity and evenness in oak communities exhibited 0.82 and 0.61, respectively at Kwangju-Gun. Kyunggi-Do, while those did 1.09 and 0.73 at Kwangyang-Gun, Chollanam-Do. Therefore, it was considered that Ku-angju-Gun region was disturbed severely by human activities but Kwangyang-Gun region eras less disturbed. Frequent appearance of Carpinus and Acer species indicates increase in diversities and better development of succession at Kwangyang-Gun region.

• Clinical and Experimental Pediatrics
• /
• v.50 no.2
• /
• pp.151-156
• /
• 2007

Purpose : Streptococcus pneumoniae is a major etiologic agent for pneumonia, meningitis, otitis media, and sepsis among young children. Multi-drug resistant strains have raised great concern worldwide, thus the importance of prevention with vaccines has been emphasized. However, vaccines may force the appearance of pneumococcal infections by nonvaccine serotypes. Thus, distribution of pneumococcal serotypes should be monitored to estimate vaccine efficacy. We used a new and efficient multibead assay in determining pnemococcal serotypes. Methods : From January to February 2005, 643 children were recruited from ten day care centers to isolate pneumococci from their oropharynx. Pneumococcal serotyping was performed on 62 pneumococcal isolates from 60 children by multibead assay. This immunoassay required two sets of latex particles coated with pneumococcal polysaccharides and serotype-specific antibodies. Twenty four newly developed monoclonal antibodies specific for common serotypes and a pool of polyclonal rabbit sera for some of the less common serotypes were used. Results : The most prevalent pneumococcal serotypes were serotype 6A, 19A, 19F, 23F, and 11A/D/F which accounted more than 50 precent of all the 62 pneumococcal isolates. We found that multibead assay can be performed very rapidly and objectively. Conclusion : This multibead immunoassay was very useful in serotyping clinical isolates of S. pneumoniae because it was simple, reliable and fast.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.7
• /
• pp.1039-1045
• /
• 2003

Functional healthy drinks were processed with freeze dried powders of ethanol extract from of defatted safflower (Carthamus tinctorious L.) seed cake and some useful components of the drinks were investigated. Yield of freeze dried powder was the highest as 8.42% when it extracted with 60% ethanol (60% EFDP). Each drink contained 0.02% of freeze dried powder and ranged 10.6∼13.8% of soluble solid, 2.90∼3.68 of pH, 0.10∼0.83% of titratable acidity. ‘L’ value of drink-I (DSD-I) was the highest as 94.82$\pm$2.45, ‘b’ and ‘a’ value of drink-V (DSD-V) was highest as 27.15-2.65 and 28.67$\pm$2.69, respectively. Major free sugars of drink were 6015.3∼7918.2 mg% of glucose and 1511.4∼2091.0 mg% of sucrose. The content of citric acid was the highest as 179.2∼981.3 mg%. The content of total phenol in 60% EFDP was 99.17 mg% and that of drink-II(DSD-II) and DSD-V was 307.84 mg% and 224.06 mg%, respectively. Total flavonoid was contained as 50.29 mg% in 80% ethanol extract (80% EFDP) and 125.20 mg% in DSD-V. N-[2-(5-hydroxy-1H-indol-3-yl) ethyl] ferulamide (serotonin-I) was determined as high as 18.81 ppm in 80% EFDP and ranged 2.42∼2.89 ppm in drinks. N-[2-(5-hydroxy-lH-indol-3yl)ethyl]-p-coumaramide (serotonin-II) was determined as 30.17 ppm in 80% EFDP and ranged 3.79∼4.59 ppm in drinks. Acacetin, flavonoid compound were 9.83 ppm in amyloglucosidase hydrosis + 60% ethanol extract (A + 60% EFDP) and ranged 0.98∼1.26 ppm in drinks. Electron donating ability (EDA, %) was measured and compared with 100 ppm BHA as chemical antioxidant. EDA was 93.97$\pm$2.21% in A+60% EFDP, 94.79$\pm$2.26% in DSD-I, 94.69$\pm$1.37% in DSD-II, and 93.83$\pm$1.49% in BHA. DSD-II added with hot water extract solution from Korean ginseng and safflower yellow pigment recorded the highest sensory score.

• Journal of Korean Society of Forest Science
• /
• v.95 no.3
• /
• pp.350-357
• /
• 2006

For the purpose of this study, the characteristics of surface flow through the survey of rainfall intensity and degree of slope on fire sites by using rainfall simulator was examined and analysed. And also the relationship between the amount of surface flow and rainfall intensity, degree of slope and elapsed year after forest fire occurrence influencing on the surface flow were analysed. The results obtained were as follows: 1. The amount of surface flow by year of occurrence of forest fire was increased 2,2 to 3,2 times as rainfall intensity was increased by 30 mm/hr, and 1.5 to 1.9 times as degree of slope was increased by $10^{\circ}$, 2, Even though ground vegetation in forest fire sites was recovered more than 80%, the amount of surface flow in initial rainfall was relatively much and it seemed that vegetation didn't play substantial roles in reducing runoff. 3, The amount of surface flow by rainfall intensity and degree of slope in accordance with elapsed years after forest fire was reduced 22,3% to 41,8% in three years after fire as compared to the first year of fire occurrence. The amount of surface flow were significantly differentiated by rainfall intensity and degree of slope in the first year of fire occurrence and the difference were gradually reduced afterwards. 4. In the analysis on influences of each factors on the amount of surface flow on forest fire sites, the amount of surface flow was significant differences in major impacts of each rainfall intensity, degree of slope and elapsed year after fire and interaction of rainfall intensity ${\times}$ degree of slope and rainfall intensity ${\times}$ elapsed year after fire, but no differences were observed in interaction of degree of slope ${\times}$ elapsed year after tire and rainfall intensity ${\times}$ degree of slope ${\times}$ elapsed year after tire. Rainfall intensity was the most affecting factor on the amount of surface flow and followed by degree of slope and elapsed year after fire.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.6
• /
• pp.720-726
• /
• 2007

This study was performed to investigate effects of raw sea tangle products on idiopathic constipation. A total of thirty-eight women participated voluntarily in this study. They were placed into one of four groups by their total colonic transit time (TCTT) to make the four groups have the same TCTT. In the first trial, the subjects in Control group were fed 3 times of 150 mL of mineral water per day for 2 weeks, those in +Control group were fed a kind of stool softener as well as the same mineral water for 3 times, those in STT group were fed 3 times of 150 mL of sea tangle tea and those in STB group were fed 3 times of 150 mL of sea tangle beverage. After 6 weeks, a second trial was performed for another 2 weeks. Although the TCTT of the group exposed to of KolomarkTM was not significantly reduced, the subjects in STT group answered that their evacuation activities were significantly improved; evacuation frequency was increased, stool hardness was reduced, evacuation straining was lessened, stool amount was increased, incomplete sense of evacuation was lessened, and major evacuation time was improved like those in +Control group. The results imply that it is worthy to develop some products of raw sea tangle such as STT, which are effective in treating or preventing constipation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.10
• /
• pp.1484-1491
• /
• 2015

The new cultivar Lentinula edodes, which is named 'Lentinula edodes GNA01', was bred by mating strains isolated from 'L26' and 'Kyoungwon9015' obtained from Sammyungjin Research Institute, Fujian, China. L. edodes GNA01 does not have stipes like L. edodes, although it generally has a similar spherical shape. Moisture and crude protein contents of L. edodes GNA01 were lower than those of L. edodes. Meanwhile, L. edodes GNA01 contained higher levels of crude ash, crude lipid, crude fiber, and carbohydrates than L. edodes. The ${\beta}$-carotene content ($19.05{\mu}g/100g$) of L. edodes GNA01 was about three times higher than that of L. edodes. In addition, vitamin D content ($118.53{\mu}g/100g$) of L. edodes GNA01 was more than twice that of L. edodes. L. edodes GNA01 was a good source of mineral elements, with K and Mg contents of 2,277.50 mg/100 g and 203.15 mg/100 g, respectively. The major fatty acids of L. edodes GNA01 were C16:0 and C18:2, and L. edodes GNA01 had the highest linoleic acid (C18:2) content of 1,087.66 mg/100 g. Total phenol content of L. edodes GNA01 was 12.52 mg GAE/g, and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activities and ferric reducing antioxidant power (FRAP) values of L. edodes GNA01 were lower than those of L. edodes at all concentrations. However, DPPH radical scavenging activities and FRAP values of L. edodes GNA01 were above 80% and 0.9 at a concentration of 10 mg/mL, respectively.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.